Skip to content

WorldEdit Integration

Ghost edited this page Nov 15, 2026 · 1 revision

🪄 WorldEdit Integration

WorldEdit for Fabric is required by Fabric Guard 1.7.10. It provides the selections used to create regions, and Fabric Guard includes protection hooks for WorldEdit operations.

Define a region using a cuboid selection

Choose two opposite corners with WorldEdit:

//wand
//pos1
//pos2
/rg define spawn

//pos1 and //pos2 should be executed while standing at different intended corners. Confirm the final selection includes the full build height.

Polygonal selection

Fabric Guard registers /rg definepoly <id> and a polygonal region data type. Prepare a suitable polygon selection in WorldEdit before using the command:

/rg definepoly festival

The exact WorldEdit selector command can differ between WorldEdit versions; refer to the documentation for the installed WorldEdit build.

Re-select an existing region

/rg select spawn

Or, while inside an existing region:

/rg select

A player is required for selection-based commands.

WorldEdit protection and bypass

The build registers a worldedit state flag and includes a WorldEdit protection extent/listener. It also defines the bypass permission:

worldguard.worldedit.bypass

The alternate fabricguard.worldedit.bypass prefix may be recognized through permission compatibility logic.

A region flag can be configured as:

/rg flag spawn worldedit deny

Be aware that WorldEdit, creative-mode building, and standard player interactions may travel through different protection paths. Test commands with the actual roles and installed WorldEdit version.

If selections do not work

  • Confirm WorldEdit is installed on the server and loaded without errors.
  • Make sure the selection is in the same dimension as the command sender.
  • Use a cuboid for /rg define and a supported polygon selection for /rg definepoly.
  • Verify WorldEdit permissions and read the Fabric Guard response in chat.

See Getting-Started and Troubleshooting.

Clone this wiki locally