Repository navigation
freemapper-print v0.9.0
Added
- The manual now has figures, at the same places in both languages: sheets with title block, logo and passe-partout, a course sheet with its description box, masks for window and corridor orienteering, and the editor in the browser. They are made from the maps of Remo Madella (MOO Challenge Berlin 2025), who confirmed that they may serve as example maps in the public project. The courses on the course sheets come from freemapper-courseplan 0.14.1, and the window figure shows the default windows with their gap. Source and method are in
docs/manual/img/README.md(decision 0062). - The README in both languages shows these figures as its examples, each picture linked to its manual chapter, and a sheet at the top that links to the examples. The "Status" section starts with the current version and its date, and the section on the suite names the pinned freemapper-core version.
- A test (
tests/examples.rs) loads every example project and checks that its map, course file and logos exist and that eachATTRIBUTION.txtnames the map author.
Changed
- The core pin moves to freemapper-core v0.24.0. A PDF leaves out what the map frame cannot show (core decision 0031), so the PDF of a cropped sheet is smaller: 15 to 42 percent on the Gleisdreieck examples, whose map is much larger than the frame, and by 1 percent or less where the map nearly fits. The output stays pixel for pixel the same at 150 dpi, only the bytes differ. Since v0.24.0 a PDF also writes its paths compactly: coordinates rounded to 3 decimals, small shapes relative to their first point (core decision 0032; Bézier fitting was measured and dropped, it saved 8 percent more at five times the pixel differences). The example sheets shrink by about 80 percent, from 25.8 to 5.4 MB, and the tests' reference PDFs and the example PDFs were written again, the former because the tests compare them byte for byte.
- The example projects in
examples/are new, seven of them on the maps "Gleisdreieck" and "Rummelsburger Bucht" by Remo Madella (MOO Challenge Berlin 2025): scales, layouts, competition courses (also as IOF XML), a club training with two courses, window and corridor orienteering, and a recorded MCP session. Each has its own copy of the map, the courses from freemapper-courseplan 0.14.1, the PDFs and a preview. The earlier examples on Lübeck and Berlin maps are test fixtures now, intests/fixtures/examples/. The manual links to the new examples and quotes their output (decision 0064). - Windows from
masks windowno longer overlap (decision 0063). At least 3 mm on paper stay free between two windows, set with--gap(MCP:gap, a field of its own in the editor). Where two controls are too close for that, both windows shrink in proportion to their radius, and the command names them. No window gets smaller than 5 mm; if the gap would need that, the command writes nothing and says what to leave out. Masks written by hand in the project file stay as they are. - A release needs one approval instead of two (decision 0061): only the job that signs uses the
releaseenvironment. Every release is built with the updater and signed; without the signing secret it fails before anything is published.
Download the archive for your system, unpack it and start freemapper-print
(Windows: freemapper-print.exe) from a terminal or register it with your AI assistant.
Installation and first steps: see README.md (Deutsch) / README.en.md (English) in the
archive or https://github.com/HenryJobst/freemapper-print#readme
- Windows: freemapper-print-v0.9.0-windows-x86_64.zip
- macOS Apple Silicon (M1 and newer): freemapper-print-v0.9.0-macos-arm64.tar.gz
- macOS Intel: freemapper-print-v0.9.0-macos-x86_64.tar.gz
- Linux: freemapper-print-v0.9.0-linux-x86_64.tar.gz (ARM: linux-arm64)
The .gz files and freemapper-print-update.json with its signature are for freemapper-print update.
Full Changelog: v0.8.0...v0.9.0