Repository navigation
Ferrite Console 0.8.2 (alpha)
Ferrite 0.8.2 (alpha)
Auto reply for APRS, bigger menu text, T9 on # and the station's format on the broadcast card; Ferrite Console's Live View gets a slot panel you can tune from. Several of these came from our alpha testers: thank you.
Firmware
- Auto reply. The radio answers APRS messages while you're away, as Kenwood radios do.
MENU 0 5 9 9: turn it on, choose who gets a reply (*everyone,VE7*every callsign starting VE7, or one callsign), the delay (10 seconds to 2 minutes) and the message (up to 45 characters). Each station gets one reply in 30 minutes, so two radios on auto reply don't answer each other forever. Services, acks and your own callsign never get one. - GWALL joins the APRS services in the address book: the APRS graffiti wall. Send it
?for its instructions. Suggested by Daria. - The quick menu and the shortcut popups close faster. Holding
*opens the quick menu at once, but closing it used to redraw slowly; it now takes about half the time (about 80 ms from 150 on our bench). A shortcut's popup (hold a digit) no longer redraws the screen under it while it's up, and closes the same quicker way. - Bigger menu text. The menus (
MENU 0) are in 14 px text, up from 12, in taller rows, and every name and value shows whole. A few settings have shorter names to fit: Channel shows, Coordinates, GPS off during (Never, Receive, Transmit, Both), Layout, Power-on text, Wake on, Key light, Start delay, Tail removal. Your settings don't change. - The station's format on the broadcast card. When an FM station sends its programme type (RDS PTY), the card's top line names it in place of Broadcast: "VFO · Jazz", "012 · News". Canada and the US use the North American list, other regions the European one.
- T9 is on # in messages. In a message,
#now goes round T9 (word by word), abc, ABC and 123, and the screen says which. It used to be behind hold*. T9 starts a sentence with a capital by itself. Suggested by Daria. - Callsigns type only what a callsign can hold. A contact's callsign, auto reply's pattern and the APRS path take capitals, digits and
-(key 1 has-); your own callsign has-and/there. Reported by Daria. - About shows the SI4732's revision (the FM and HF receiver chip): its firmware, chip and component revisions, read when the radio starts.
- The Status page's Beacon row shows the beacon's mode (Off, Manual, Every N min, Smart). It said "Off" whatever the beacon was set to.
- For Ferrite Console and apps: the radio sends its state (each slot's channel or frequency, signal, scanning, battery, GPS) as one message, and takes tuning commands (a channel, up and down, zone, scan) that go through the same checks as the keys.
Ferrite Console
- Auto reply on the APRS settings page: on or off, who gets a reply, the delay and the message, under Advanced. It needs Ferrite 0.8.2 on the radio; with an older one the page shows them read only.
- Live View's slot panel works on every screen, not only home, and each slot has buttons: up and down, zone (or band), scan, a channel by number; click a slot's letter to make it active. Needs Ferrite 0.8.2.
- An APRS settings backup saved with Console 0.8.1 still restores, with auto reply off.
Updating
A radio on 0.8.0 or 0.8.1: Console's Update page, or Install › Advanced with ferrite-0.8.2.ffw. Your channels and settings stay; auto reply starts off.
Before you start
- Read the known issues in the user guide (chapter 12).
- Keep your backup file somewhere safe, off the computer too.
- Questions: the Ferrite Discord, https://discord.gg/fYygBVD2Kx
- Bugs, ideas and design suggestions: github.com/FerriteFW/ferrite/issues. Issues help us most; we'd rather have one than an AI-generated pull request (CONTRIBUTING.md).