v1.4.0

1.4.0 (2026-08-17)

• assets: add new icon set (d720f3c) - @lthiagovs
• assets: safe image-cache eviction wired into the heap policy [item 32] (3bed36d) - @anarchyysm
• audio: continuous TX stream API for WAV playback (0865b11) - @lthiagovs
• audio: persist volume in sound settings and record mic to WAV (bc990be) - @lthiagovs
• badusb: deliver real ducky payloads over native USB (9f627c2) - @lthiagovs
• battery: surface real charger state via a battery_service (f044e0d) - @lthiagovs
• ble: add sniffer observer hook and radio guards to backend (93be30b) - @lthiagovs
• ble: arbitrate nimble between bt apps and gatt profiles (6cbdb9f) - @lthiagovs
• ble: wire bluetooth screens to real radio backend (f0cc63e) - @lthiagovs
• bluetooth: expose cached BLE running state for cheap UI reads (5a4270e) - @lthiagovs
• bridge: background link monitor to re-detect a late or rebooted C5 (9137b30) - @anarchyysm
• bridge: background link monitor to re-detect a late or rebooted C5 (bc4e8a3) - @anarchyysm
• bridge: re-enable the P4<->C5 SPI bridge (bb3a7f3) - @anarchyysm
• bridge: run P4<->C5 bridge in POLL mode on the V2 PCB (no IRQ trace) (ca681e4) - @anarchyysm
• bridge: run P4<->C5 bridge in POLL mode on the V2 PCB (no IRQ trace) (1046db6) - @anarchyysm
• buttons: inject simulated presses for headless UI navigation (ed16866) - @lthiagovs
• c5-flasher: push C5 firmware over UART via OTA (30a254d) - @anarchyysm
• c5-flasher: ROM recovery flash and esptool passthrough (61fb673) - @anarchyysm
• c5-ota: UART firmware receiver via esp_ota (78a35b2) - @anarchyysm
• c5: BLE companion GATT relay and C5 log forwarding (7e4cb68) - @anarchyysm
• c5: capture coredumps to a dedicated flash partition (9c674c8) - @anarchyysm
• c5: centralize task priorities in sys_prio.h (af19cf1) - @anarchyysm
• c5: enable the 8MB in-package PSRAM (337c48b) - @anarchyysm
• c5: enable WiFi modem sleep (esp_wifi_set_ps MIN_MODEM) (d590d51) - @anarchyysm
• c5: InkTest-protocol SPI recovery client (ping/info/enter-download) (7f4d33a) - @anarchyysm
• c5: observe-only sys_monitor and task-WDT panic (3df7e65) - @anarchyysm
• c5: OTA partition table and USB-JTAG console (b42805e) - @anarchyysm
• c5: OTA rollback validated by P4 bridge health [C5-5] (e76cd36) - @anarchyysm
• c5: remove serial console / command REPL (5f21567) - @anarchyysm
• config: add wifi radio enable flag, default radios off (b5a8aa1) - @lthiagovs
• console: add badusb and hostlink commands (1efe06b) - @anarchyysm
• console: add battery status command (d7d70aa) - @anarchyysm
• console: add firstboot/capprep onboarding reset commands (9251151) - @lthiagovs
• console: add i2cscan command for bus diagnostics (9ccd1b9) - @anarchyysm
• console: add stack budget report command (8f08e79) - @lthiagovs
• console: c5 firmware-update command (01c18cb) - @anarchyysm
• console: c5 ota spi/uart + ping/info/sync, drop legacy bridge (76ef375) - @anarchyysm
• console: screen capture and headless nav commands (4ea38a1) - @lthiagovs
• core: add graceful shutdown handler that unmounts storage on restart (4af33ca) - @lthiagovs
• core: apply saved wifi/ble radio state at boot (0ea0a21) - @lthiagovs
• core: init battery service and audio i2s at boot (445446c) - @lthiagovs
• core: validate SD health at boot, remount if it fails (660faab) - @lthiagovs
• diag: add coredump crash capture and boot map with safe-mode viewers (31a9f25) - @anarchyysm
• diag: boot-loop detection via RTC counter, degraded mode after 3 abnormal boots (63099bc) - @anarchyysm
• display: render at XRGB8888 and dither to RGB565 to remove gradient banding (c02d1bc) - @anarchyysm
• display: wire screen auto-dim, timeout and brightness persistence (c95ca38) - @anarchyysm
• drivers: add audio, mic, and haptic GPIO pin definitions (b5e2c99) - @lthiagovs
• drivers: add bq25896 extended telemetry and control layer (d74e412) - @lthiagovs
• drivers: add DRV2605L haptic driver (aca9f01) - @lthiagovs
• drivers: add I2S audio driver for MAX98357 amp and PDM mic (b07537d) - @lthiagovs
• drivers: add input_manager; buttons_gpio becomes a shim over it (3c49ecb) - @anarchyysm
• drivers: add QMI8658A IMU driver (8ec2db8) - @lthiagovs
• dropdown: real wifi/ble toggles with config persistence (0ffc4a5) - @lthiagovs
• header: route SD remount requests through the card-detect worker (f68e24b) - @lthiagovs
• header: show wifi/ble by enabled state, color by real link (9a25252) - @lthiagovs
• hle: add Phase 1 build system, shims, and Phase 2 SPI bridge channel (f1237e8) - @racerxdl
• hle: add Phase 2 SPI bridge integration (620f0b9) - @racerxdl
• hle: add Phase 3 P4 core, LVGL, display shims (bd5bb07) - @racerxdl
• hle: add Phase 4 interactive mode with SDL2 + LVGL (71f7d8a) - @racerxdl
• hle: add Phase 5 CC1101 emulator, E2E bridge tests (7ad93d8) - @racerxdl
• hle: add VFS/storage stub, esp_vfs_fat, fix LVGL integration (d6bc086) - @racerxdl
• hle: compile real firmware UI, use styled boot and home screens (6a5ae39) - @racerxdl
• hle: full firmware compiles and boots — real kernel_init → ui_init (4f0208e) - @racerxdl
• hle: harden native simulator workflow (ad1a357) - @racerxdl
• hle: HLE kernel boot sequence with boot screen and home menu (93343c4) - @racerxdl
• hle: real firmware kernel_init() boots completely (1c2497a) - @racerxdl
• hle: wire SPI bridge PHY to in-memory channel with protocol fixes (8bbb50b) - @racerxdl
• home: redesign home with date, art and pinned favorites (0df4824) - @lthiagovs
• host-link: companion protocol over USB CDC and BLE on the P4 (03d4a9d) - @anarchyysm
• i2c: recover a stuck bus at init and return esp_err_t [item 35] (fb97083) - @anarchyysm
• ir: add ir flash on/off full-power torch command (1f4e668) - @anarchyysm
• ir: add rx/tx deinit and ir console commands (a203ebb) - @anarchyysm
• ir: air-conditioner protocol framework (d01a9fb) - @lthiagovs
• ir: decode Coolix AC frames (1e5ff78) - @lthiagovs
• ir: decode Gree AC frames (b412bed) - @lthiagovs
• ir: decode NEC extended 16-bit command (ea9b648) - @lthiagovs
• ir: decode received AC frames into ir_ac_state_t (741476e) - @lthiagovs
• ir: enable DMA RX and 512-symbol buffers for large frames (c6a132d) - @lthiagovs
• ir: Kaseikyo multi-vendor support (500fb63) - @lthiagovs
• ir: new protocol Coolix AC (7d83a95) - @lthiagovs
• ir: new protocol Gree AC (a844fbb) - @lthiagovs
• ir: new protocol Haier AC (0a927d8) - @lthiagovs
• ir: new protocol LG AC (0ec2ee2) - @lthiagovs
• ir: new protocol Midea AC (d790526) - @lthiagovs
• ir: new protocol NEC42 (3f14ca6) - @lthiagovs
• ir: new protocol Pioneer (dba60c0) - @lthiagovs
• ir: new protocol RCA (7dfa9a8) - @lthiagovs
• ir: new protocol Toshiba AC (93da1f5) - @lthiagovs
• ir: per-protocol match tolerance (321cb89) - @lthiagovs
• ir: recognize received AC frames in the learn screen (b45b786) - @lthiagovs
• ir: save unrecognized captures as raw in the learn screen (1636125) - @lthiagovs
• ir: widen ir_data_t address/command to 32bit (1462d25) - @lthiagovs
• ir: wire the infrared screens to the real IR library (f7016c4) - @lthiagovs
• kernel: enable ST7789 display and LVGL UI via lvgl_glue (ece401b) - @anarchyysm
• kernel: re-enable ST7789 display and LVGL UI (9f95cea) - @anarchyysm
• led: add LED config (brightness + info/warning/error colors) with default file and signal helpers (783b9ef) - @anarchyysm
• led: add visual signals to wifi scan/connect, C5 ping/info/sync (info=ok, warning=empty, error=fail) (5c9010e) - @anarchyysm
• led: blink info on SPI session start/stop (ESP_LOGI) in companion (e61db12) - @anarchyysm
• led: blink on SPI bridge failures (error/warning next to each ESP_LOGE/ESP_LOGW) (28deb41) - @anarchyysm
• led: blink on SPI session failures (companion) next to each ESP_LOGE/ESP_LOGW (861dcff) - @anarchyysm
• led: implement LP5816 I2C RGB driver and wire it to the LED control screen (a7b97f9) - @anarchyysm
• led: move led signals to Service and wire info/warning/error into boot, battery and C5 link events (3fd5fce) - @anarchyysm
• led: rework LED screen into a signal config editor (per-signal color + global intensity, saves to led.conf) (628c2a3) - @anarchyysm
• led: signal at service/operation level for IR, BadUSB, SubGHz, NFC and wifi client/target scans (covers console + UI) (585f5b7) - @anarchyysm
• led: signal wifi attack/monitor tools (sniffer, deauther, evil twin, beacon spam, probe/deauth/signal monitor) and port scan (751973b) - @anarchyysm
• led: use pure magenta for purple (#FF00FF) in preset and info default (b4697e0) - @anarchyysm
• lora/meshcore: wire end-to-end stack with libsodium crypto (b78278a) - @lthiagovs
• lora: add traceroute request and result capture (5c8dd38) - @lthiagovs
• lora: add unified mesh session manager (4e24ea6) - @lthiagovs
• lora: rewire mesh UI screens onto session manager (30d6e6f) - @lthiagovs
• lvgl: screen sharing over USB (snapshot stream + remote keypad, auto-stop on disconnect) (5832223) - @anarchyysm
• lvgl: tee rendered strips to a callback for screenshot capture (865c3a5) - @lthiagovs
• nfc: add NFC simulation model and shared UI kit (efdf6cc) - @lthiagovs
• ota: flash the C5 over the SPI bridge, SPI or UART transport (5b0d377) - @anarchyysm
• pins: remap pin_def to the new schematic (81c877b) - @lthiagovs
• power: add an idle rest screen and low-battery toast (93ee374) - @lthiagovs
• power: add power_manager with esp_pm DFS + light sleep gated by screen-off (d607658) - @anarchyysm
• power: enable light sleep with pinned frequency (no DFS) (bb3d1dd) - @anarchyysm
• power: feed USB state into power_manager (VBUS + TinyUSB mount/suspend hold NO_LIGHT_SLEEP) [item 41] (22662ce) - @anarchyysm
• power: hold OK+LEFT for 3s to power off (ship mode); combo avoids /QON+CHIP_PU reset path (0184686) - @anarchyysm
• power: light sleep without DFS (pinned freq) + USB/console kept alive (lock + UART wake) (cac37f9) - @anarchyysm
• power: P4 signals device power state to C5 over bridge; C5 drops radio when asleep (8586f98) - @anarchyysm
• power: real BQ25896 ship mode/charge control, filtered SoC, low-battery policy (62159d8) - @anarchyysm
• psram: re-enable PSRAM on P4 and restore full-frame rendering (110deb0) - @anarchyysm
• recovery: add boot-combo safe mode with factory reset (config/all) (1adf9e7) - @anarchyysm
• sd: interrupt-driven card hotplug with debounce, drop the 2Hz CD poll (fed472a) - @anarchyysm
• service: add lvgl_glue over esp_lvgl_port and rework lvgl_port disp/indev (c9e207c) - @lthiagovs
• spi_bridge: add CRC-16 frame integrity to the P4/C5 protocol [SPI-1] (c91f956) - @anarchyysm
• spi_bridge: version the wire protocol and check C5 match at boot [SPI-2] (4e65984) - @anarchyysm
• spi-bridge: selectable IRQ/POLL handshake mode at init (0c9453d) - @anarchyysm
• spi-bridge: SYSTEM enter-download op for C5 ROM recovery (37afd3c) - @anarchyysm
• spi: add host-link relay category and file/state/log ops (706c004) - @anarchyysm
• spi: run all scans async via a shared C5 runner so they never block the bridge (ece32eb) - @anarchyysm
• spi: split command id into category + op bytes (3103706) - @anarchyysm
• storage: atomic config writes with crash recovery (4753c4d) - @lthiagovs
• sys_monitor: heap policy with thresholds + failed-alloc callback [item 15] (60ea83d) - @anarchyysm
• sys_monitor: periodic SD health check, remount on failure (413b850) - @lthiagovs
• time: add sys_time service with build-date baseline (0ccd380) - @lthiagovs
• time: show clock in header and add date console command (96190d2) - @lthiagovs
• ui: AC control panel and polished keypad in controller (739dc3d) - @lthiagovs
• ui: add animated subghz oscilloscope scope component (9f06b00) - @lthiagovs
• ui: add audio screens (011b076) - @lthiagovs
• ui: add beacon spam screen (1ebdfb4) - @lthiagovs
• ui: add brute-force, send, and radio-config screens (62daef9) - @lthiagovs
• ui: add C5 status screen (1b1f3ee) - @lthiagovs
• ui: add capture_result panel for capture protocols (e719058) - @lthiagovs
• ui: add card emulate screen (f1452d0) - @lthiagovs
• ui: add channel-occupancy analysis screen (6ccbe82) - @lthiagovs
• ui: add client scan screen and drop legacy stations scan (f3265c5) - @lthiagovs
• ui: add companion app screen to the Bluetooth menu (357761a) - @anarchyysm
• ui: add companion pairing screen (7f0cf83) - @lthiagovs
• ui: add companion pairing screen with PSK QR code (e3ddf57) - @anarchyysm
• ui: add date/time editor with sd guard and tip input routing (d9d149f) - @lthiagovs
• ui: add deauth detector screen (d47aed0) - @lthiagovs
• ui: add Detect Devices submenu with sniffer, tracker, skimmer, exposure, GATT explorer and track-device tools (b90a87f) - @lthiagovs
• ui: add Detect Devices submenu with sniffer, tracker, skimmer, exposure, GATT explorer and track-device tools (e7fe1ce) - @lthiagovs
• ui: add developer submenu screen (fc2d74f) - @lthiagovs
• ui: add device scan screen (7b28c58) - @lthiagovs
• ui: add device-spam name-list picker and wire it into spam select (31bd9a9) - @lthiagovs
• ui: add editable name list and editor screen (64dd0f6) - @lthiagovs
• ui: add floating art and directional nav to home screen (659e151) - @lthiagovs
• ui: add games menu and games (6db7b54) - @lthiagovs
• ui: add GPIO screen (8989c55) - @lthiagovs
• ui: add handshake/PMKID capture monitor screen (aea5d40) - @lthiagovs
• ui: add haptic screen (638ad37) - @lthiagovs
• ui: add HID keyboard, BLE flood and radio/identity tools (bdd7c26) - @lthiagovs
• ui: add hotspot (AP) dashboard screen (075b03f) - @lthiagovs
• ui: add LoRa chat screen (375f68a) - @lthiagovs
• ui: add mesh link diagnostics screens (telemetry, traceroute, rnode status) (f5d11d8) - @lthiagovs
• ui: add motion level and IMU monitor tools (22f7215) - @lthiagovs
• ui: add MouseAir pairing and mouse control screens (84e6f88) - @lthiagovs
• ui: add new attack/monitor entries to wifi menu (51e5397) - @lthiagovs
• ui: add NFC technology detail screens and wire into menu (276d10b) - @lthiagovs
• ui: add NFC technology detail screens and wire into menu (6fe554d) - @lthiagovs
• ui: add notify and error global toast overlays (d67cd7b) - @lthiagovs
• ui: add octobit status screen (a799fcb) - @lthiagovs
• ui: add Player and Dev carousel entries and drop idle bob animation (4ab0bf6) - @lthiagovs
• ui: add port scanner, probe monitor and target clients recon screens (7a072fb) - @lthiagovs
• ui: add position fix and MQTT bridge config screens (d493e58) - @lthiagovs
• ui: add power screen (162f9c4) - @lthiagovs
• ui: add RAW signal scope screen and wire into menu (daad74b) - @lthiagovs
• ui: add read, write, emulate, card emulate, saved, and config screens (f3b9cbd) - @lthiagovs
• ui: add remote control screen (23872f1) - @lthiagovs
• ui: add reusable reboot screen component (8604c86) - @lthiagovs
• ui: add RFID menu screen (8c03dc3) - @lthiagovs
• ui: add RGB LED control screen (7cc2431) - @lthiagovs
• ui: add SD eject, menu favorites, and quick-panel volume (881883a) - @lthiagovs
• ui: add SD info and generic info modals to message box (bc977eb) - @lthiagovs
• ui: add secure DM thread and channel key screens (4c4e387) - @lthiagovs
• ui: add signal locator screen (e82cb81) - @lthiagovs
• ui: add Storage settings and SD health screens (7e30b28) - @lthiagovs
• ui: add system update screen (17f293e) - @lthiagovs
• ui: add ui_chrome standardized screen header/footer (c809a3a) - @lthiagovs
• ui: add ui_feedback audio/haptic feedback service (c4230e0) - @lthiagovs
• ui: add WAV player and track library screens (f1009c5) - @lthiagovs
• ui: add waves, sigwave and octobit animated status widgets (f8c5da0) - @lthiagovs
• ui: animate page dots with tweened size, opacity and accent (04c2318) - @lthiagovs
• ui: browse rename/delete actions and card-list redesign (1d7abb9) - @lthiagovs
• ui: coverflow theme selector (6caf756) - @lthiagovs
• ui: enlarge on-screen keyboard and add keyboard_is_open() (1d2f0ad) - @lthiagovs
• ui: expand menu with send, radio-config and saved-signal detail (9a6bd3b) - @lthiagovs
• ui: expand RFID screen with clone, saved coverflow, and wiegand decode (22ea210) - @lthiagovs
• ui: first-boot tutorial wizard and screen tips (302812c) - @lthiagovs
• ui: free the outgoing screen on navigation (eb72e1b) - @lthiagovs
• ui: HID mouse screen and payload preview redesign (c68127e) - @lthiagovs
• ui: make the dropdown global (12fe930) - @lthiagovs
• ui: make the status bar and quick-settings dropdown global (1841f3e) - @lthiagovs
• ui: polish NFC read/emulate/config screens and update icons (f861c9c) - @lthiagovs
• ui: re-enable the theme coverflow slide animation (0c56b3e) - @lthiagovs
• ui: rebuild developer menu with Scripts, Console and Diagnostics screens (e8e1ab6) - @lthiagovs
• ui: rebuild home dropdown as status and controls panel (9a93500) - @lthiagovs
• ui: redesign menu_component with sections, hints and scrollbar (87df3fd) - @lthiagovs
• ui: redesign power, battery and about screens with card/gauge layouts (722bafd) - @lthiagovs
• ui: redesign Wi-Fi networks screen with signal cards and scan animation (54f1ad3) - @lthiagovs
• ui: register new radio/tool/dev screens in screen router (c26ee11) - @lthiagovs
• ui: replace mock diagnostics and status with live readings (7b53f5f) - @lthiagovs
• ui: replace spectrum screen with mock menu + read capture (e92bb1b) - @lthiagovs
• ui: retire games from the UI to reclaim flash (6d26f8b) - @lthiagovs
• ui: rework files browser screen (0b64bbe) - @lthiagovs
• ui: rework mesh chat hub and route into new node screens (67fcb8e) - @lthiagovs
• ui: rework NFC emulate/write/saved as card-wallet flows (28bc427) - @lthiagovs
• ui: rework settings menu with Developer grid, new icons and reboot sequence (46ae243) - @lthiagovs
• ui: richer animated first-boot onboarding (1be3586) - @lthiagovs
• ui: route menu carousel items to target screens with bob animation (628c39d) - @lthiagovs
• ui: screen lifecycle close hook - stop hardware/task on screen exit (8d76143) - @anarchyysm
• ui: SD card hot-plug detection with live header and dropdown status (bbf7ce1) - @lthiagovs
• ui: show per-device icons on connect screen (359cf9a) - @lthiagovs
• ui: stream mock init log during splash (564dd57) - @lthiagovs
• ui: swap dropdown ECO badge for a graceful reboot action (53fdf18) - @lthiagovs
• ui: task-WDT panic, bounded ui_acquire, observe-only monitor, input router (d00d233) - @anarchyysm
• ui: tint header icons when active and use static battery (4096d81) - @lthiagovs
• ui: trim screen theme palettes to default and cyber blue (a3e762b) - @lthiagovs
• ui: trim themes to two and persist screen config (bc480a6) - @lthiagovs
• ui: update default theme palette (13a83b6) - @lthiagovs
• ui: visual scan views with waves progress, channel spectrum and client map (f00c2ad) - @lthiagovs
• ui: wire NFC menu to the new screens (dc05c5d) - @lthiagovs
• usb: default USB-C to UART bridge with runtime toggle to native P4 USB (9266433) - @anarchyysm
• wifi-sniffer: expose extended monitor stats over the stats poll (e8d85d0) - @anarchyysm
• wifi: async wifi scan so it no longer blocks the SPI bridge (P4 polls scan status) (4730c20) - @anarchyysm
• wifi: drive UI screens from live wifi_service instead of mocks (1d323b8) - @lthiagovs
• wifi: save AP/client scans to SD on P4 (SD-only, auto on scan complete) (571f709) - @anarchyysm
• wifi: scan and channel-hop 5GHz bands on the C5 (97925b6) - @anarchyysm
• wifi: serve a compact scan record to the companion app (bc5e319) - @anarchyysm
• wifi: show hidden networks as [rede oculta] instead of a blank row (0c99548) - @anarchyysm
• audio: drive the NS4168 CTRL/EN high and drop the phantom mic SEL (69b71ec) - @lthiagovs
• battery: lower BQ25896 SYS_MIN to 3.0V so the ADC keeps reading unplugged (39e4b1e) - @lthiagovs
• boot_report: count real boots in NVS, Octobit reads it instead of self-incrementing [item 18] (a6e02c9) - @anarchyysm
• bq25896: disarm /QON auto-reset and delay BATFET off on power-off (bcc7bea) - @anarchyysm
• bridge: detect C5 only, never auto-flash (update stays manual via 'c5 ota') (fe5bf2a) - @anarchyysm
• bridge: enlarge c5_link_monitor stack to 6KB (send_command + vfprintf overflowed 3KB) (dac16c4) - @anarchyysm
• build: remove games from build (bb13234) - @lthiagovs
• c5/wifi: set band mode before AP config so a 5G-only NVS state cannot boot-loop (07d527c) - @anarchyysm
• c5: add assets/storage littlefs partitions and drop P4-only charger init (321c5de) - @anarchyysm
• c5: keep SPI slave RX always armed to avoid missed bridge commands (3b5703f) - @anarchyysm
• c5: propagate c5_flasher UART init error (2e91729) - @lthiagovs
• c5: store on flash (LittleFS), drop conflicting SPI master init (98fd4cc) - @anarchyysm
• console: disable secondary USB-Serial-JTAG console (blocking writes to the mux'd-away USJ hung the UART REPL) (5250110) - @anarchyysm
• console: free the pre-installed UART0 driver before esp_console_new_repl_uart (it returned ESP_FAIL) (7127c7d) - @anarchyysm
• console: propagate REPL + command-register errors instead of abort (23191ce) - @lthiagovs
• console: shrink REPL task stack 32K->8K (32K internal-RAM alloc failed late in boot -> ESP_FAIL, dead console) (8c86cef) - @anarchyysm
• console: start UART REPL after host_link (UART0 takeover raced boot logging, killing the console) (4e199c0) - @anarchyysm
• core: apply saved boot config and harden low-level drivers (03d7c2a) - @lthiagovs
• core: don't reboot on multi-second renderer stalls like wifi scan (a2457e5) - @anarchyysm
• core: grow console_task stack and keep tos_log off the caller stack (PM deepened call chains) (8ff299b) - @anarchyysm
• core: stop kernel_init aborting on NVS/display failure (e262dbf) - @lthiagovs
• deps: cap esp_lvgl_port below 2.9.0 for IDF 5.5 (ad59a79) - @lthiagovs
• diag: guard coredump summary behind ELF-format config (05d4b5a) - @lthiagovs
• display: dither in place from internal DMA buffers to fix screen corruption (ffcbf90) - @anarchyysm
• display: propagate ST7789 init errors + retry instead of abort (1e00854) - @lthiagovs
• drivers: fix buttons edge detection (9f59820) - @lthiagovs
• drivers: lower st7789 pixel clock to 20MHz and add panel dimension defines (53d693d) - @lthiagovs
• hle: fix task stack size — was 8KB, now respects firmware request (34321a6) - @racerxdl
• hle: harden SPI bridge channel lifecycle and concurrency (448e429) - @racerxdl
• hle: remove duplicate lv_timer_handler() call from main loop (6a58809) - @racerxdl
• hle: render splash assets and menu fonts (75d2187) - @racerxdl
• hle: restore host assets and button input (99063f4) - @racerxdl
• hle: support current dev firmware interfaces (9e1c8d6) - @racerxdl
• hle: upgrade LVGL to v9.4.0, remove duplicate lv_timer_handler (eaa983b) - @racerxdl
• host_link: grow worker task stack 4096->8192 (dispatch into SPI/ops ran the 4K dry) (25d1726) - @anarchyysm
• host_link: guard log hook against re-entrant recursion (1732fd3) - @lthiagovs
• host-link: enable HOST_RX/SYSTEM_LOG streams on C5 and claim BLE session on first frame (ec2023a) - @anarchyysm
• host-link: guard emit_frame against null writer and log re-entrancy (f8118a0) - @anarchyysm
• host-link: silence NimBLE INFO logs to break the C5 log feedback loop (48b32ab) - @anarchyysm
• i2c: drop the bus to 100 kHz to match the 10k pull-ups (beab855) - @lthiagovs
• input: swap the BACK and LEFT button GPIOs (dafb7c9) - @lthiagovs
• ir: guard remote LG decoder against the 0x88 AC signature (e4478fb) - @lthiagovs
• ir: transmit Denon as a complementary frame pair (4749be6) - @lthiagovs
• ir: wire up NEC32 (e2695e9) - @lthiagovs
• kernel: disable dangling lv_port_indev_init (headless V2 bring-up) (550c82a) - @anarchyysm
• kernel: initialize the drv2605l haptic driver at boot [item 33] (95e9df8) - @anarchyysm
• kernel: stop initializing drv2605l (board haptic is an AW8623, wrong chip) (a3119af) - @anarchyysm
• led: brightness steps of 5% with 5% minimum (e314b04) - @anarchyysm
• led: clamp brightness to 100% and channels to 255, use saturated presets (fix purple->yellow overflow) (0f0cfed) - @anarchyysm
• led: make status signals a single short flash (normally off) and drive at full current for vivid color (9f3e829) - @anarchyysm
• led: move blink-off I2C to a dedicated task (esp_timer callback stack overflowed -> task=esp_timer crash) (0b4fa1c) - @anarchyysm
• led: skip the WS2812 RMT init when GPIO_LED_RGB_PIN is -1 (2d58cb6) - @lthiagovs
• log: buffer tos_log writes and remove rotation race (a0ae1a6) - @anarchyysm
• log: drop custom SD log tee, keep only coredump; make host_link relay hook stack-safe (109988c) - @anarchyysm
• log: re-entrancy guard in tos_log vprintf hook (PM logs mid-print caused infinite recursion) (b26d0ee) - @anarchyysm
• ota: add missing header (560f4ba) - @lthiagovs
• ota: validate pending image locally after boot, not via disabled C5 (d48bfe6) - @anarchyysm
• ota: yield per chunk in the OTA write loops (P4 self-OTA + C5 receiver) (ebd4c02) - @lthiagovs
• p4: target ESP32-P4 chip revision v1.x family (136fc61) - @anarchyysm
• pins: align symbols with the drivers (4b5dc4b) - @lthiagovs
• spi_bridge: add out_capacity to send_command and clamp response copy [SPI-5] (c56077d) - @anarchyysm
• spi_bridge: cap SPI_MAX_PAYLOAD at 255 to match uint8_t length, drop dead length checks [SPI-3] (12e3827) - @anarchyysm
• spi_bridge: require valid CRC in POLL resync so junk cannot end the poll [SPI-6] (c978583) - @anarchyysm
• spi_bridge: validate announced length in C5 inline handlers before reading payload [SPI-4] (dc5c731) - @anarchyysm
• spi-bridge: raise WiFi timeout for BLE-coex scans and reject mismatched responses (43cade5) - @anarchyysm
• spi: pad bridge frame to a multiple of 4 for DMA alignment (64cdbc9) - @anarchyysm
• spi: raise scan-status poll ceiling to 40s so slow scans finish before P4 reads results (04a19bb) - @anarchyysm
• storage: correct SD sector-size stats, add card-name accessor, tune file handles (f5ff99e) - @lthiagovs
• subghz: remove ESP_ERROR_CHECK from RX/TX paths (1caa4f6) - @lthiagovs
• sx1262: make HAL re-creatable and tolerate shared SPI3 bus (758defd) - @yajatnarayan
• ui: add missing stdio/stdlib includes to footer (1abf0d5) - @lthiagovs
• ui: format 32bit address & command in receive screen (611d409) - @lthiagovs
• ui: grow UI screen task stacks 4096->8192 (snprintf/printf path overflowed 4K) (c1ad970) - @anarchyysm
• ui: harden msgbox close against re-entrancy and screen teardown (83d2a2f) - @lthiagovs
• ui: remove screen auto-dim/auto-sleep and low-battery brightness cap, keep panel at configured brightness (545a5d0) - @anarchyysm
• ui: route file viewing through a polished text_viewer component (6199bba) - @lthiagovs
• ui: tick-safe input-lock comparison to survive the 49.7-day wrap [item 25] (9d60b1a) - @anarchyysm
• usb: CDC bulk endpoints must be 512 at High Speed (BadUSB HID now enumerates) (54e17cc) - @anarchyysm
• usb: defer native USB (TinyUSB) until mux is switched to native, keep boot serial console clean (d4fef78) - @anarchyysm
• usb: drive TS3USB221 mux select to route USB-C to native P4 USB (2ac17be) - @anarchyysm
• wifi-sniffer: default app sniffer start to RAW when args are omitted (097fd3f) - @anarchyysm
• wifi-ui: prevent scan-list OOM crash and scroll only the focused row (5cf2497) - @anarchyysm
• wifi: cache wifi status off the UI thread so the header never blocks on SPI (a4400e3) - @anarchyysm
• wifi: sanitize scanned SSIDs to printable ASCII (1c30631) - @anarchyysm
• c5: right-size ble buffers and spi bridge stack (ac75b83) - @lthiagovs
• header: stop perpetual redraws - value-compare tint/battery, static wifi icon, drop dead timers (69f949d) - @anarchyysm
• mem: lower spiram always-internal threshold to free internal ram (26d3159) - @lthiagovs
• rtos: right-size battery and feedback task stacks (0b53ba8) - @lthiagovs
• spi: batch stream records per transfer and shorten IRQ pulse (2a6ff87) - @anarchyysm
• ui: collapse header status timers into one slow poll, animate on demand (499d6ee) - @lthiagovs
• display: drop XRGB8888 dithering and restore the RGB565 pipeline (6e53544) - @anarchyysm
• power: disable esp_pm light sleep/DFS - breaks console UART + USB until item 13 locks land (349e49a) - @anarchyysm
• power: disable light sleep again - breaks console UART RX on P4, needs bench iteration (2356ed2) - @anarchyysm