Skip to content

Releases

AnyAuto 0.9

Choose a tag to compare

@GitMag GitMag released this 13 Nov 10:47

AnyAuto 0.9

New: cars without a touch screen (#3). With a rotary knob (such as BMW's iDrive) or a touchpad, select Android Auto's pan button (✥, bottom right) and press it: a ring, AnyAuto's pointer, appears on the app.

  • Move: push the knob, or slide on the touchpad. Quick pushes the same way go further.
  • Click: press the knob. For the next click, press the pan button again.
  • Scroll: push past the top or bottom edge.
  • AnyAuto's bar: push the ring into the bar and it lands on a button; up and down go from button to button.
  • Back: the car's Back button goes back in the app, and Android Auto's buttons at the top right get Apps too.

After 10 seconds without the knob the ring goes away. The next press of the pan button then clicks nothing; press it again to get the ring back.

Fix: before, pushing the knob in pan mode dragged the app with a virtual finger, which could click things by accident.

If your car's knob or touchpad behaves differently, please open an issue.

Install: tap Update on AnyAuto's Home screen, or install AnyAuto-0.9.apk with UnknownAuto as before. See the README.

Free and open source (GPL-3.0). No accounts, no analytics.

AnyAuto 0.8

Choose a tag to compare

@GitMag GitMag released this 12 Nov 13:05

AnyAuto 0.8

New: a navigation bar on the car screen. Back, Apps, Keyboard, Close and Hide sit in a slim bar beside the app, with labels, instead of floating over it. Android Auto's own buttons are down to one at the top right, which shows or hides the bar. Hide gives the app the whole width, for video. On a right-hand-drive car, ⋮ → Navigation bar side puts the bar on the right.

New: Close. Closes the app on the car screen, like swiping it away in Recents. The next drive starts at the apps grid.

The phone's dark screen is explained. On phones where the car screen only runs while the phone is awake, AnyAuto keeps the phone awake with its screen off. That's on purpose, and now the Home screen says so before your first drive, and the car screen says it on the first three drives.

Fix: the phone's screen could stay on by mistake. 0.7's flicker guard could mistake a sleeping phone waking up (seen on a Pixel) for a phone that won't stay dark, and then kept its screen on. That no longer happens; phones that really fight the dark screen are still caught. If 0.7 turned on ⋮ → Keep the phone's screen on for you and your phone doesn't flicker, turn it off again.

Shizuku started with root on Android 13 or older can't make the car display (#1). AnyAuto now says so and tells you to start Shizuku with Wireless debugging instead.

Updates from the app. When you open AnyAuto, it looks for a new version on GitHub. When one is out, the Home screen offers it, and it installs through UnknownAuto so Android Auto keeps accepting AnyAuto. Nothing runs in the background. Turn it off with ⋮ → Check for updates automatically. This adds the internet permission; checking for updates is the only thing AnyAuto does online.

Install: update with UnknownAuto as before (AnyAuto-0.8.apk). See the README.

Free and open source (GPL-3.0). No accounts, no analytics.

AnyAuto 0.7

Choose a tag to compare

@GitMag GitMag released this 11 Nov 08:14

AnyAuto 0.7

Fix: the phone no longer flickers non-stop.

On phones where the car screen would sleep with the phone (Android 17, One UI 9), AnyAuto keeps the phone awake and turns off only its screen. Some phones turn their screen straight back on (or go to sleep) when that happens, and the two kept fighting. The screen flickered without end and the phone stopped responding until the car was turned off.

AnyAuto now notices this within a few seconds and stops turning the screen off, so it stays on and the phone keeps working. It also turns on ⋮ → Keep the phone's screen on for that phone, so later drives skip the dark screen altogether.

If you hit the flicker on 0.6 or earlier, turning on ⋮ → Keep the phone's screen on before driving avoids it too.

Install: update with UnknownAuto as before (AnyAuto-0.7.apk). See the README.

Free and open source (GPL-3.0). No internet permission, no accounts, no analytics.

AnyAuto 0.6

Choose a tag to compare

@GitMag GitMag released this 10 Nov 18:45

AnyAuto 0.6

Real full screen. With ⋮ → Full screen in the car (on by default), the app now fills the car screen edge to edge, the way Google Maps does. The black frame around it is gone. Android Auto rounds the corners a little. Apps, Keyboard and Back still float over the top corner and hide by themselves. The dashboard card is unchanged.

Use your phone while AnyAuto runs

  • Phones where the car screen runs on its own (Android 14, for example): AnyAuto now leaves the phone alone. Lock it, put it away or use it as usual, and the car screen keeps going.
  • Phones where the car screen would sleep with the phone (Android 17 on a Pixel, for example): the phone stays awake with its screen off, as before. AnyAuto checks which case your phone is.
  • New setting: ⋮ → Keep the phone's screen on keeps the phone's screen on while AnyAuto is on the car screen, so you can use the phone at the same time. Touching the phone closes a keyboard that's open on the car screen.

Install: update with UnknownAuto as before (AnyAuto-0.6.apk). See the README.

Free and open source (GPL-3.0). No internet permission, no accounts, no analytics.

AnyAuto 0.5

Choose a tag to compare

@GitMag GitMag released this 10 Nov 07:35

AnyAuto 0.5

Fix: apps no longer turn sideways or shrink on the car screen

On Android 14 and older, an app that only works in portrait (many games and messaging apps) turned AnyAuto's car display to portrait. The car screen then showed it shrunk into a narrow column, and taps landed in the wrong places. This was reported on 480p head units.

AnyAuto now keeps its display landscape, whatever the app asks for. Portrait-only apps show upright at full height in a column in the middle of the car screen, and taps land where you tap. The first time, Android may show a one-time hint about letterboxed apps; tap Got it.

Install: update with UnknownAuto as before (AnyAuto-0.5.apk). See the README.

Free and open source (GPL-3.0). No internet permission, no accounts, no analytics.

AnyAuto 0.4

Choose a tag to compare

@GitMag GitMag released this 09 Nov 20:34

AnyAuto 0.4

Typing in the car

  • The keyboard opens on the car screen. Tap a text field and type right there, instead of on the phone.
  • Keyboard button next to Apps and Back (and on the Try preview's rail): opens the keyboard for the selected text field, or closes it. It tells you when no text field is selected. Needs Android 11 or newer.
  • Setting: ⋮ → Keyboard → On the car screen (default) or On the phone. With On the phone, the phone's screen stays on while AnyAuto is on the car screen, so you can type on it.

Full screen

  • The app now uses the whole car screen. Apps, Keyboard and Back float over its top corner and hide by themselves, and Android Auto's own side bar stays. To keep the buttons out of the app's way, turn off ⋮ → Full screen in the car.

Install: update with UnknownAuto as before (AnyAuto-0.4.apk). See the README.

Free and open source (GPL-3.0). No internet permission, no accounts, no analytics.

AnyAuto 0.3

Choose a tag to compare

@GitMag GitMag released this 09 Nov 17:52

AnyAuto 0.3

The first release. AnyAuto shows ordinary phone apps on the Android Auto screen: a browser, a video app, Settings, or anything else with a launcher icon. It runs them on a car-sized virtual display, draws that display onto the car screen, and sends the car's taps, drags, flings and pinches back to the app as touches.

  • Choose apps on the phone, then pick one from AnyAuto's grid in the car. Apps and Back are at the top of the car screen.
  • Works in full screen and in the Android Auto dashboard card.
  • Try shows an app at car size on the phone, with the same display and gestures as the car.
  • While an app is on the car screen, the phone stays awake with its own screen off. When Android Auto stops showing AnyAuto, the phone goes back to how it was.

Install: you need Shizuku running, and UnknownAuto to install AnyAuto-0.3.apk so that Android Auto accepts it. See the README.

No internet permission, no accounts, no analytics.

License: GPL-3.0. This release is also licensed under the GNU General Public License, version 3, which replaced the earlier PolyForm Noncommercial license.