Repository navigation
🎉 BPS now runs on Raspberry Pi — and every 64-bit Home Assistant install
The long-standing blocker in #1 (meson-python: error: Could not find ninja when adding BPS on a Pi) is gone. Home Assistant now ships NumPy and SciPy in its own image, and Shapely installs as a prebuilt wheel in about a second, so nothing is compiled on the device.
Verified for this release on the official ARM64 Home Assistant 2026.11.2 image — the same one HA OS runs on a Raspberry Pi 4/5, Home Assistant Green and Yellow: BPS installs, starts cleanly and its full test suite passes.
If you tried BPS on a Pi before and gave up, update Home Assistant and try again. See Platform support.
Fixes
- HA 2027 readiness: no more
device_registry.devices(#38) orvia_devicedeprecation warnings (both would stop working in HA 2027.8/2027.9) - No more
/api/bps/cords 404in the browser console when nothing is tracked yet (#7, #32) - Select existing now lists floor plans in every format the upload accepts — gif, svg, avif, jfif, … (#8; thanks @Grazerquart for #16)
- Receiver calibration explains "0 receiver pairs": no scanners, no matching receivers, receivers not beaconing, or out of range (#40)
- Empty BPS devices can be deleted from the device page (thanks @cfoxga, #42)
Also
- Brand icon for the HA integrations page (thanks @frenck, #41)
- Shelly Gen2+ iBeacon script for calibration probes (thanks @baronfel, #36)
- Requirements:
numpy>=2.0.0,scipy>=1.16.0 - README: the layout lives in
config/.storage/bps(formerlybpsdata.txt)
Update
- Update BPS via HACS (or install v0.2.2)
- Restart Home Assistant
- Hard-refresh the browser (Ctrl/Cmd+Shift+R)
Full changelog: v0.2.1...v0.2.2