Skip to content

Releases

v1.4.1 - Pico firmware that stays awake on the PS3

Choose a tag to compare

@Gabarsolon Gabarsolon released this 07 Nov 23:32

🚀 Buzz! Bridge v1.4.1: Pico firmware that stays awake on the PS3

✨ What's new

  • Pico firmware 1.4.1 (buzz_bridge_modec2.uf2): on a real PS3, the console disabled the Pico's DualShock pad about 14 minutes into a session (the saved request log shows the PS3's disable command), and the pad then stayed dead until the Pico was reflashed. This firmware adds two changes:
    • small, bounded noise on the DualShock's motion-sensor bytes, like a real pad (jitter on|off over the debug port, on by default);
    • up to three delayed automatic PS-button presses after a PS3 disable, so a disable cannot leave the pad dead until a reboot.
  • Buttons, sticks, pressures, the buzzer-bit decoding and Modes A and B are unchanged. The PS2 patcher (buzz-bridge-ps2.exe, layout 14) is the same as in v1.4.0.

📦 Download Assets

File What
buzz-bridge-pico-v1.4.1.zip the pico/ folder: firmware (UF2), source, PC helpers, docs, README with wiring and steps
buzz_bridge_modec2.uf2 the Pico firmware (drag onto the RP2350 drive in BOOTSEL)
buzz_bridge_modec2_recovery.uf2 recovery image that forces the debug COM port on
buzz-bridge-ps2.exe the PC ISO patcher with layout 14 (unchanged from v1.4.0)
SHA256SUMS.txt checksums

To update: hold BOOTSEL, plug the Pico into the PC, copy buzz_bridge_modec2.uf2 onto the RP2350 drive. The saved mode (config c 0) is kept.

✅ Tested

Native tests of the new code pass: jitter bounds and determinism, the PS-retry state machine, and the unchanged report bytes of Modes A and B. The v1.4.0 firmware's Mode C (four handsets and game lamps through one DualShock pad, stock netemu, CFW PS3, Buzz!: The Schools Quiz) was confirmed by the owner.

⚠️ Not tested or not supported

  • The 1.4.1 firmware itself has not been run on a PS3. Whether the jitter and the PS retries keep the pad alive over a long idle is unproven. The 14-minute disable is established by the log; its cause (an idle timeout) is a hypothesis.
  • If the pad dies again: hold P1 red + P1 blue for 5 seconds, plug the Pico into the PC and run python pico/tools/bridge_cli.py ds3log, then send the saved log.
  • HEN, other games, other dongles and the original Pico (RP2040) are untested.
  • BuzzBridge.pkg is not part of this release (see v1.4.0).

v1.4.0 - Pico adapter: four real buzzers and game lamps on a stock PS3 emulator

Choose a tag to compare

@Gabarsolon Gabarsolon released this 07 Nov 20:14

🚀 Buzz! Bridge v1.4.0: a Pico adapter gives four real buzzers and game lamps on a stock PS3 PS2 emulator

✨ What's new

  • Pico 2 adapter (pico/): a Raspberry Pi Pico 2 sits between a wired Buzz! dongle and the PS3 and shows up as one DualShock 3. All four handsets come in through that one pad, and the game's own buzzer lamps go back out as pad vibration. Nothing is replaced in the console's flash: the stock ps2_netemu.self stays.
  • PS2 patcher, layout 14 mode_c (menu entry 8): a new bbusbd.irx reads the 20 buzzer bits from the Pico's pad and sends the game's lamp reports back. Layouts 0-13 and the saved config format are unchanged.
  • The Pico firmware also has Mode A (dongle copy, 2 handsets) and Mode B (two pads, 4 handsets without game lamps) for testing.
  • Firmware source, PC helpers (bridge_cli.py, flash.py) and docs are in pico/. The wiring is four wires from a USB-A socket to the Pico.

📦 Download Assets

File What
buzz-bridge-pico-v1.4.0.zip the pico/ folder: firmware (UF2), source, PC helpers, docs, README with wiring and steps
buzz_bridge_modec.uf2 the Pico firmware (drag onto the RP2350 drive in BOOTSEL)
buzz_bridge_modec_recovery.uf2 recovery image that forces the debug COM port on
buzz-bridge-ps2.exe the PC ISO patcher with layout 14 (Windows). On Linux/macOS: python3 ps2/buzz_bridge_ps2.py
SHA256SUMS.txt checksums

✅ Tested

On one CFW PS3 slim (Evilnat 4.93, stock ps2_netemu.self restored) with a Pico 2 H and a wired Namtai dongle (USB 054C:1000), Buzz!: The Schools Quiz: Mode B gives four handsets, and Mode C gives four handsets plus the game's lamps (owner-confirmed). The saved PS3 request log shows a normal DualShock startup and about 80,000 input reports without a failure. 50 PS2 patcher tests, 6,049 native checks and the repository test groups pass.

⚠️ Not tested or not supported

  • HEN: nothing needs to be replaced on the console, so it should work, but it has not been tried on HEN.
  • Games other than The Schools Quiz, other PS3 models, other dongles, the original Pico (RP2040). Mode C needs the ISO patched with layout 14, and the Pico dedicated as controller 1.
  • BuzzBridge.pkg is not part of this release and was not rebuilt: its source follows the new module hash, but the v1.3.0 package still contains the older patcher module, so use the PC patcher for layout 14. v1.3.0's BuzzBridge.pkg and ps2_netemu.self still apply to their own routes.
  • Building the firmware yourself is only described as a reference (pico/tools/build_modec.py); the UF2s are what was tested.

v1.3.0 - four real buzzers in PS2 games on a PS3, rebuilt PS3 app

Choose a tag to compare

@Gabarsolon Gabarsolon released this 30 Oct 22:34

🚀 Buzz! Bridge v1.3.0: all four real buzzers in PS2 games on a PS3, and a rebuilt PS3 app

✨ What's new

  • Modified ps2_netemu.self (CFW only): PS2 Buzz! games on a PS3 now see all four real buzzers of a wired dongle, with working buzzer lamps (menu blink, buzz-in), and no ISO patching: your game images stay untouched. Install and restore with the included scripts (Windows PowerShell, or bash for Linux/macOS). Every install backs up your own file first, reads the new one back to check it, and no restart is needed.
  • Buzz! Bridge app (BuzzBridge.pkg) is now a menu:
    1. phones and DualShocks for PS3 Buzz! games (as before),
    2. install / check / restore the modified ps2_netemu.self from the PS3 itself (backup first, hash-verified write, automatic rollback on failure),
    3. patch a PS2 ISO in place on the PS3 (CFW) with a restore.
  • PS3 app fixes: readable at 480i / 576i / 720p / 1080p, no flicker on interlaced output, ISOs over 2 GB are listed, Circle goes back one level, a heartbeat log (/dev_hdd0/tmp/buzzbridge_heartbeat.log) and a 15-minute idle exit.
  • PC patcher: menu entry 6 is a ready-made "buzzers + 2 DualShocks" setup; the pairs question for entry 7 now explains what counts as a pair.

📦 Download Assets

File What
ps2_netemu.self the modified PS2 emulator file (CFW), sha256 74e890bf7f77edfd92d4c0a57f45e73cf7fe39aa3c21cd7587948fb3c81ade40
ps2_netemu-installer-v1.3.0.zip the same file plus install / restore scripts (.ps1 and .sh) and a README
BuzzBridge.pkg the PS3 app (CFW); includes the modified netemu and the original for restore
buzz-bridge-ps2.exe the PC ISO patcher (Windows). On Linux/macOS: python3 ps2/buzz_bridge_ps2.py from the source
SHA256SUMS.txt checksums

✅ Tested

On one CFW PS3 slim (Evilnat 4.93 + Cobra) with a wired Namtai dongle (USB 054C:1000), Buzz!: The Schools Quiz: four buzzers, lamps, installing and restoring ps2_netemu.self, and the PS3 app (menus, ISO list, 576i display, install).

⚠️ Not tested or not supported

  • HEN: the netemu route needs CFW (HEN cannot replace the file in flash). The app's ISO patcher is for CFW. The phones/DualShock helper is untested on HEN.
  • Other consoles, firmware versions and dongles. A genuine Logitech dongle (054C:0002) is accepted but untested.
  • One dongle (four buzzers) through the netemu route. DualShock and eight-player setups use the ISO patcher.
  • The Linux/macOS scripts have only had a syntax check, not a run against a console.
  • The app's long-idle freeze that was seen once on an earlier build is not confirmed fixed; this build adds a heartbeat log and a lighter idle loop to track it down. If you see it, please send /dev_hdd0/tmp/buzzbridge_heartbeat.log.

🔧 Install the modified netemu

Windows: powershell -NoProfile -ExecutionPolicy Bypass -File .\install.ps1 -Ps3Host <your PS3 IP> · Linux/macOS: ./install.sh <your PS3 IP>. The PS3 must be at the XMB with webMAN MOD running. Undo with restore.ps1 / restore.sh, or from the app. Details in netemu/README.md.

ps2_netemu.self is a patched copy of a firmware file. Use it only on your own console and keep the backup the installer makes. No game data is included.

Buzz! Bridge v1.2.1: up to 8 players, any controller, any slot

Choose a tag to compare

@Gabarsolon Gabarsolon released this 28 Oct 11:50

🚀 Buzz! Bridge v1.2.1

The PS2 patcher now supports more than 2 controllers: up to 8 players, any mix of real Buzz! buzzers and DualShocks, and the controllers can sit on any slot. No extra hardware, no CONFIG files and no fiddling with controller slots.


🎮 PS2 games: "More than 2 controllers" (menu entry 6)

Pick entry 6 and the patcher asks two things, each with a [default: …]:

  1. How many pairs of Buzz! buzzers do you have? (0–2, each pair = 2 players)
  2. How many DualShocks do you have?

Then it lists every way you can play with them and you pick one. Every DualShock you share (left half = one player, right half = another) adds a player, up to 8. Example with 1 pair of buzzers and 3 DualShocks:

  1)  5 players: 1 pair of Buzz! buzzers + 3 DualShocks, one player each
  2)  6 players: 1 pair of Buzz! buzzers + 2 DualShocks, one player each + 1 DualShock shared by two players
  3)  7 players: 1 pair of Buzz! buzzers + 1 DualShock, one player each + 2 DualShocks shared by two players
  4)  8 players: 1 pair of Buzz! buzzers + 3 DualShocks shared by two players

Entries 1–5 are the setups from v1.1.0, unchanged (no questions).

  • 🔎 The patch reads all 8 controller slots (1-A to 1-D and 2-A to 2-D). Every controller it finds gets its own player and keeps it. A controller that drops out gets its player back if it returns within about 3 seconds.
  • 🕹️ Why it matters on a PS3: the PS3's PS2 emulator (ps2_netemu) puts each controller on a slot by itself, and a controller can only be moved with its own PS button (a DualSense can't). With these setups it doesn't matter which slot a controller lands on.
  • 🔴🔵🟠🟢🟡 Whole DualShock = one player, any button: 🔴 red = L1/L2/R1/R2 (also Select/Start/L3/R3), 🔵 blue = ↑ or △, 🟠 orange = ← or □, 🟢 green = → or ○, 🟡 yellow = ↓ or ✕. Shared DualShock: left half is one player (L1/L2 red, ↑ blue, ← orange, → green, ↓ yellow), right half is another (R1/R2 red, △ blue, □ orange, ○ green, ✕ yellow).
  • 🎙️ Buzzers: plug the Buzz! buzzers in before you start the game. The first controller on the lowest slot counts as the buzzer pad (with 2 pairs: the first two).
  • 👥 More than 4 players only works in the quiz games made for two buzzer sets: Big, Sports, Mega, Hollywood, Pop and Schools Quiz, Brain of…. Buzz! Junior and The Music Quiz have 4 players.
  • ℹ️ No extra hardware is needed: the patch uses the built-in multitap of the PS3's PS2 emulator or of PCSX2. In PCSX2 tick Settings → Controllers → Global Settings → Multitap on Console Port 1/2.
  • 🐛 On a PS3, only the first controller slot used to be read, because ps2_netemu answers the multitap commands in a different form than PCSX2. The patch now understands both.

✅ Tested:

  • PS3 (CECH-25xx, Evilnat CFW): Buzz! The Schools Quiz with real Buzz! buzzers + a DS3 + a DualSense.
  • PCSX2 v2.8.2: Schools Quiz with 4 and 8 controllers; Buzz! Junior (Jungle Party, Ace Racers, Dino Den, Monster Rumble, RoboJam) with the normal setups.
  • Automated: 550+ module checks, patcher and exe tests.

⚠️ Not tested on real hardware yet: shared DualShocks and the other combinations of entry 6, two pairs of buzzers, 5–8 players, PS3 HEN, and games other than the ones above. Please report results in an issue!

The module source of the PS2 patcher is in ps2/universal/. Instructions: ps2/README.md


🎮 PS3 games: phones and DualShocks as Buzz! buzzers (unchanged)

BuzzBridge.pkg is the same as in v1.1.0. 📱 Phones (http://<PS3-IP>:8420/) and 🕹️ DualShocks act as buzzers, up to 8 players. Tested on CFW; signed for PS3HEN, untested. ps3/README.md

💻 PCSX2 on PC: phones as Buzz! buzzers (unchanged)

pcsx2/README.md


📦 Download Assets

  • buzz-bridge-ps2.exe: PS2 ISO patcher for Windows (double-click and drag your extracted .iso into the window). It writes a patched copy and never changes your original ISO.
  • BuzzBridge.pkg: PS3 app + plugin. Install it from the XMB (Package Manager → Install Package Files).
  • BuzzBridge-v1.2.1.zip: everything: the PS2 patcher (exe, Python source and module source), the PS3 PKG and plugin files, and the PCSX2 phone server.

No game data is included. You need your own copies of the games.

Buzz! Bridge v1.2.0: up to 8 players, any controller slot, second buzzer pair

Choose a tag to compare

@Gabarsolon Gabarsolon released this 28 Oct 10:52

🚀 Buzz! Bridge v1.2.0

The PS2 patcher now supports more than 2 controllers: up to 4 or 8 players, each with a whole DualShock, and the controllers can sit on any slot. No extra hardware (it uses the built-in multitap of the PS3's PS2 emulator or of PCSX2) and no fiddling with controller slots. It also adds a second pair of real buzzers.


🎮 PS2 games: new setups with more controllers (menu 6–9)

Menu Setup Players
6 Buzz! buzzers + 2 DualShocks (any slots) 4
7 4 DualShocks (any slots) 4
8 2 pairs of Buzz! buzzers + 4 DualShocks (any slots) 8
9 8 DualShocks (any slots) 8

Menu 1–5 are the setups from v1.1.0.

  • 🔎 The patch reads all 8 controller slots (1-A to 1-D and 2-A to 2-D). Every controller it finds gets its own player and keeps it. A controller that drops out gets its player back if it returns within about 3 seconds.
  • 🕹️ Why it matters on a PS3: the PS3's PS2 emulator (ps2_netemu) puts each controller on a slot by itself, and a controller can only be moved with its own PS button (a DualSense can't). With these setups it doesn't matter which slot a controller lands on.
  • 🔴🔵🟠🟢🟡 Each DualShock is one player and either half works: 🔴 red = L1/L2/R1/R2 (also Select/Start/L3/R3), 🔵 blue = ↑ or △, 🟠 orange = ← or □, 🟢 green = → or ○, 🟡 yellow = ↓ or ✕.
  • 🎙️ Buzzers: plug the Buzz! buzzers in before you start the game. The first controller on the lowest slot counts as the buzzer pad (setup 8: the first two).
  • 👥 8 players only work in the quiz games made for two buzzer sets: Big, Sports, Mega, Hollywood, Pop and Schools Quiz, Brain of…. Buzz! Junior and The Music Quiz have 4 players.
  • 🐛 Fixed: on a PS3, only the first controller slot was read. ps2_netemu answers the multitap commands in a different form than PCSX2; the patch now understands both.
  • 🧹 The patcher menu shows 9 setups with an aligned player column. The older fixed-slot layouts are only available on the command line (--layout).

✅ Tested:

  • PS3 (CECH-25xx, Evilnat CFW): Buzz! The Schools Quiz with real Buzz! buzzers + a DS3 + a DualSense (setup 6).
  • PCSX2 v2.8.2: Schools Quiz with 4 and 8 controllers; Buzz! Junior (Jungle Party, Ace Racers, Dino Den, Monster Rumble, RoboJam) with the normal setups.

⚠️ Not tested yet: PS3 HEN, setups 8 and 9 (8 players and the second buzzer pair) on a PS3, and games other than the ones above. Please report results in an issue!

The module source of the PS2 patcher is in ps2/universal/. Instructions: ps2/README.md


🎮 PS3 games: phones and DualShocks as Buzz! buzzers (unchanged)

BuzzBridge.pkg is the same as in v1.1.0. 📱 Phones (http://<PS3-IP>:8420/) and 🕹️ DualShocks act as buzzers, up to 8 players. Tested on CFW; signed for PS3HEN, untested. ps3/README.md

💻 PCSX2 on PC: phones as Buzz! buzzers (unchanged)

pcsx2/README.md


📦 Download Assets

  • buzz-bridge-ps2.exe: PS2 ISO patcher for Windows (double-click and drag your extracted .iso into the window). It writes a patched copy and never changes your original ISO.
  • BuzzBridge.pkg: PS3 app + plugin. Install it from the XMB (Package Manager → Install Package Files).
  • BuzzBridge-v1.2.0.zip: everything: the PS2 patcher (exe, Python source and module source), the PS3 PKG and plugin files, and the PCSX2 phone server.

No game data is included. You need your own copies of the games.

Buzz! Bridge v1.1.0

Choose a tag to compare

@Gabarsolon Gabarsolon released this 27 Oct 22:53

🚀 Buzz! Bridge v1.1.0

The PS2 patcher is now universal: one patch for PS2 Buzz! games, no game-specific code. Buzz! Junior games work too.


🕹️ PS2 games: universal patcher (new)

  • 🔌 Virtual Buzz! dongle: the patcher replaces the game's USB driver (USBD.IRX) with bbusbd.irx, which shows the game a wired Buzz! dongle. The game's own buzzer driver stays unmodified.
  • 🎮 DualShocks as buzzers, up to 4 players. When you start the patcher, it asks which controllers you have:
    • buzzers only
    • buzzers + DualShock
    • two DualShocks, each split between two players
    • two DualShocks, one player each
    • one DualShock, split between two players
  • 🖱️ Easy to use: double-click buzz-bridge-ps2.exe and drag your ISO into the window, or drop the ISO onto the exe. It writes a patched copy and never changes your original ISO.
  • 🌴 Buzz! Junior support: some games never read the controllers themselves. The patcher can read them instead with --poll auto, and the setup turns this on.
  • ✅ Tested in PCSX2 v2.8.2: Buzz! The Schools Quiz, Buzz! Junior: Jungle Party, Ace Racers, Dino Den, Monster Rumble and RoboJam.
  • 🛡️ The patcher only accepts the three known Sony USBD.IRX builds, which all PS2 Buzz! games we have checked use. It refuses any other build and leaves the game untouched.
  • ⚠️ Untested on a real PS3 (CFW and HEN). Please report results in an issue.
  • 📜 The old game-specific EE patcher (Pad Bridge 0.2.0) stays in ps2/legacy/.

Instructions: ps2/README.md


🎮 PS3 games: phones and DualShocks as Buzz! buzzers (unchanged from v1.0.0)

  • 📱 Phones (http://<PS3-IP>:8420/) and 🕹️ DualShocks act as buzzers, up to 8 players.
  • ✅ Tested on CFW: Brain of the UK, Quiz TV, Quiz World. PS3HEN: signed for it, untested.

Instructions: ps3/README.md


💻 PCSX2 on PC: phones as Buzz! buzzers (unchanged)

pcsx2/README.md


📦 Download Assets

  • buzz-bridge-ps2.exe: universal PS2 ISO patcher for Windows.
  • BuzzBridge.pkg: PS3 app + plugin. Install it from the XMB (Package Manager → Install Package Files).
  • BuzzBridge-v1.1.0.zip: everything: the PS2 patcher (exe and Python source), the PS3 PKG and plugin files, and the PCSX2 phone server.

No game data is included. You need your own copies of the games.

v1.0.0 - Buzz! Bridge: phones and DualShocks for PS3 Buzz!, real buzzers for PS2 Buzz! on PS3

Choose a tag to compare

@Gabarsolon Gabarsolon released this 26 Oct 18:30

🚀 Buzz! Bridge v1.0.0

Play Buzz! quiz games on a PS3: phones and DualShocks as buzzers in PS3 Buzz! games, real Buzz! buzzers in PS2 Buzz! games on a PS3 slim/super slim, and phones as buzzers in PCSX2.


🎮 PS3 games: phones and DualShocks as Buzz! buzzers

  • 📱 Phones: open http://<PS3-IP>:8420/ on any phone on the same network and pick a player. The game's buzzer lights show on the phone.
  • 🕹️ DualShocks: R1/R2 = red, △ = blue, □ = orange, ○ = green, ✕ = yellow. Optional two players per pad.
  • 👥 Up to 8 players: two virtual Buzz! buzzer sets; the "no Buzz! buzzers detected" screen goes away.
  • 📲 No PC needed: start the Buzz! Bridge app, choose Start for this session, then start the game. The plugin loads by itself about 30 seconds after the main menu.
  • 🛡️ No game patching, no dev_flash writes: the plugin lives only in the running game.

✅ Tested on a PS3 (CECH-25xx, Evilnat 4.92 CFW + Cobra, webMAN MOD 1.47.48a): Buzz!: Brain of the UK (BCES00347), Buzz!: Quiz TV – Special Edition (BCES00303), Buzz!: Quiz World (BCES00644). Other versions are tried in a careful "generic" mode and refused if anything does not match (PORTING.md).

⚠️ Tested on CFW. PS3HEN should work but is untested: the plugin files are signed with key revision 0A like webMAN MOD; please report results. Reboot before playing another game. "Enable at boot" is included but not yet tested on a console.

Instructions: ps3/README.md


🕹️ PS2 games on a PS3 slim/super slim: real Buzz! buzzers (Buzz! Pad Bridge 0.2.0)

  • 🔧 Patches your own ISO so the game reads the buzzers from the controller ps2_netemu turns the Buzz! dongle into. Nothing on the PS3 is modified.
  • ✅ Buzz! The Schools Quiz: real wired buzzers on a PS3 (2 players) and PCSX2. Buzz! The Mega Quiz: PCSX2 (PS3 untested). Other versions are auto-detected and refused if anything does not match.
  • ⚠️ 2 players (handsets 1 and 2): ps2_netemu only passes 10 of the 20 buzzer buttons. Phones are not possible for PS2 games without extra hardware: ps2_netemu has no network support.

Instructions: ps2/README.md


💻 PCSX2 on PC: phones as Buzz! buzzers

  • 📱 Phones connect to a small PC server (LAN, or the internet through a Cloudflare quick tunnel); it drives a virtual gamepad that PCSX2's Buzz! device reads. No PCSX2 patching.
  • Formerly the separate buzz-web-controller repository, now in pcsx2/. Run from source with Python: pcsx2/README.md

📦 Download Assets

  • BuzzBridge.pkg: PS3 app + plugin, install from the XMB (Package Manager → Install Package Files).
  • buzz-pad-bridge.exe: PS2 ISO patcher for Windows (drag your ISO onto it).
  • BuzzBridge-v1.0.0.zip: everything: the PS3 PKG and plugin files with the porting tools, the PS2 patcher (exe, Python source, cheats) and the PCSX2 phone server.

No game data is included. You need your own copies of the games.

Buzz! Pad Bridge v0.2.0

Choose a tag to compare

@Gabarsolon Gabarsolon released this 25 Oct 19:38

🐝 Buzz! Pad Bridge v0.2.0

Play PS2 Buzz! games with your real Buzz! buzzers on a PS3 slim / super slim (ps2_netemu). Game patch only, nothing on the PS3 is modified.

✨ New

  • 🔍 Auto-detection: the patcher now finds the patch addresses in each game itself, with strict structure checks. It refuses anything ambiguous instead of guessing.
  • 🎮 Buzz! The Mega Quiz (Europe, En/Fr/Nl, SCES_545.05) is supported: works in PCSX2. Not yet tested on a PS3.
  • 🧾 Bundled PCSX2 cheat for Mega Quiz: cheats/175AAA90.pnach
  • ↩️ Versions that are not on the verified list get a recovery file next to the ISO (<iso>.buzz-pad-bridge.json) so --restore always works. Keep it with the ISO.

✅ Supported

Game Status
Buzz! The Schools Quiz (UK), SCES_549.41, Original v2.00 PS3 (real buzzers) + PCSX2
Buzz! The Mega Quiz (Europe), SCES_545.05 PCSX2
Other Buzz! games Tried automatically; patched only if every check passes (marked UNTESTED)

⚠️ Limits

  • 👥 2 players (handsets 1–2): ps2_netemu passes only 10 of the 20 buzzer buttons
  • 💡 Buzzer lights stay off
  • 🔌 Turn the DualShock 3 off once the game runs
  • ❓ HEN untested. HEN cannot run PS2 ISOs directly: patch the ISO first, then convert it to a PS2 Classic (.BIN.ENC / .pkg)

📦 Downloads

  • buzz-pad-bridge.exe: drag your ISO onto it
  • buzz-pad-bridge-v0.2.0.zip: exe + source, cheats, tools, tests and docs

No game data included. Tried it with another Buzz! game? Please open an issue with the result.

Buzz! Pad Bridge v0.1.0

Choose a tag to compare

@Gabarsolon Gabarsolon released this 25 Oct 16:37

🐝 Buzz! Pad Bridge v0.1.0

Play Buzz! The Schools Quiz (PS2) with your real Buzz! buzzers on a PS3 slim / super slim.

ps2_netemu turns the Buzz! USB dongle into a DualShock controller, so the game stops at "Buzz! buzzers are not detected". This patches your own ISO so the game reads the buzzers from that controller. Nothing on the PS3 is modified.

✅ What works

  • 🎮 Real wired buzzers on a PS3 (CECH-25xx, Evilnat 4.92 CFW, webMAN): 2 players (handsets 1 and 2)
  • 🖥️ PCSX2 with a normal controller (patched ISO or cheats/7C8E9A15.pnach)
  • ↩️ --restore undoes the patch, --check reports the state

⚠️ Limits

  • 👥 Only 2 players: ps2_netemu passes only 10 of the 20 buzzer buttons. 4-player plan in PLAN.md
  • 💡 Buzzer lights stay off
  • 🔌 Turn the DualShock 3 off once the game runs, or its buttons count as buzzer presses
  • ❓ PS3 HEN: untested, should work (game patch only)

💿 Supported version

Only Buzz! The Schools Quiz (UK), SCES-54941, Original v2.00 (Redump SHA-1 b3862f09cf0be9caa1ccf88dae5ab8de6691b31b). Other versions are refused untouched. Want another Buzz! game? See docs/PORTING.md.

📦 Downloads

  • buzz-pad-bridge.exe: drag your ISO onto it
  • buzz-pad-bridge-v0.1.0.zip: exe + Python source, cheat file, porting tool and docs

No game data included.