Repository navigation
06. Virtual Implementation
Nilesh002 edited this page Aug 9, 2022
·
28 revisions










| Name of the Algorithm: Security |
|---|
| Step 1: Start |
| Step 2: Read the card |
| Step 3: Check for card validation |
| Step 4: If the card is valid, then unlock the lid |
| Step 5: Place the item |
| Step 6: Lock the lid |
| Step 7: Stop |
| Name of the Algorithm: Indication |
|---|
| Step 1: Start |
| Step 2: Alert when the item is placed |
| Step 3: Alert when the lid is closed |
| Step 4: Alert when an obstacle is detected |
| Step 5: Alert when the item is delivered |
| Step 6: Stop |
| Name of the Algorithm: Detection |
|---|
| Step 1: Start |
| Step 2: Detect when the item is placed |
| Step 3: Detect the card |
| Step 4: Detect when an obstacle is present |
| Step 5: Detect when the lid is opened |
| Step 6: Detect when the lid is closed |
| Step 7: Detect when the item is delivered |
| Name of the Algorithm: Motion/Mobility |
|---|
| Step 1: Start |
| Step 2: Read inputs provided by the user |
| Step 3: Start moving as per inputs provided by the user |
| Step 4: Check for obstacles |
| Step 5: Stop at the destination |
| Step 6: Stop |
| Name of the Algorithm: Collecting unit |
|---|
| Step 1: Start |
| Step 2: Read inputs from user |
| Step 3: Unlock the lid |
| Step 4: Open the lid |
| Step 5: Place the item |
| Step 6: Close the lid |
| Step 6: Lock the lid |
| Step 7: Start moving as per user inputs |
| Step 8: Stop at the delivery location |
| Step 9: Unlock the lid |
| Step 10: Open the lid |
| Step 11: Remove the item |
| Step 12: Close the lid |
| Step 13: Lock the lid |
| Step 14: Stop |






| SI No. | Material name | Description of material | Quantity required |
|---|---|---|---|
| 01. | Microcontroller | Arduino Mega 2560 | 1 |
| 02. | Ultrasoic Sensor | HC-SR04 | 1 |
| 03. | Servo motor | SG 90 | 1 |
| 04. | RFID Scanner | MFRC-522 RC522 | 1 |
| 05. | DC motor | 4 | |
| 06. | IR sensor | 2 | |
| 07. | Bluetooth module | HC-05 | 1 |
| 08. | Motor driver | L293D | 1 |
| 09. | Led | 1.5V-3V | 10 |
| 10. | Jumper wires | Male to female ,male to male ,female to female | 20 each |
| 11. | Metal sheet chassis | 27cm x17cm | 1 |
| 12. | Motor clamps | 4 | |
| 13. | Nuts and bolts | 20 | |
| 14. | LCD display | 5V , 16x2 | 1 |
| 15. | Wheels | D=8cm ,T=3-4cm | 4 |
| 16. | Battery | ||
| 17. | Hinges | 2 | |
| 18. | Breadboard | 1 |