Skip to content

Releases

CS2 Account Manager 0.2.1

Choose a tag to compare

@HazarDos1 HazarDos1 released this 09 Nov 19:24

Launch in Steam actually signs you in

The button opened Steam on the sign-in screen: you still had to pick the
account and type the Steam Guard code. Three separate causes, each found on a
real install rather than guessed.

loginusers.vdf has two fields and only one was written. MostRecent only
preselects an account in the list; AutoLogin is the one that decides whether
Steam signs in by itself. The account being launched had MostRecent=1 and
AutoLogin=0, while a stale account kept AutoLogin=1 — and AutoLoginUser in
the registry does not override it. The vdf wins.

Steam's account chooser overrode the vdf in turn. While
AlwaysShowUserChooser is 1 in config.vdf (the Choose the account to use
each time Steam launches
toggle on the "Who's playing?" screen), Steam forces
the picker and rewrites loginusers.vdf behind you, putting AutoLogin
back to 0. Setting AutoLogin without clearing that toggle achieved nothing.
The app now clears it while Steam is shut down — and since config.vdf also
holds Steam's session tokens, it is never re-serialised: one value is replaced
and the remaining bytes are written back untouched.

The app reported success without knowing. RememberPassword=1 records only
the intent to keep a session, never that a usable token still exists. Launch
now checks ActiveUser under HKCU\Software\Valve\Steam\ActiveProcess — 0
while the sign-in screen is up — and falls back to the password on its own if
Steam stayed there. A second, independent signal backs it up: Steam bumps the
account's timestamp on every successful sign-in.

Measured end to end on a real install: chooser 1 → 0, AutoLogin 0 → 1,
ActiveUser 0 → 746724513 (the expected account), signed in, in 4 seconds.

The Steam Guard code, when it is still needed

Steam accepts no 2FA code on the command line; there is no official option. So
the code is always copied to the clipboard and, if Type the Steam Guard code
into the Steam window
is on, typed in for you.

That only matters the first time an account signs in on the machine. After
that Steam keeps the session and asks for nothing.

It types only when the foreground window belongs to steamwebhelper, verified
immediately before the keystrokes — without that guard a badly timed window
switch would type the code into a chat. The guard fired for real during
testing: it refused to type into Firefox.

The whole interface is translated

Every modal now goes through i18n: adding an account, editing, SDA
import/export, vault backup, mobile confirmations and the full authenticator
flow. 313 keys, none dormant.

Fixing them turned up labels that never switched language at all — in both
directions. "Last played", "Premier Rating", "Prime", "VAC", "Steam Guard" and
"Rank" stayed English forever; the unknown-penalty fallback printed Raison
inconnue
in the English UI. Their keys had existed all along, unused.

The renderer also stopped reading the engine's prose. It decided whether to
offer the "open Steam phone page" button by matching a French sentence in an
error message from another process. A kind now travels alongside the message,
so translating the engine later cannot silently break the UI.

Smaller fixes

  • The scan banner stayed on screen forever after a scan finished. The engine
    emits result before the queue update that releases the account, and the
    queue handler never redrew the detail panel.
  • Searching found nothing inside a collapsed group: the group's counter went up
    while the row stayed hidden. A search now expands everything, and the
    collapsed state comes back intact when the search is cleared.
  • List sorting was pinned to French collation regardless of the interface
    language.

Install

Download CS2-Account-Manager-Setup-0.2.1.exe and run it. Nothing else to
install, and your vault is kept on upgrade. The executable is not code-signed,
so SmartScreen will warn on first run: More info → Run anyway.

CS2-Account-Manager-0.2.1-win-x64.zip is the same build as a portable folder.

This release changes one Steam setting on your machine: it turns off the
account chooser. That is what makes the one-click sign-in possible. You can
turn it back on from Steam at any time.


« Lancer dans Steam » connecte vraiment

Le bouton ouvrait Steam sur l'écran de connexion : il fallait encore cliquer le
compte et taper le code Steam Guard. Trois causes distinctes, trouvées sur une
installation réelle plutôt que devinées.

loginusers.vdf a deux champs et un seul était écrit. MostRecent ne fait
que présélectionner le compte dans la liste ; c'est AutoLogin qui décide si
Steam se connecte tout seul. Le compte lancé avait MostRecent=1 et
AutoLogin=0, tandis qu'un compte périmé gardait AutoLogin=1 — et
AutoLoginUser dans le registre n'y change rien. C'est le vdf qui tranche.

Le sélecteur de comptes de Steam primait à son tour sur le vdf. Tant que
AlwaysShowUserChooser vaut 1 dans config.vdf (la bascule Choisir le
compte à utiliser à chaque lancement de Steam
, sur l'écran « Qui joue ? »),
Steam impose le sélecteur et réécrit loginusers.vdf derrière toi en
remettant AutoLogin à 0. Poser AutoLogin sans désactiver cette bascule ne
servait donc à rien. L'app la désactive maintenant pendant que Steam est fermé —
et comme config.vdf porte aussi les jetons de session de Steam, il n'est
jamais ré-sérialisé : une seule valeur est remplacée, le reste des octets est
réécrit tel quel.

L'app annonçait un succès sans rien en savoir. RememberPassword=1
n'indique que l'intention de mémoriser la session, jamais qu'un jeton
utilisable existe encore. Le lancement vérifie désormais ActiveUser sous
HKCU\Software\Valve\Steam\ActiveProcess — il vaut 0 tant que l'écran de
connexion est affiché — et reprend tout seul avec le mot de passe si Steam y est
resté. Un second signal indépendant le double : Steam avance le timestamp du
compte à chaque connexion réussie.

Mesuré de bout en bout sur une installation réelle : sélecteur 1 → 0,
AutoLogin 0 → 1, ActiveUser 0 → 746724513 (le compte attendu), connecté,
en 4 secondes.

Le code Steam Guard, quand il reste nécessaire

Steam n'accepte aucun code 2FA en ligne de commande ; il n'existe pas d'option
officielle. Le code est donc toujours copié dans le presse-papier et, si Taper
le code Steam Guard dans la fenêtre Steam
est activé, tapé à ta place.

Ça ne concerne que le premier login d'un compte sur la machine. Ensuite
Steam garde la session et ne demande plus rien.

La frappe n'a lieu que si la fenêtre au premier plan appartient à
steamwebhelper, vérifié juste avant — sans ce garde-fou, un changement de
fenêtre mal tombé taperait le code dans une conversation. Il s'est déclenché
pour de vrai pendant les tests : il a refusé de taper dans Firefox.

Toute l'interface est traduite

Toutes les modales passent par i18n : ajout d'un compte, modification,
import/export SDA, sauvegarde du coffre, confirmations mobiles et le déroulé
complet de l'authenticator. 313 clés, aucune dormante.

En les corrigeant, j'ai trouvé des libellés qui ne changeaient jamais de langue,
dans les deux sens. « Last played », « Premier Rating », « Prime », « VAC »,
« Steam Guard » et « Rank » restaient en anglais pour toujours ; le repli des
sanctions inconnues affichait « Raison inconnue » dans l'interface anglaise.
Leurs clés existaient depuis le début, inutilisées.

Le renderer a aussi cessé de lire la prose du moteur. Il décidait d'afficher le
bouton « page téléphone Steam » en testant une phrase française dans un message
d'erreur venu d'un autre processus. Un kind voyage maintenant à côté du
message, pour qu'une future traduction du moteur ne casse pas l'interface en
silence.

Correctifs plus petits

  • Le bandeau de scan restait affiché indéfiniment une fois le scan fini. Le
    moteur émet result avant le queue qui libère le compte, et le gestionnaire
    de queue ne redessinait jamais le panneau de détail.
  • La recherche ne trouvait rien dans un groupe replié : le compteur du groupe
    montait pendant que la ligne restait cachée. Une recherche déplie maintenant
    tout, et les replis reviennent intacts dès qu'on la vide.
  • Le tri de la liste était verrouillé sur les règles françaises quelle que soit
    la langue de l'interface.

Installer

Télécharge CS2-Account-Manager-Setup-0.2.1.exe et lance-le. Rien d'autre à
installer, et ton coffre est conservé à la mise à jour. L'exécutable n'est pas
signé, donc SmartScreen préviendra au premier lancement : Informations
complémentaires
→ Exécuter quand même.

CS2-Account-Manager-0.2.1-win-x64.zip est le même build en dossier portable.

Cette version modifie un réglage de Steam sur ta machine : elle désactive le
sélecteur de comptes. C'est ce qui rend la connexion en un clic possible. Tu
peux le réactiver depuis Steam quand tu veux.


Checksums (SHA-256)

082c4d5d4d807b97e4e7ab07afd9be7324cdc665e5a4f49db256990a7454000c  CS2-Account-Manager-Setup-0.2.1.exe
2eb96b3aaf8fdbe064252f0477da758c1fd4a4d598bff58a92f24b1d77e19ef8  CS2-Account-Manager-0.2.1-win-x64.zip

Verify with certutil -hashfile <file> SHA256 on Windows, or sha256sum <file> elsewhere.

CS2 Account Manager 0.2.0

Choose a tag to compare

@HazarDos1 HazarDos1 released this 09 Nov 17:39

English interface, French on a switch

The UI now starts in English. The globe button at the bottom of the left rail
switches to French, and the choice is remembered between runs.

The two dictionaries live in src/renderer/i18n.js — 285 keys each, with English
as the reference. A key missing from French falls back to the English string
instead of showing a blank, and an unknown key renders as its own name, so a gap
is visible rather than silent.

Messages written by the engine (the main process) are still French only.

Frame titles stay inside their frames

Accounts, Information, Actions and Notes moved from <legend> to a plain
<div>. The <legend> element was letting them spill outside the frame border,
and fixing that with a float collapsed the Options panel instead.

"26/10" is not a progression

An account past the 10 placement matches now reads Rank expired rather than
26/10. Below 10, the real progress is still shown. That is the game's own
wording — CS2 says "CS Rating expired" on the same account.

Unknown penalty reasons also stopped printing their code twice.


Install

Download CS2-Account-Manager-Setup-0.2.0.exe and run it. Nothing else to
install: Node.js, Electron and the Steam libraries are already inside. It
installs per-user, so no administrator rights are needed, and your vault is kept
on upgrade.

The executable is not code-signed, so Windows SmartScreen will warn on first
run: More info → Run anyway.

CS2-Account-Manager-0.2.0-win-x64.zip is the same build as a portable folder —
unzip it and run CS2 Account Manager.exe, no installation.


Interface en anglais, francais en bascule

L'interface demarre desormais en anglais. Le bouton globe en bas du rail de
gauche bascule en francais, et le choix est retenu d'un lancement a l'autre.

Les deux dictionnaires sont dans src/renderer/i18n.js — 285 cles chacun,
l'anglais servant de reference. Une cle absente du francais retombe sur la
chaine anglaise plutot que d'afficher un vide, et une cle inconnue s'affiche
sous son propre nom : le trou se voit au lieu de passer inapercu.

Les messages ecrits par le moteur (processus principal) restent en francais.

Les titres de cadre restent dans leur cadre

Accounts, Information, Actions et Notes passent de <legend> a un simple
<div>. Le <legend> les faisait deborder hors de la bordure, et le corriger
par un float cassait la mise en page du panneau Options.

« 26/10 » n'est pas une progression

Un compte au-dela des 10 parties de placement affiche maintenant Classement
expire
plutot que 26/10. En dessous de 10, la progression reelle reste
affichee. C'est le mot du jeu lui-meme : CS2 ecrit « Note CS expiree » sur ce
meme compte.

Les motifs de sanction inconnus n'affichent plus leur code en double.

CS2 Account Manager 0.1.0

Choose a tag to compare

@HazarDos1 HazarDos1 released this 09 Nov 15:17

Premiere version publique.

Installation : telecharge le zip, extrais-le, lance
CS2-Account-Manager-Setup-0.1.0.exe.

L'installateur contient tout : ni Node.js ni Electron ne sont requis.
Installation par utilisateur, sans droits administrateur.

L'executable n'est pas signe, donc Windows SmartScreen affichera un
avertissement au premier lancement : Informations complementaires ->
Executer quand meme.

Ce que fait l'application

  • etat Prime, cooldown competitif, ban VAC, rang Premier et niveau de profil,
    lus aupres du Game Coordinator de CS2
  • coffre chiffre AES-256-GCM, cle derivee par scrypt (N=2^17)
  • creation et retrait d'authenticator Steam, generation des codes Steam Guard
  • import et export SDA
  • sauvegarde du coffre (copie du blob chiffre, sans dechiffrement)

Donnees

Le coffre vit dans %APPDATA%\cs2-account-manager\, hors du dossier
d'installation : desinstaller ne l'efface pas.

Ecussons de rang

Les ecussons livres dans l'executable ont ete extraits d'une installation CS2.
Depuis les sources, npm run ranks les regenere depuis la tienne.