BambuBridge 1.1.2

• X1, H2 and P2S cameras: Bridge now uses the exact LiveView address each printer reports, and picks the camera type by printer model. This fixes "The camera may be busy" on H2-series printers like the H2C with LAN Only Liveview on.
• If LiveView is turned off on the printer, Bridge now says so right away and tells you which setting to turn on (LAN Only Liveview, or LAN Mode Liveview on the X1). Bambu Cloud keeps working.
• Adds X2-series printers to the RTSP camera list.

Downloads: https://bambufarm.app/#bridge

BambuBridge 1.1.1

• Windows and Linux: the window buttons (minimize, maximize, close) no longer cover the connection status at the top right.
• Linux: the AppImage now opens on a fresh Ubuntu 22.04 or 24.04 with nothing else to install (it no longer needs libfuse2).
• macOS 12 Monterey: there's now a separate download for Monterey (Intel and Apple silicon). The main Mac app needs macOS 13 or later.
• Camera fixes:
  • A printer that's off or unreachable now shows a clear error within 10 seconds instead of staying on "connecting".
  • One printer being offline no longer interrupts the other cameras.
  • Two printers can't end up on the same IP address after the router reassigns addresses.

Downloads: https://bambufarm.app/#bridge

BambuBridge 1.1.0

BambuBridge 1.1 is a new app built from scratch.

• A real app. Sign in with email codes and a short setup, then see every printer with a live preview. It keeps running in the menu bar or system tray and can start at login.
• Finds printers on its own. It listens for printers announcing themselves on the network and follows them when their IP address changes.
• More reliable cameras. It recovers from Wi-Fi drops, sleep and printer reboots, and errors tell you what to do next. A printer that's off doesn't interrupt the others.
• Streams only while someone is watching in BambuFarm, so it uses less bandwidth and leaves Bambu Handy free.
• New: ESP32 (beta). P1 and A1 cameras without a computer.

Installation steps are in the README.