Skip to content

Ferrite Console 0.8.4 (alpha)

Choose a tag to compare

@infamy infamy released this 13 Nov 08:40
· 84 commits to main since this release
30cf555

Ferrite 0.8.4 (alpha)

Firmware

  • APRS quick page. Hold ABC on the APRS slot (APRS mode, KISS or beacons alone) for a 3 × 3 grid of the APRS settings you change most: APRS mode, Beacon, Power, Frequency, Path, Digipeat, Beacon text, Text rate and Symbol. The knob changes the cell; the help box shows the setting's menu number, and the whole value when the cell has to cut it.
  • Beacon text rate (MENU 0 5 6 5): send the beacon text on every beacon (All), or every 2nd, 4th or 8th. The first beacon always carries it, and so do Beacon now and answers to queries.
  • A signal shows sooner. At rest the screen showed a squelch opening or closing on its next scheduled redraw, about 270 ms later. It now redraws at once: about 100 ms, still at the low clock speed, so it costs no extra battery.
  • Tuning is faster. The radio talks to its two receiver chips about 2.6 times as fast as before (checked on three radios, with margin), so a retune, a slot change or a watch hop takes about 1.8 ms of chip work instead of 4.6. If a chip doesn't answer correctly at the faster speed at power-on, the radio stays at the old speed.
  • Less work while idle. Home no longer reads the flash on every redraw (the APRS card's counts and messages, the zone names), and the settings check behind the automatic save is much lighter. With the screen dark the processor is busy about 33 % of the time instead of 38-40 %, and a redraw at rest takes about 20 ms instead of 30.
  • Settings wear the flash less. Saves now share their flash sector: six saves per erase instead of one, and a power cut during a save still leaves the previous settings whole. Changes save 2-2.5 s after your last change (it was 2 s).

Ferrite Console

  • Version 0.8.4, with Ferrite 0.8.4 bundled. No other changes.

Updating

A radio on 0.8.x: Console's Update page, or Install › Advanced with ferrite-0.8.4.ffw. Your channels and settings stay.

Going back to 0.8.3 or older after this update brings back older settings: those versions read only the first saved record in each settings sector. Channels and everything else stay.

Before you start

  • Read the known issues in the user guide (chapter 12).
  • Keep your backup file somewhere safe, off the computer too.
  • Questions: the Ferrite Discord, https://discord.gg/fYygBVD2Kx
  • Bugs, ideas and design suggestions: github.com/FerriteFW/ferrite/issues. Issues help us most; we'd rather have one than an AI-generated pull request (CONTRIBUTING.md).