Rad Pro: UI suggestions

[KevynTD]

First of all, congratulations, you did a great job, it's much better than the original software! I really liked it!

I'll give you a few suggestions, based on the short time I've used it on FNIRSi GC-03

• Display battery percentage: I missed having a numerical battery indicator, I would see great value in having an option to display the battery percentage next to the battery symbol, or replacing the symbol with the percentage.

• Battery life estimate: In the settings, have an option that shows/calculates a battery usage graph and estimates battery life (based on the angle of the last saved point and the current point on the graph). It wouldn't even be necessary to record everything, recording the last two hours on the graph, every 15 or 30 minutes for example, to make the estimate and show something on the usage graph (a total of 4 or 8 stored values ​​if it's not a large data load), or if it's not a big problem, store the total battery usage period (with some period limitation?).

• Pulse sound volume: In the pulse sound settings, have the option to set the pulse volume, even if it's in increments of 10%, in a quieter environment being able to set this helps, instead of always using 100% volume.

• Marquee on cutted texts: The text that is interrupted by "..." should scroll like a marquee (result on right), allowing us to read the complete text. I just don't know the hardware limitations if this would be possible.

And once again, congratulations on a job well done! ;)

[ge0rg]

The GC-03 has a portrait screen layout, which doesn't match well the UI design of RadPro. The design works much better on the landscape screens (like with the GC-01):

One option would be to split the title into a second line, in order to leave more space for the symbols without having to truncate the title (not in the photo, but "History" and "Average" are the only ones that fit the line).

But a more useful approach for the available vertical screen space would be to fit two secondary metrics, or have a screen showing live data from all three sensors (Geiger, electric, magnetic) in large font.

[peshka110]

Can you tell me what firmware version you have on your gc 01? I have 3.1.1, but the time isn't displayed.

[ge0rg]

It was 3.1test21, so I'm quite surprised if the clock display got removed after that. Unfortunately, I don't have the GC-01 any more in order to perform another test.

[Gissio]

@peshka110 : Did you set the time?

[peshka110]

I apologize, the watch didn't appear in the settings until I set the date and time. After setting it up, the watch appeared.