Skip to content

Releases

JoyPro2 2.7.1

Choose a tag to compare

@Holdi601 Holdi601 released this 16 Nov 23:44

JoyPro 2.7.1

Fixed

  • Tours point at something in every step again. With binds already in your games, the Start page tour's "Set up
    automatically" step highlighted nothing, because Set it all up for me is not shown then. It now points at
    Fill the gaps... (or Import, then fill the gaps) and says what that does. Steps on other pages open what they
    talk about first (an axis for the curve, a relation for its commands, the Overview tab of the Virtual Joystick page,
    closed sections) and scroll it into view. A step whose control is not there in your setup is left out instead of
    showing a card that points at nothing.

JoyPro2 2.7.0

Choose a tag to compare

@Holdi601 Holdi601 released this 16 Nov 19:25

JoyPro 2.7.0

More than one input per relation, several actions at once, a quick way to get binds, a welcome with tours and F1
help, games on the Xbox pad by themselves, and your binds on the DCS kneeboard.

New

  • Several inputs per relation is now a normal feature. No setting to switch on any more (Settings > Experimental is
    gone): any relation can be on more than one button or axis, each with its own device, modifiers and axis curve. A
    relation with one input works and saves exactly as before.
    • Every page knows a relation's other inputs. Press a button on the second stick and Follow input finds its
      relation. The Layout page's picture and tables name the relation on that input too. The Devices filter and the
      search (with "Everything") of the Relations and Binds pages find a relation by any of its inputs, and the device
      lists offer those devices.
    • One curve per input. For an axis on two devices, Axis response on the Binds page has an Input list at
      the top: pick input 1 (the main one) or input 2 and set its own curve, dead zone and saturation.
  • Select several actions of a relation. In the relation editor, Ctrl+click or Shift+click action cards (Ctrl+A for
    all). A bar offers Copy, Move to... and Remove:
    • Copy (Ctrl+C), then open another relation of the same kind and press Paste (Ctrl+V). The actions come with
      their aircraft, also the switched-off ones.
    • Move to... asks: New relation (type the name; it is an axis or button relation like the old one) or
      Existing relation, picked from a list you can search. Only relations of the same kind are listed.
    • Remove (Del) takes them out after one question.
    • The right-click menu of an action has Copy and Move to another relation... too.
    • Move the actions of several relations: select several relations in the list (Ctrl/Shift+click) and press
      Move actions to...: all their actions go to one relation, new or existing, and the emptied relations are
      deleted.
    • Each of these is one step: one Ctrl+Z takes it back.
  • Set it all up for me. At the first start, Done, and set everything up for me saves your games and then sets
    up your stick, throttle and pedals by itself for the games where nothing is assigned yet. You see the result as a
    plain list ("Trim rudder left", never an id, and in your language: "Seitenrudertrimmung links", "Kanone feuern",
    the PlayStation buttons as "Quadrat", "Kreuz" ...), press Use these buttons, then Write to my game, and fly.
    The Start page has the same as its blue Set it all up for me (the full wizard is the grey Set up step by
    step...
    ), and so does the welcome's "Just make my stick work". The line at the bottom stays calm: "All important
    buttons are set. Some rare extras had no room (18). That is OK."
    • One blue button at a time. After Use these buttons that button greys out, so the next one is the only blue
      one. The tools to move, swap or leave out a function wait behind Change something; the picture of your stick
      opens big with Show the picture big.
    • ACE COMBAT and the other Xbox-controller games end with the pad, not with an export. Their second button is
      Set up the pretend controller: the setup window closes and the Virtual Joystick page shows the last steps (the
      free helper ViGEmBus when it is missing, Test, and when to press Start). The tour card waits while the setup
      window is open ("Finish the setup window first"); it never runs ahead of it.
    • The helper's install says what to do first: tick the box below the license (it glows), then Install
      ViGEmBus
      (it glows next). Going on without it, the card first says that the game will not see your stick; ticking
      the box after that brings back "Now click Install ViGEmBus". Coming from the first start, a card first says why
      ("Your game only knows an Xbox controller. JoyPro turns your stick into a pretend one."). While the card waits for
      the setup window there is no Skip.
    • One name: the pretend controller. For players whose games all use it, the bar button, the page, its status,
      the ViGEmBus card (now in your language) and F1 say "pretend controller". vJoy, HidHide, the forwarding rate and
      the modes wait under Show details for experts, which stays after a restart.
    • Test stays on screen after the click: "Now move your stick. Does the picture move? Then click Next."
    • Back from a full-screen game: the card and a small picture show Alt+Tab: start the game, at its title screen
      hold Alt and press Tab, click Start, Alt+Tab back. Start pressed before ACE COMBAT 8 or Hell Let Loose:
      Vietnam runs says "Too early" and how to do it; Auto start's tooltip says it is too early for these games.
    • Write to my game asks nothing when the game has nothing on its sticks yet. When the game already has stick
      buttons, it asks one plain question: "IL-2 Sturmovik: Great Battles already has buttons set. Use the new ones
      instead? JoyPro keeps a copy of the old ones, and you can undo." Use the new ones writes them (with the backup
      as always); Keep the old ones too writes your new buttons next to the old ones and removes nothing (where a
      button is already taken, the old one stays and Check shows it); Cancel writes nothing, and the setup window
      says to press Write to my game again when you are ready. The Export page keeps its own questions.
    • The calm line is right for IL-2 too. Gear up and down on two buttons, the trim axes as trim buttons and the
      wheel brakes on one button count as placed, so a flyable plane no longer reads "A few important ones had no room".
    • The quick window speaks plainly: "Look: what goes where" (no step number), no aircraft list for a game with one
      setup, and the inputs as you hold them ("Twist", "L1", "Hat 1 left", not "Z rotation" or "Trim hat left"). With
      Easy words its sentences are the easy ones (German "du").
    • IL-2's function names in your language in the quick review and on the Binds page ("Fahrwerk einfahren",
      "Bombenschacht auf/zu", "Waffen nachladen" ...), in all 38 languages. A name you gave a relation stays as it is.
    • Afterwards it says "It worked!" on the Start page ("IL-2 Sturmovik: Great Battles now has your buttons. JoyPro
      kept a backup of the old ones."), then a short tour shows where to change a button later (first pick a game control
      in the list, then Record input) and how to send it to the game again, and ends with "Done! Start ".
    • When the setup stops before the result (no game or no stick found), it offers Try again and Set it up step by
      step
      instead of only a message.
  • Set up your devices, right on the Start page. JoyPro looks which of your games have nothing assigned yet and says
    so: "Set up your devices for War Thunder, Star Citizen and MSFS 2024". Set it all up for me does it by itself;
    Set up step by step... opens the setup with exactly these games ticked. It only reads your games' control files; nothing changes before you apply.
    • Your own binds stay. A game where you already made binds yourself is listed below with Import, then fill the
      gaps
      : your binds come into JoyPro first, then the setup only uses the controls that are still free. Games already
      in your profile get Fill the gaps....
  • A welcome that asks what you want to do. Everyone who opens this version for the first time, also when coming
    from an older JoyPro 2, is asked once: Play ACE COMBAT with my flight stick, DCS World or Falcon BMS,
    Just make my stick work, Show me around, I used JoyPro 1 or No tour, and how long a tour should be
    (Short or Long, with every extra). JoyPro picks the answer from the games it found (DCS or Falcon BMS: the DCS
    way; only Xbox-controller games: the pad way; otherwise the quick way) and says why above the answers. It shows after
    the first-start game setup and never comes back by itself; when you pick Done, and set everything up for me there,
    the setup starts instead and the welcome does not open next to it.
  • Easy words. One switch (on the welcome, in the first-start window, as Easier words on every tour card, and in
    Settings > Tours) for anyone who wants it simple, children
    included: big cards, the shortest texts (at most 12 words a sentence; German says "du"), and F1's help starts with
    one plain sentence and keeps the details behind More details. It stays after a restart.
  • Small pictures that explain. Four drawn cards: what a joystick axis is, what the pretend Xbox controller is, what
    Export does (and that Undo brings the old buttons back), and Alt+Tab.
  • Tours that show the real buttons. A tour dims the window, makes the real control glow and waits for your click
    ("Waiting for you to click the glowing button"), with Back and a big Next; Skip and End tour are small
    links. Your window size, UI scale, theme and page order do not matter,
    and it goes on at the same step after a restart. Every page has Tour of this page (in the bar at the top and the
    Help menu); Settings > Tours lists every tour, shows the welcome again and can ask again at the next start.
    Double-click JoyPro 2 - Tour in JoyPro's folder to open the welcome and its tours any time; when JoyPro is
    already running, it opens there.
  • F1 explains any button. Press F1 (or Help > Help mode (F1) in the bar at the top) and click any button,
    field, list row or tab: it does not run, and a small window next to it says what it does in one plain sentence, then
    (behind More details with easy words) the details, why it matters, what...
Read more

JoyPro2 2.6.5

Choose a tag to compare

@Holdi601 Holdi601 released this 07 Nov 18:11

JoyPro 2.6.5

New

  • Tick the aircraft a curve is for. The axis response no longer asks you to pick a "scope" from a list. Applies
    to
    shows all games, each game of the relation and each DCS aircraft with a checkbox, and next to each what it uses
    today: "own curve", "same as AH-64D BLK.II Pilot", "uses DCS". When you open a relation, the aircraft that use DCS's
    curve are ticked (on a new relation: all of them); aircraft with their own curve stay unticked, so you do not overwrite
    them by accident.
  • Save says what it will do. "Save stores it for DCS, all its aircraft (5)" keeps one curve for DCS, so these
    aircraft follow it later too. Untick two and it says "Save stores it for these aircraft (3 of 5): ...": those three get
    the curve, the other two keep theirs. If you tick an aircraft that has its own curve, an orange line says that its curve
    will be replaced, before you save. Each save is one step: one Ctrl+Z takes it back. Use the game's curve again does
    the same for the ticked aircraft.
  • JoyPro remembers what you did. Under the list, Curves now groups the aircraft by the curve they share
    ("AH-64D CPG, AH-64D Pilot, Ka-50 III: same curve", "SA342 Copilot, SA342 Pilot: uses DCS"); a click ticks a group.
    The aircraft you last saved for come back ticked when you open the relation again, also after a restart. Copy to
    another axis
    copies to the same aircraft.
  • From a relation to its bind. The bind under a relation's name ("MFD CENTER · BTN 11", now with a small arrow) is
    a link: a click opens the Binds page with that bind selected, and Back (Alt+Left) takes you back to the relation.
    The other way round was already there: Open in Relations on the Binds page.

Fixed

  • The aircraft you filter for come first. With the Games filter on "DCS World: F-16C_50", an action for the F-100D and
    the F-16C_50 still named the F-100D first everywhere: "Thrust · DCS World · F-100D +1 more" under the relation's name,
    "F-100D, F-16C_50" in its row, the F-100D's icon, and the F-100D on top of its aircraft list. Now the F-16C_50 leads:
    "F-16C bl.50 +1 more", "F-16C_50, F-100D", the F-16C_50's icon, and in the aircraft list it is first under
    "Filter: F-16C_50", then the others as always. The Binds page does the same with its own Games filter (the search lines
    and "What it does"). Nothing is hidden and your profile does not change: only the order you see. Without a filter
    everything looks as before.
  • Open catalog follows the Games filter too. With "DCS World: F-16C_50" filtered, Open catalog on a relation for
    the F-100D and the F-16C_50 opened the F-100D's list. Now it opens the F-16C_50's (or the filtered game's) when the
    relation has it. Without a filter it opens the relation's first aircraft as before.
  • History: the button now says what it does. "Restore" on a version is now Roll back to here: the profile
    becomes exactly as it was at that point, and every change after it is taken back in one step. Clicking the version
    five changes ago takes back all five. The later versions stay in the list, and one Undo (Ctrl+Z) brings them all
    back. The question before it and the line at the bottom use the same words.

New (experimental)

  • One relation, several inputs. Settings > Experimental > Several inputs per relation (off by default). Then a
    relation can be on more than one button or axis at once, each with its own device, modifiers and axis curve: the
    same grip on two bases, a second fire button, a throttle on two throttles. On the Binds page the relation shows
    More inputs: Record another input, Make main, Remove. Copy every bind of a device to another device
    puts everything of one device on the matching buttons of the other in one step (Preview first; Ctrl+Z takes it back).
    JoyPro matches the buttons like Replace device does; if your second base numbers the grip's buttons differently,
    press them once and change the few that differ.
  • Exports write every input where the game can hold several per action (DCS, IL-2, FSX/P3D, Arma, X4 and others; MSFS,
    Elite, War Thunder and a few more up to their own limits). Games that keep one input per action (Star Citizen,
    Battlefield, G-Rebels, HLL Vietnam, VTOL VR native, WARDOGS, Ace Combat 8) get the main input, and the export names
    the relations. Importing your own export brings every input back into the same relation.
  • With the switch off nothing changes: your profile, your exports and the pages stay exactly as before.

JoyPro2 2.6.4

Choose a tag to compare

@Holdi601 Holdi601 released this 06 Nov 22:53

JoyPro 2.6.4

New

  • See what a device still lacks in a game. Tick a game or an aircraft under Games and a new chip appears next to
    Bound and Not bound, e.g. No action in Falcon BMS (4). Click it: the list shows the relations that have no action
    there yet. Tick a device under Devices too and you see what that device still lacks, without comparing lists by eye.
    Add an action and the count drops at once; the relation leaves the list when you open the next one. It works with Sort
    and the search, stays on after a restart, and the Binds page has it too.
  • The axis response speaks DCS's numbers. For DCS, dead zone, saturation X/Y and the user curve points now read
    0 .. 100, as in DCS's own dialog (curvature -100 .. 100, as there): just type 8 instead of 0.08. Up / Down moves by 1,
    Shift by 10. Your profile and what JoyPro exports stay as they were (8 here is 0.08 in the file), and a value with more
    decimals stays exact until you change it. The curve's numbers and the live position follow. Other games keep their own
    units, and a line above the boxes says which they are.

Fixed

  • A number outside the range no longer changes without a word. Typing 150 still goes back to 100 when you press Enter
    or leave the box, but the line under the box now says so. And if you type 0.08 out of habit, it asks: "Did you mean 8?"
  • "Not bound" says what it means. Its tooltip now reads: no input at all, in any game. A relation with no action in one
    game is what the new chip above is for.
  • Detent mode explained. The section now says in plain words what it does, that the calibration belongs to the device
    axis (every throttle relation on it shares it, a left and a right lever are separate axes), and why full power at the
    detent is on by default: an aircraft without afterburner has nothing behind the detent, so it reaches full power there.
    The line below says plainly whether this axis is calibrated, with its values, and what happens if it is not. Nothing
    about how detent mode works has changed.
  • Add actions said it found nothing, right above the actions it found. Searching "Bomb Release Button" in a relation
    that already holds it said "No action's name has every word". JoyPro had found them; they are already in your relation.
    When the only results are those, there is no box any more; the line above the list says: "No new actions: the 2 found are
    already in this relation (see below)", with Same meaning on or off. With Same meaning off and other actions
    hidden, a short box says: "No new actions with every word of "Bomb Release Button": the 2 found are already in this
    relation (see below). 11 more found by what they do are hidden because Same meaning is off.", with Show same meaning.
    Suggested for this relation says the same kind of thing when the game you ticked is already in the relation.
  • Actions already in the relation name their aircraft again. Since 2.6.3 their aircraft line was empty, so the F-4E
    pilot's and WSO's "Bomb Release Button" looked like the same row twice. Now one says "F-4E-45MC" and the other
    "F-4E-45MC_WSO". An action the relation has for only some of its aircraft still names only the ones you can add.
  • "0 of 0 free aircraft" is gone. The button under such an action now says what the relation has: "1 of 1 aircraft in
    this relation", or "1 of 3 aircraft in this relation" when the other two aircraft use the command for something else.
    The list it opens only shows the aircraft: nothing can be added from an action that is greyed, so it no longer has ticks
    that do nothing. To add one of those aircraft, use the action's own aircraft list in the relation.
  • The line above the list counts what is listed. With Same meaning off it said "11 actions in 1 game + 7 already in
    this relation" with nothing to add and two rows below. It now reads "No new actions + 2 already in this relation
    · understood as Weapon release (pickle) · 11 with the same meaning hidden (Same meaning is off) · 5 more in this relation
    hidden". With Same meaning on it counts as before.
  • The Catalog's filter shows what you asked for. In Falcon BMS, "RMFD OSB 20" listed all four displays' OSB-20 and the MFD
    power switch, equal and by category, with the switch marked Recommended and RMFD neither first nor marked. Now it lists
    RMFD: OSB-20 Button - Push, marked Recommended, as Add actions does. "thrust" still finds the throttles. Actions that
    are only related are listed only when nothing else fits, and the line above the list says so.
  • Recommended in the Catalog follows your words. While a filter is on, the chip marks the best action for what you typed, and
    the best rows come first. With an empty filter it shows the best action of each function, as before.
  • "OSB20" finds "OSB-20" in the Catalog, as it does in Add actions. And "OSB 3" no longer lists OSB 1 because of a digit in
    the game's id.
  • Same meaning now works in the Catalog too. It is the same remembered switch as in Add actions, next to Only free. When it
    is off, the line above the list says how many actions it hides.
  • Reset to default takes a marker you moved a moment ago with it. The positions are saved 2 seconds after the last move. If you
    pressed Reset to default before that, the move stayed after the reset, or came back a moment later. Now it is saved first,
    goes with your other changes, and Undo reset brings it back.
  • "right now" is not a side. Since 2.6.3 a sentence like "stop my ship right now" or "a wider area left and right" lost
    its best matches, because "right" was read as the right side. Those rows are found by what they do again.

JoyPro2 2.6.3

Choose a tag to compare

@Holdi601 Holdi601 released this 05 Nov 17:50

JoyPro 2.6.3

Fixed

  • Copy to another axis: the Copy button did nothing. It closed its window before the copy ran, so no axis got the
    settings. It works now; the settings of the axis you were on were never lost, so you can copy them again.
  • FSX and Prepar3D: elevator and elevator trim up and down had their titles swapped. "Up" means nose up, as in
    Microsoft Flight Simulator. If you put these actions in a relation by their old title, check its direction.
  • Add actions: the action you searched for gets "Recommended", not its neighbour. Searching "LMFD OSB 15" in Falcon
    BMS marked "FMFD: OSB-15 Button - Push" as Recommended, and "LMFD: OSB-15 Button - Push" said "Differs: another action
    for the same thing". Now the LMFD row is under Name has every word, with its words marked, and is the one
    recommended. "OSB15" and "OSB-15" find it the same way. Recommended in a search now goes by how well a row fits what
    you typed: a row that fits worse never gets it from one that fits better, and a row under Related never gets it.
  • A number or side you type counts. When you name "15", "left", "right" or "LMFD", the actions without it are no
    longer "Same function": the other displays' OSB 15, the MFD switches or "APU Fire Pushbutton" are under Related
    (folded), and a row says what it lacks ("its title does not have 'LMFD'"). "LMFD" also means "Left MFD", so DCS's
    "Left MFD OSB 15" comes first in the F-16. In the DCS F-16, "OSB 15" no longer finds the radar warning receiver because
    of its "SPO-15". "thrust" still finds the throttles, "gear up" still finds a "Toggle Gear", and "yaw left" still finds
    the rudder axis.
  • "OSB 15" with no display named: in Falcon BMS the OSB 15 of all four displays are recommended, none is called a
    variant of another. In the suggestions for a relation named "MFD LEFT BTN12", the LMFD's OSB is the recommended one.
  • Add actions: the game filter stays. Choosing a game chip ("Falcon BMS") now lasts: when you open another relation,
    when you search again, and after a restart. If that game has nothing for a search, the list says so, tells you how many
    results the other games have, and Show all games switches the filter off in one click. The chips of Suggested
    for this relation
    stay the same way.
  • Relations: the Games filter on the left stays on. Opening a relation the filter hides (from a tag, the check, a new
    relation) used to switch all filters off. Now they stay as you set them, and that one relation is listed until you
    change the filters.
  • "Already in this relation" for some of the aircraft. An action a relation has for most of its aircraft looked like
    a new one: "F1 Cockpit view" in the relation "F1 Cockpit view" was an ordinary row with 20 of 20 aircraft ticked,
    because one aircraft was still missing. Now the row says "already in this relation for 19 of 20 aircraft" and offers
    only the missing aircraft; in its aircraft list the others are marked. With all aircraft in, it is greyed at the bottom
    as before.
  • "Which grip?" on rudder pedals. Start page > Your devices asked "Which grip?" on devices that have no grip, and the
    Layout page gave no way to answer except the Model... menu. The chip now says Which model? when several products
    share a USB id, and a click on it opens the Layout page with that device and the choice open. Your answer stays after
    a restart and the chip goes away.
  • The notice about aircraft JoyPro added now says what it means, and comes up less often. It said "not bound by you"
    and "a second bind", and counted "Default" as an aircraft, so a profile with nothing but "F1 Cockpit view: Default" got
    a warning about 17 aircraft. Now it says that an older JoyPro switched these on, what Take them out does and that
    your own binds stay. "Default" and DCS's other input layers (except the UI layer, whose binds work in every aircraft)
    are no aircraft: they are not counted, they come last in the list, and if there is nothing else you get no notice. The
    list reads better too: "'F1 Cockpit view': Default (not an aircraft)".
  • Your own imports are no longer offered for removal. If the command lists had changed before an import (Refresh DB,
    an update), that notice could list aircraft you had really imported as "not bound by you". The same went for taking
    over changes made in a game. Imports and take-overs are never offered now.
  • MFG Crosswind V2/3 is no longer asked about. The pedals call themselves both models, and both have the same inputs,
    so the answer would change nothing about your binds. If you want the other model's picture, Model... > Choose another
    model still does that.

JoyPro2 2.6.2

Choose a tag to compare

@Holdi601 Holdi601 released this 03 Nov 22:44

JoyPro 2.6.2

New

  • Add actions: Same function and Related. Below the actions whose name has every word you typed, the list now has
    two parts instead of one "Same meaning": Same function (the action does what your words mean: "thrust" finds the
    throttles, "make the plane go faster" the throttle up) and Related (looser links: a word of the action's
    category, some of your words, a similar word). Related is folded with its count; a click on it shows the actions.
  • Add actions: why was it found? Hover the label on a row: it says it in plain words, for example "'brakes' is
    understood as 'Wheel brakes'; this action's function is 'Wheel brakes axis'", "'thrust' is a synonym of 'Throttle'"
    or "Related: its category 'Gears, Brakes, Hook' has the word 'brakes'". The labels "word match" and
    "Title match (32%)" are gone.
  • Add actions: Same meaning on or off. The new switch next to All / Axes / Buttons: off, only the actions whose name
    has every word are listed, and the line above the list says how many are hidden. When no name has every word, the
    list says so and Show same meaning switches it back on in one click. The switch is remembered and is also in
    Settings > Relations.
  • Add actions starts empty. Opening a relation no longer puts its name into the search box. Type what you want to
    add, or use Suggested for this relation, which still suggests by the relation itself.
  • Axis response: exact numbers. The 11 points of the user curve are number boxes now (0 % ... 100 % of the stick
    travel) instead of a second row of sliders. Type the value, or press Up / Down (Shift: ten steps) or turn the mouse
    wheel in the box; the white points on the curve and the boxes always show the same. Dead zone, saturation X/Y and
    curvature show their range next to the box ("0 .. 1"), and a number outside it goes back to the nearest end.
  • Copy to another axis. Copy to another axis... in the axis response puts the same dead zone, saturation,
    curve and slider on another bound axis in one step, for example Thrust Left to Thrust Right (the other side is
    offered first). Invert goes along only when you tick Copy invert too, because left and right often differ
    there. One Ctrl+Z takes it back.
  • Relations: the aircraft filter in the open relation. With the Games filter on an aircraft ("DCS World:
    F-100D"), the open relation's actions for that aircraft come first with a blue edge and Filter: F-100D on their
    aircraft line; the other actions are folded in Other aircraft (n) below, a click opens them. The relation stays
    complete, so nothing is changed by mistake; clearing the filter shows the plain list again.

Fixed

  • Refresh DB no longer switches on aircraft you never bound. After the command lists changed (Refresh DB, or an
    update with new lists), JoyPro used to switch on every other aircraft that shares a command with one of your actions:
    a helicopter power lever relation with your AH-64D, Ka-50 III and Mosquito suddenly also had the F-15C, A-10C,
    MiG-29, Su-25 and more, and an export would have given all of them a second throttle axis. Now JoyPro only adds an
    aircraft that is new in the lists (a module you installed since), never one that was there and that you did not
    choose, and never "Default". An aircraft that only gets a new command through a DCS patch or a mod is left as you set
    it up.
  • Your profile is put back if this already happened. When you open a profile, JoyPro looks in its history for that
    step. If it finds one, a notice under the bar says "JoyPro added 448 aircraft to 180 relations on 03.11.2026 after
    the command lists changed", with the list per relation and aircraft. Take them out takes the ticked ones out again
    (one Ctrl+Z brings them back), Keep these aircraft leaves them and stops asking, Later asks the next time.
    Nothing changes until you choose.
  • What JoyPro changes by itself is its own step in the History. When JoyPro adjusts the profile to new command
    lists, that is saved as "Updated to the new command lists: 3 aircraft in 2 relations" before your next change, so
    Ctrl+Z takes exactly it back. Before, it was saved under the name of your next click. Previews (suggestions, dry runs)
    no longer save anything.
  • The question "does different things in different aircraft" is clear now. It names the button, the aircraft and
    what the button does in each ("BTN 20 does different things in these aircraft: F/A-18C: RADAR Switch - EMERG ·
    F-16C: KY-58 MODE Knob - RV. Where should BTN 20 work?"), and the buttons say what happens: Only in the F/A-18C
    (take it off the F-16C)
    , Keep it in both (F-16C keeps KY-58 MODE Knob - RV), Decide later. "Keep it in
    both" changes nothing in the profile, it only stops asking on this PC (its tooltip says so).
  • The question no longer proposes to take out your own binds. An aircraft that came from your game files (an
    import) is never the one it suggests to drop, and a helicopter's engine throttle counts as the same as the throttle
    or power levers of the other aircraft: the Ka-50 III throttle is no longer flagged next to the Apache's power levers.
  • An action with different meanings per aircraft shows its main meaning as the title, the other meanings on lines
    of their own ("F-16C: KY-58 MODE Knob - RV (different function)", "also called: Thrust (13), Power Levers (Both)
    (2)") instead of one long comma list.
  • Add actions: "brakes" and the landing gear switches. In a relation like "Wheel Brakes (analog)", searching
    "brakes" in DCS showed the F-4E's landing gear, arresting hook and anti-skid switches as "Same meaning". They were
    found only because their category is "Gears, Brakes, Hook"; they are now under Related (folded) and say so. The
    wheel brake axes were always found: they are at the top under "Name has every word", and the word "Brake" in their
    title is now marked for "brakes" too.
  • Search: singular and plural. "switches" now finds "Switch" the way "brakes" finds "Brake" (also "flashes",
    "passes", "boxes").
  • Add actions: the F-4E's "[SimPit] ... (Switch)" actions were labelled just "axis". DCS really lists them as axes
    (for home cockpits that wire a switch as an axis); they now say "axis (sim-pit switch)" with an explanation.
  • Add actions: the line under a row's title showed a stray quote ("same function: Throttle axis' ('Throttle')").
  • Binds: the axis response opens by itself when you pick an axis. If you close it, it stays closed for the next
    axis (also after a restart) until you open it again.
  • Binds: Modifiers on this bind has a close button. The x closes the panel down to its title line; Show opens
    it again, and JoyPro remembers your choice.

JoyPro2 2.6.1

Choose a tag to compare

@Holdi601 Holdi601 released this 02 Nov 18:45

JoyPro 2.6.1

New

  • Check: ignore a warning, and the list of ignored ones. "Same command on two buttons", "One button does two
    things" and "One button runs two commands" have Ignore (it replaces "Keep both", which was the wrong word for
    three or more buttons): the binds stay as they are and the card goes away. When the command lands on one more button
    later, the card comes back by itself, marked new, with "Shown again: now also on ..." - so you can work through the
    warnings once and then only see the new ones. Ignored warnings (n) next to the search lists everything you
    ignored in the cards' words, with Show again for each and Show all again. Every step is one Ctrl+Z.
  • Add actions: the list has two parts: Name has every word (the action's title has every word you typed) and,
    below it, Same meaning (found by what the action does: the same function, a synonym or a description), each with
    its count. Actions already in the open relation stay greyed at the very bottom.

Fixed

  • DCS: commands that mods add are in the command list. Commands that DCS mods add (for example the Input Command
    Injector with a community keybinds pack, or modules in Saved Games\DCS\Mods) are now in the command list, with the
    same ids DCS gives them, so a relation no longer says "not in its list" for a command DCS shows. JoyPro reads the
    Saved Games folder your DCS installation really uses (DCS.openbeta for an OpenBeta installation). When your mods
    change, the Start page says "Your DCS mods changed the controls list; rebuild the command list": press Refresh
    DB
    once. A command that is in your DCS bind files but not yet in the list is known anyway and marked "from your
    DCS files".
  • Add actions search: when something matches all of several words, actions that match only some of them are left
    out. "master reset" in the F-14 lists only "MASTER RESET" and "Master Caution Reset" and is understood as the master
    caution reset; before, it also listed every exterior lights master and master arm switch by the word "master". A
    single word ("master" still finds all 35 titles with it in the F-14, "reset" still finds "MASTER RESET") and a
    sentence that nothing matches completely ("make the plane go faster") find everything that means it, as before.
  • Add actions: titles with every word you typed stay above the actions that only mean the same in every sort and
    grouping (Sort: Game and the other sort levels, By function, the game chips, Show more). With Sort: Game, a game's
    actions used to be sorted by title only, which put "Exterior Lights Master Switch" and "Master arm" above "MASTER
    RESET" for "master reset".

JoyPro2 2.6.0

Choose a tag to compare

@Holdi601 Holdi601 released this 01 Nov 20:03

JoyPro 2.6.0

New

  • Relations page: the filters (groups, games, devices, bound / not bound, axes / buttons, sort and what the search
    looks at) fold up under "Filters", so the list gets the room on a 1280x800 screen. Folded, the line says which
    filters are on and how many relations are shown. Open or folded is kept after a restart.

  • Layout page, experimental and off by default: the marker assistant can ring the spots of a photo that look like
    buttons, hats or switches (More > Detected spots (experimental)). A marker you place near a ring goes onto its
    centre. JoyPro does not know which input a spot is and places nothing by itself; it finds about six of ten controls,
    axes and dark controls on a dark device least. Works offline, nothing is downloaded.

  • Virtual joystick: modes like in Joystick Gremlin. Give a game's virtual functions named modes (Combat, Landing ...)
    that inherit from each other, and switch them with a button: switch, hold, toggle, cycle or back. An input can do
    something else in every mode.

  • Virtual joystick: a function can read another function's output (an axis band that latches a toggle, a curve that
    feeds a split). JoyPro refuses chains that would go round in a loop.

  • Virtual joystick: new functions "Remap" (an input straight to one or more virtual outputs, also keys) and "Mode
    switch".

  • Virtual joystick: the Functions tab shows all functions of a game as a graph. Drag an output onto an input to chain
    two functions, click a wire to remove it, remove or open a function from its node.

  • Coming from Joystick Gremlin: import your Gremlin profile (R13 or R14) on the Functions tab. Modes, remaps, response
    curves, keyboard mappings, macros, merged axes, tempo, double tap, chain, toggle and hat buttons become virtual
    functions. Before anything is saved you see what was imported, what works a little differently, and what JoyPro
    cannot do.

  • HUD, show and hide everything: every widget can be shown on your screen and in the stream separately, and every
    part of a widget can be switched off (name, kind, picture, buttons, held buttons by name, axes, axis names and values,
    stick position, hats, the header's picture). Everything is kept after a restart.

  • HUD styles: 40 presets (from Glass, Neon and Minimal to Military green HUD, Amber MFD, Airliner PFD, Synthwave,
    Retro terminal, High contrast and more) and design options for each part: cards, text and font, the shape of the stick
    element (ring, square, crosshair, radar, dot), of bars and levers (rounded, square, thin, segmented, outline), buttons
    and chips. Save your own styles, export them as a file to share, import them, and give a single widget a style of
    its own.

  • HUD, the aircraft's own stick and throttle: a new widget shows the stick and throttle of the aircraft you fly as
    the game draws them (from the cockpit pictures of your games or a picture pack, else JoyPro's drawing of the grips).
    They tilt and slide with your stick and throttle, and the control of the button you press lights up (a Warthog's TMS
    up lights the A-10C's TMS). Pick the aircraft yourself or let DCS tell JoyPro.

  • Streamer mode: a page for OBS's Browser Source (http://127.0.0.1:8765/hud, on this PC only) shows the HUD with
    a truly transparent background, live, with the same styles; no custom CSS needed. Or a stream window for Window
    Capture that may sit behind the game, transparent or on a chroma key colour. Your own screen and the stream are
    independent: play without a HUD while the stream shows it.

  • HUD performance: the HUD updates at most 30 times a second (15, 30 or 60 to choose), only when something
    changed; the stream page costs nothing while OBS is not connected.

  • Cockpits page: photos for cockpits no game has pictures of. For 40 aircraft, helicopters, spacecraft and ships
    (A350, A380, 777, ATR 72, E-Jets, CRJ, Q400, UH-60M, CH-47D, NH90, F-22, F-35, Apollo, Space Shuttle and more)
    Download photos fetches every photo of the cockpit in one click, with progress, checks each one and takes the web
    archive's copy when a site no longer has it. The manual then gets a page per photo with JoyPro's numbered labels for
    the main panels on top (a click on a label opens that panel's page), and the photo's author, licence and site below.
    The photos are kept on your PC only.

  • Cockpits page: the MH-60R / MH-60S Seahawk gets three photos with labels: its cockpit in flight and the MH-60R's
    centre console with the sonar and stabilator controls.

  • Cockpits page: ships and aircraft that exist only in a game (Star Citizen, Nuclear Option) show the cockpit
    JoyPro rendered from your game files where a photo would be, as the first picture under "Photos". It is made on your
    PC and stays there; nothing is downloaded and nothing is asked. The same goes for any cockpit without a photo whose
    game JoyPro reads. The Star Citizen Carrack, Nomad, Defender, C2 Hercules, Mercury Star Runner and Gladius, which
    have no real cockpit to photograph, now show their render there.

  • Check, "Same command on two buttons": Replace '...' on with... for the button that should do something
    else (the [Dec] that should be [Inc]). The relation opens with Add actions searching for the command's name and its
    aircraft; tick the right action and press Replace with the ticked: it takes the old command's place in one step
    (one Ctrl+Z).

  • Back to the check: a relation opened from a Check card shows Back to the check above its name; it returns to the
    card (the check runs again after a change).

  • Add actions and suggestions, used elsewhere: an action switched on in other relations has one tag: in 'Button CP2 B1' opens that
    relation, in 3 relations lists them and a name opens it; Back to '...' returns to your relation and search.

Fixed

  • DCS export is faster: a file that would get exactly what it already has is no longer rewritten and copied into
    the backup first, so exporting again after a small change takes about half the time on a big Saved Games folder.
    "Undo last export" still undoes the export you just did, also one that changed nothing.
  • Add actions search: an action whose title has every word you typed is found and listed first. "tacan channel
    (xx0x) - inc" now finds "TACAN Channel (xx0x) - [Inc]" first (brackets and punctuation do not matter), "master" finds
    every title with "master" (35 in the F-14, also "MASTER RESET" and "Master Test Selector"), "master reset" lists
    "MASTER RESET" first, "reset" finds it too. Before, a short or common word only found the actions JoyPro understood by
    their meaning.
  • DCS actions ending in a tag such as [Inc], [Next], [Toggle] or [CW] were taken as "decrease" in the search, the
    suggestions and the "same function" notes. They now mean what the tag says. A "-" or "+" typed on its own at the
    end of a search ("tacan channel (xx0x) -") is no longer read as "decrease".
  • Add actions: actions already in the open relation are always shown, greyed at the bottom without a tick box, and
    the count says "+ 1 already in this relation". Before, some searches showed them at their place and others not at all.
  • Add actions is fast on big profiles: a search over every game with many results took a second and more per
    keystroke to show (on a 440-relation DCS profile: 0.6-1.7 s, now about 0.1 s); only the rows in view are built now.
  • Switched-off buttons and check boxes are readable in the Light and the Dark theme (the Start page's card of a game
    that is not found, for example); their icons fade with the text.
  • The force feedback page and the telemetry recording settings no longer list games you hid. A hidden game is not
    looked for there either; Settings > Games shows it again.
  • The Check cards' "More" and recommended buttons are as high as the buttons next to them.
  • Texts that were still English in the other languages are translated: merging copied relations, the DCS device
    options, and "Back" in about 25 languages. Serbian (Cyrillic) keeps key names such as Ctrl+Z in Latin letters.
  • DCS: the C-130J's overhead, pedestal and glareshield panels show their labelled faces in the cockpit pictures
    (they were plain grey); the throttle gets its own page. Comes with the next cockpit picture update.
  • Maker photos of devices: 12 more photos work again (VirtualFly Yoko Force Neo and Switcho Radios, PFC yokes and
    rudder pedals: the makers moved them to new addresses).
  • Maker photos of devices: 100 dead photo addresses work again (the same picture at the maker's new address or from
    the web archive).
  • Maker photos of devices: 770 photos (114 before) now have a web archive copy on record that is checked to be exactly
    the photo; when a maker's address stops working, JoyPro shows that copy instead. Comes with the next photo list
    update.
  • Cockpits page: every cockpit photo JoyPro knows (all 40) now has a checked web archive copy, so it still shows when
    its site removes it.
  • The virtual joystick forwarder now runs at below-normal priority, and rests while nothing moves: about 10 checks a
    second instead of the display's refresh rate.
  • The virtual joystick forwarder costs less CPU with sticks that report all the time while nobody touches them (force
    feedback bases, slightly noisy axes): it works at most once per screen refresh instead of up to twice plus on every
    report, reads only the devices that changed and writes the virtual joystick at most once per refresh. A turbo, pulse,
    long press or macro wakes it only when its next step is due. A button still goes out at once, or within one screen
    refresh while another device is streaming.
  • The vJoy device chosen in Settings as the one JoyPro tunnels into is now also the device the virtual joystick writes
    to: the mappin...
Read more

JoyPro2 2.5.0

Choose a tag to compare

@Holdi601 Holdi601 released this 31 Oct 14:35

JoyPro 2.5.0

New

  • The export replaces the binds on your devices by default ("Replace on my devices" with "Also clear my other
    devices"), like JoyPro 1. It touches only the aircraft you export; your keyboard keeps its default keys. A mode you
    picked yourself before stays.
  • The export modes work the same in every game:
    • "Only add" never removes or changes a bind of the game. A bind whose button the game already uses for something
      else is not written; the relation shows a warning and the Check offers to export with "Update", move it to another
      button, or keep it. The warning goes away by itself once the bind reaches the game.
    • "Update, keep the game's binds" writes your binds and removes only a game bind on a button you give another
      action. An action you moved keeps its old button too.
    • "Update, my profile wins" does the same and also takes your actions off their other buttons in that aircraft, so a
      moved action really moves.
    • Both "Update" modes no longer remove binds only because JoyPro wrote them once.
  • The first export to a game this profile never imported from asks once: Import first or export anyway. A backup
    is made either way, and "Undo export" brings every file back.
  • DCS: the import takes every default bind that is active in the game for your devices, also DCS's general joystick
    defaults and the defaults of a connected device without a file yet. "Include defaults" is on by default. The files
    JoyPro writes hold only real differences from DCS's defaults; a default with changed curve, dead zone, saturation or
    invert is written the way DCS writes it.
  • vJoy devices are imported and exported like any other device. Settings names the one vJoy device JoyPro uses
    itself; only that one is left out.
  • Game paths and the list of ignored devices belong to the PC, not to the profile; a profile can keep its own. A path
    you typed is never replaced by the detected one.
  • The import says once per game that changes made in the game come in through "Watch for changes", with a button to
    turn watching on.
  • The Check speaks plain words. Every card says what is wrong with the aircraft, buttons and commands as the game
    names them, what happens in the game, and what to click: the two buttons with their relations, one sentence, a short
    table of aircraft and commands, what caused it (the history entry, for example "Manage with AI" on 21 Oct), one
    recommended fix, "Keep only on ..." / "Keep both" / "More".
  • Errors get fixes like the warnings and their own red icon: "One button does two things" (keep one, keep both, move
    one to another button, switch off) and "One button runs two commands" (keep one command, keep both).
  • Each card has its own "Open ''" per relation: the relation opens with exactly the commands and aircraft of
    the card marked and scrolled into view; Back returns to the card.
  • A command the game's list no longer has is shown with its stored name and where it is, with "Remove" and "Find
    similar".
  • HUD: each stick element can take X, Y and twist from any device's axis. Automatic takes them from the base a
    grip sits on (buttons from the grip, axes from the base).

Changed

  • Opening a profile removes actions of a relation that have no aircraft ticked (one undo step, logged). Suggestions you
    dismissed stay dismissed; relations without a bind always stay.
  • A hidden game is hidden everywhere: also in the game filters of the Relations and Binds pages, the catalog, the
    action search, the suggestions and the HUD. Settings > Games is the one place that shows it again.
  • Problem reports go to Documents\JoyPro2\Problem Reports. Reports in the old folder move there once.
  • The support file also holds your JoyPro 1 profiles (Documents\JoyPro) when you include your profile.
  • The Export page lists the export modes as a clear list of choices, one per line.

Fixed

  • Import your binds from a game and export them again with "Replace on my devices": the game now keeps exactly what it
    had, in every game. IL-2 lost its mouse binds, its Enter key binds and the invert and dead zones of its axes, and a
    throttle set to one side came back centred. Star Citizen switched off the game's own joystick binds and could put
    another stick on js1. Elite Dangerous and Nuclear Option cleared the binds of a device that was not plugged in. MSFS
    lost its menu and map binds.
  • An export never clears a device that is not plugged in, a device on the import's ignore list, mouse binds or binds
    JoyPro cannot read, in any game and any mode. An export no longer changes the keyboard files of aircraft it does not
    export.
  • In games with infantry, ground vehicles or menus (Star Citizen, War Thunder, Arma, Arma Reforger, Wardogs, Hell Let
    Loose, Battlefield) every export mode changes only the flight binds.
  • Keys spelled the JoyPro 1 way (LeftAlt) and the DCS way (LAlt) are the same key. Two modifiers on the same key become
    one, and your binds stay.
  • IL-2: a key shared with a DCS action in one relation (for example Left Alt) is written correctly.
  • The right-click menu of an action in a relation ("Move to another button..." and the others) opens on the whole card,
    not only on its title line. The same on the Binds page.
  • Layout page: a picture you pick ("Photo 4 · Virpil", "Top · Razer", a drawing) is kept at once and no longer falls
    back to JoyPro's line drawing. The markers belong to that picture, and the line above the device list names the model
    and the picture instead of "Placeholder ... (match 30%)".
  • The marker assistant sits in the corner of the picture instead of over its middle, and you can drag it.
  • The Engine Output panel is no longer squeezed: drag the bar above it. JoyPro keeps the height.
  • HUD: a grip without its own X/Y (for example a VKB grip on a VPforce Rhino base) no longer puts the stick element in
    a corner; a missing axis stays in the middle. The HUD costs the game nothing: only what changed is drawn again.
  • An action title shown twice in a row ("Display Select Switch - LEFT [VSD Page]Display Select Switch - LEFT [VSD
    Page]") is shown once everywhere.
  • Aircraft with the seat in their name no longer show it twice ("F-15E Strike Eagle (Pilot)").
  • The Check's "Open both relations" opened only the first relation.

JoyPro2 2.4.3

Choose a tag to compare

@Holdi601 Holdi601 released this 26 Oct 22:45

JoyPro 2.4.3

Fixed

  • Move to another button: when the aircraft already has another action on the new button, the window no longer says
    "No relation uses that button yet". It now names the relation on that button and the action there, and lets you
    choose: swap the two actions, replace the one there, or keep both on the button (both then fire together).

  • Pressing the new button in the Move window no longer makes the relation editor jump to the relation on that button,
    so the window and the editor show the same relation.

  • A button pressed in the Move window is matched to your device as the profile names it, so the action always lands on
    the same device as your other relations.

  • An import from a game right after a change in JoyPro (for example a moved action) no longer drops that change
    without a word. JoyPro says what would be lost ("You changed 2 binds for DCS that are not in DCS yet") and offers
    "Import (drop my changes for DCS)", "Export first" or "Cancel"; Undo or History brings dropped changes back.
    "Do not ask again" switches the question off (Settings > Confirmations switches it on again). With nothing
    unexported there is no question. When a game changes its controls, JoyPro offers only what the game changed, never
    to undo your own changes.

  • The search's match lines name the aircraft as JoyPro does elsewhere ("AH-64D BLK.II", "F-16C bl.50") instead of
    their ids.

New

  • The search on the Relations and Binds pages shows what it found: under each relation the matching actions, with the
    word marked and their game and aircraft (for example "Master Caution Button · DCS World · AH-64D BLK.II (2)"), up to
    three lines and then "+N more". Relations whose action has your whole search come first. Click a line to open the
    relation at that action.
  • Reporting a problem is one step now (Settings > Report a problem > Create Report): the zip holds your text and
    everything needed to find the problem, so you are not asked for more files afterwards: JoyPro's logs of at least the
    last 14 days, the last errors and crash reports, JoyPro's settings and versions, your devices with vJoy and HidHide,
    and per game its folders and JoyPro's backups. With the box "Include my open profile and its history" (on by
    default, remembered) it also holds the open profile, its saved versions and the games' current bind files. JoyPro
    shows what goes in before it saves the zip; your user name and user folder are replaced, also inside the profile
    copy, and the zip stays on your PC until you send it.
  • JoyPro keeps its logs 30 days instead of 7 (at most 200 MB together, the oldest go first), so a report can show what
    happened further back. A number of days you set yourself stays.