Repository navigation
v1.6.0-dev7 — single-SD timing targets the active AV head
Pre-releasePre-release. Supersedes v1.6.0-dev6. Full dev4 (HDMI custom resolutions) feature set.
Single-SD-family timing now targets the active AV head.
dev6's single-SD fallback chose which AV head to reprogram from the SD target (480i → head 0, 576i → head 1). GitHub issue #1 (NTSC console, 480i over component) shows that assumption is wrong: that console drives its live 480i output on head 1, with head 0 idle. dev6 cleared idle head 0 and left the live head at stock timing, so the candidate never activated and the test reverted with "The active analog timing did not match the candidate."
dev7 reads the head that is actually programmed (AV cache state==2) and reprograms that one. switch_revert does the same. The old target-derived default is kept only as a fallback when zero or both heads are active.
patch_active_head()— the programmed head, or -1.switch_begin_target/switch_revertuse it;patch_invalidate_headnow logs the no-op case too.- Host tests: 44/44, including an NTSC head-1-active case.
For NTSC / component (issue #1): AV Multi Out at 480i → launch → Test 240p. Expected: the 240p picture appears with a 15-second countdown. A failed activation reverts to stock cleanly (no reboot). If it still fails, pull /dev_hdd0/tmp/ps3_240p.log — it now logs Single-SD fallback: invalidate head=....
CRT-Toolset-1.6.0-dev7.pkg — SHA-256 5de272bcc5210ef8e4500eb89ef4d28af4c0d5a4757239bf150f85d5779b89b4