Repository navigation
Ferrite Console 0.8.3 (alpha)
Ferrite 0.8.3 (alpha)
Firmware
-
The heard list names the alternate symbols right. A station using APRS's alternate symbol table showed under the wrong name: a house (HF) as a handheld, an SUV as a truck, a work zone as a car, "radios and devices" as a boat, a wall cloud as a handheld. They now follow the APRS 1.2 tables.
-
# is help. A single
#on home opens the help pages, starting with every hold (ABC, V/M, MENU, BACK, *, # and the ten digits), then the keys, side keys and menu numbers;#again for the next page,BACKto leave. The boot screen says so. The Status page is nowMENU 0 0. While a watched slot is receiving,#still pauses watch. -
The A·B·C key is called ABC, as it is printed, on the radio and in the guide. The home hint bar says Hold ABC: Edit, the slot's settings, in place of "SLOT A·B·C".
-
The APRS list loses "Beacon on/off". It only paused timed beacons, did nothing with Manual and showed no state. The beacon is set in one place,
MENU 0 5 6 1; the list's last three rows move up one (5 Event log, 6 Clear the heard list, 7 APRS settings). -
The channel editor's top line no longer cuts the channel number: the zone box now starts after it (CH 1000 and up too).
-
The zone editor's priorities show the channel's name (number and name together were cut at the right edge).
-
Home keeps updating under "PTT stuck". The popup stays up as long as PTT is held; home's receive and transmit state no longer freeze under it.
-
Beacon now from the link. Ferrite Console (and later the phone app) can send a position beacon, with the same checks as the radio's own Beacon now.
-
Tuning from Console behaves better. A scan started from Console no longer replaces the screen you are using on the radio (the scan screen opens only over home); in channel-only mode Console can tune only the active slot; the APRS slot no longer reports its parked channel.
Ferrite Console
- Beacon now in Live View's side panel, beside Heard now. Needs Ferrite 0.8.3.
- Live View's slot panel no longer shows a stale value after a full refresh crossed a change on the radio.
Updating
A radio on 0.8.x: Console's Update page, or Install › Advanced with ferrite-0.8.3.ffw. Your channels and settings stay.
Before you start
- Read the known issues in the user guide (chapter 12).
- Keep your backup file somewhere safe, off the computer too.
- Questions: the Ferrite Discord, https://discord.gg/fYygBVD2Kx
- Bugs, ideas and design suggestions: github.com/FerriteFW/ferrite/issues. Issues help us most; we'd rather have one than an AI-generated pull request (CONTRIBUTING.md).