Skip to content

Releases

ClawDeck 0.2.0 beta 20

Pre-release

Choose a tag to compare

@IHulkSmashI IHulkSmashI released this 15 Nov 20:55

Autotune fixes from anaveto, and the newest XeSS XMX package.

  • Switching Autotune off now gives the watts back: switching Autotune off in a game, or changing something under
    Advanced, used to leave Autotune's last (lower) TDP on the chip until the game ended. Your pick now goes back at
    once, and your own change stays.
  • Temperature guard: after the chip cooled down, the TDP now comes back up in games Autotune stays out of (xemu,
    or with Autotune switched off). It used to stay at the guard's lower step.
  • xemu: picking a new Autotune target in an xemu game no longer makes Autotune take over the game.
  • "Set PL2 yourself" now reads the value back from the chip. The toast shows the watts, and it says so when the
    chip didn't take the value.
  • Autotune's log (autotune.csv) now has frame times (median, 95th percentile, slow frames) for games whose frame
    rate comes from Steam's overlay. A limit that's only a bit too low shows up there as slow frames even when the fps
    looks full.
  • XeSS XMX package 20261115: lower latency with frame generation. HHHHanasak1 measured Cyberpunk 2077 at 3x going
    from 45 to 32 ms, and CONTROL Resonant at 3x from 53 to 48 ms. Setup → Update XeSS XMX.

Thanks anaveto for all of these!

Update: Setup → Update to 0.2.0 beta 20 (from beta 3 or later). Otherwise Quick Access → Decky → gear →
Developer → Install plugin from URL:
https://github.com/IHulkSmashI/ClawDeck/releases/download/v0.2.0-beta.20/ClawDeck.zip.

Earlier notes: beta 19 (battery and GPU
watts, emulators, temperature guard, diagnostics log), beta 18
(tabs in Quick Access).

ClawDeck 0.2.0 beta 19

Pre-release

Choose a tag to compare

@IHulkSmashI IHulkSmashI released this 15 Nov 04:43

Battery and GPU watts, emulators, the temperature guard and a diagnostics log, all from anaveto.

  • Battery watts: the Claw 8 EX reports its battery current wrongly (about −64 A), and ClawDeck used to divide it
    by 100, which read about 30 % low. It now takes back the real value, so "Battery now" on the Fixes page is right.
  • GPU watts in the overlay: "Show watts in the overlay" now also opens the counter for the graphics part of the
    chip. MangoHud versions with flightlessmango/MangoHud#2211 show it as GPU watts instead of 0.0 W.
  • Emulators: autotune stays out of xemu, which shows 60 fps whatever the game's real speed, so your own limit stays
    on the chip. Games without their own MangoHud log (emulators from ES-DE, for one) now get their frame rate from
    Steam's overlay.
  • Temperature guard: when a couple of busy cores make the chip hot while it's well under its power limit (xemu
    does this), the guard now lowers the CPU's top clock instead of cutting the watts for everything. Watts steps now
    start from what the chip actually draws.
  • Diagnostics log (Setup, off by default): one row a second of power, temperature, battery, clocks and fans, plus
    the controller's reports, so a bug report shows the seconds before a problem. Kept 30 days, at most 200 MB.

Thanks anaveto for all of these!

Update: Setup → Update to 0.2.0 beta 19 (from beta 3 or later). Otherwise Quick Access → Decky → gear →
Developer → Install plugin from URL:
https://github.com/IHulkSmashI/ClawDeck/releases/download/v0.2.0-beta.19/ClawDeck.zip.

Earlier notes: beta 18 (tabs in Quick Access),
beta 17 (fans, autotune and ES-DE, lower frame
generation latency, gyro fix).

ClawDeck 0.2.0 beta 18

Pre-release

Choose a tag to compare

@IHulkSmashI IHulkSmashI released this 14 Nov 20:48

Tabs in Quick Access.

  • Tabs you switch with LB and RB: ClawDeck's Quick Access panel now has four tabs always on screen, Power, Game,
    Fixes and Setup, instead of sections you open and close. LB and RB move between them, like the tabs in Steam's
    Library, and ClawDeck remembers the tab you were on. Thanks Rafalskyy for the idea, and unifideck for showing how
    Steam's own tabs fit in Quick Access.

Update: Setup → Update to 0.2.0 beta 18 (from beta 3 or later). Otherwise Quick Access → Decky → gear →
Developer → Install plugin from URL:
https://github.com/IHulkSmashI/ClawDeck/releases/download/v0.2.0-beta.18/ClawDeck.zip.

Earlier notes: beta 17 (fans, autotune and
ES-DE from anaveto, lower frame generation latency, gyro fix), beta 16
(non-Steam games with their own prefix).

ClawDeck 0.2.0 beta 17

Pre-release

Choose a tag to compare

@IHulkSmashI IHulkSmashI released this 14 Nov 20:17

Fans, autotune and ES-DE from anaveto, lower frame generation latency, and a gyro fix.

  • Lower latency with XeSS frame generation: XeSS XMX package 20261113. HHHHanasak1 reports CONTROL Resonant at 3x
    on the Claw 8 EX's chip going from about 35 ms to about 23 ms. Setup → Update XeSS XMX after updating ClawDeck.
  • Fans (thanks anaveto!): presets now reach the fans exactly (Quiet's 75 % used to land at 74 %, and the panel
    then said the preset didn't apply). A new Extreme preset sits between Cooling and Full speed, and the panel shows
    the curve the fans follow right now.
  • Autotune (thanks anaveto!): MangoHud's frame-time log starts again, so autotune reads the frame rate in games
    without XeSS. It only reads the running game's log, and when it can't get a frame rate it puts your own limit back
    instead of leaving its starting point on the chip.
  • ES-DE (thanks anaveto!): each game you start from ES-DE gets its own power pick and autotune, instead of one
    limit for NES and PS3 alike. Turn it on in Fixes → ES-DE.
  • Smaller things: the PL2 slider says whether it's the plugged-in or battery value, the Game section only shows the
    running game or the one you pick, and the temperature guard logs temperature, power and fan speed to thermal.csv.
  • Gyro on the Claw 8 EX (thanks chris-hmmr for tracking it down!): on newer Bazzite kernels the gyro never came up.
    ClawDeck now puts MSI's sensor-hub firmware into the boot image and adds the rule that loads the gyro program. If you
    installed the gyro before, ClawDeck fixes it by itself: restart once, then shut down fully and turn the Claw on again.
  • Capcom games: REFramework release 19 of onehoon's fork. Press Install again on the game's page to get it.

Update: Setup → Update to 0.2.0 beta 17 (from beta 3 or later). Otherwise Quick Access → Decky → gear →
Developer → Install plugin from URL:
https://github.com/IHulkSmashI/ClawDeck/releases/download/v0.2.0-beta.17/ClawDeck.zip.

Earlier notes: beta 16 (non-Steam games with
their own prefix, Capcom games without DLSS), beta 15
(VRR fix on CachyOS + Limine).

ClawDeck 0.2.0 beta 16

Pre-release

Choose a tag to compare

@IHulkSmashI IHulkSmashI released this 12 Nov 00:18

Non-Steam games with their own Proton prefix, and the older Capcom games.

  • Non-Steam games with a custom prefix: when a shortcut's launch options send Proton to its own prefix
    (STEAM_COMPAT_DATA_PATH=...), ClawDeck now always uses that one. Steam creates an empty compatdata folder for the
    shortcut at its first launch, and ClawDeck looked there instead, so the Game page said the XMX cores were never used
    and the health check looked in the wrong place. XeSS on XMX itself kept working. A path starting with ~ or $HOME
    works too (thanks maltyjava for tracking it down!).
  • Capcom games without DLSS: Resident Evil 2, 3, 4 (2023), 7 and Village, Devil May Cry 5 and Street Fighter 6
    have no DLSS in the game, so ClawDeck's Capcom setup (it swaps the game's DLSS and DLSS frame generation for XeSS
    on the XMX cores) had nothing to work with there: RE4 ran as if nothing was installed. ClawDeck no longer installs
    it in these games and the Game page says why; Uninstall OptiScaler takes out a setup from an earlier beta.
    Proper support for them, through REFramework's pd-upscaler build, comes once it's tested on a Claw (thanks
    Kisenir!).

Update: Setup → Update to 0.2.0 beta 16 (from beta 3 or later). Otherwise Quick Access → Decky → gear →
Developer → Install plugin from URL:
https://github.com/IHulkSmashI/ClawDeck/releases/download/v0.2.0-beta.16/ClawDeck.zip.

Earlier notes: beta 15 (VRR fix on CachyOS +
Limine), beta 14 (non-Steam games, XeSS XMX
package 20261111).

ClawDeck 0.2.0 beta 15

Pre-release

Choose a tag to compare

@IHulkSmashI IHulkSmashI released this 10 Nov 23:51

The VRR fix works on CachyOS with Limine.

  • VRR fix on CachyOS + Limine: Limine reads its boot settings line by line, so the label ClawDeck put after its
    setting ended up on the kernel command line and the fix never took ("started with the fix, but the driver still
    reports 48-120"). The label now goes on its own line. If you already installed the fix, ClawDeck repairs the line by
    itself when it starts: one restart and you're on 30–120 Hz (thanks maltyjava for finding it, and Rafalskyy for the
    report!).

Update: Setup → Update to 0.2.0 beta 15 (from beta 3 or later). Otherwise Quick Access → Decky → gear →
Developer → Install plugin from URL:
https://github.com/IHulkSmashI/ClawDeck/releases/download/v0.2.0-beta.15/ClawDeck.zip.

Earlier notes: beta 14 (non-Steam games, XeSS
XMX package 20261111, VRR fix help), beta 13.

ClawDeck 0.2.0 beta 14

Pre-release

Choose a tag to compare

@IHulkSmashI IHulkSmashI released this 10 Nov 22:45

Non-Steam games, the newest XeSS XMX package, and VRR fix help.

  • Non-Steam games: Windows games you added to Steam yourself and run through Proton now show in the Game list,
    with their own prefix when the shortcut sets STEAM_COMPAT_DATA_PATH, and with their icon (thanks maltyjava for
    the report and the design, tested with nine games on a Claw 8 AI+ with CachyOS!).
  • Gothic 1 Remake and other Unreal games with a launcher stub: OptiScaler now goes next to the real game exe in
    Binaries/Win64, not next to the small launcher of the same name (thanks chris-hmmr!). Press Install again on
    the game's page to move it.
  • XeSS XMX package 20261111: Mesa 26.3.0. On the Claw 8 EX it now runs XeSS on the XMX cores through Mesa's
    regular driver plus a small Vulkan layer, instead of a patched driver; the Claw 8 AI+ keeps the patched one.
    Setup → Update XeSS XMX after updating ClawDeck.
  • VRR fix: some panels flicker or stutter at 30 Hz (below MSI's official 48 Hz floor). The Fixes page and the
    README now say so: if yours does, remove the fix and keep VRR on, it still works from 48 Hz. When the fix doesn't
    take at boot, the Fixes page now shows the kernel's own reason, and the bug report has a VRR section.

Update: Setup → Update to 0.2.0 beta 14 (from beta 3 or later). Otherwise Quick Access → Decky → gear →
Developer → Install plugin from URL:
https://github.com/IHulkSmashI/ClawDeck/releases/download/v0.2.0-beta.14/ClawDeck.zip.

Earlier notes: beta 13 (XeSS XMX package
20261107, REFramework release 18), beta 12 (XeSS
through OptiScaler on the XMX cores).

ClawDeck 0.2.0 beta 13

Pre-release

Choose a tag to compare

@IHulkSmashI IHulkSmashI released this 09 Nov 18:39

The newest XeSS XMX package and REFramework build.

  • XeSS XMX package 20261107 (from 20261104): sturdier driver, XMX helper and Proton hook; missing XMX programs
    now compile in the background instead of waiting on the first frame; a Cyberpunk 2077 crash fixed on Mesa 26.3;
    the driver check at log-in falls back to the stock driver safely if the package folder is ever moved.
    Setup → Update XeSS XMX after updating ClawDeck.
  • REFramework (Capcom games) release 18 of onehoon's fork, the build OptiClick's Capcom setup uses (from release
    15): bug fixes from REFramework itself for script loading and hook handling. On a game you already set up, press
    Install again on its Game page to get the new build.

Update: Setup → Update to 0.2.0 beta 13 (from beta 3 or later). Otherwise Quick Access → Decky → gear →
Developer → Install plugin from URL:
https://github.com/IHulkSmashI/ClawDeck/releases/download/v0.2.0-beta.13/ClawDeck.zip.

Earlier notes: beta 12 (XeSS through
OptiScaler on the XMX cores, debug logs, The Witcher 3), beta 11 (Unreal games in the Game list).

ClawDeck 0.2.0 beta 12

Pre-release

Choose a tag to compare

@IHulkSmashI IHulkSmashI released this 09 Nov 16:56

XeSS through OptiScaler reaches the XMX cores again, and a one-tap debug log for when it doesn't.

  • XeSS 2 on the XMX cores: OptiScaler loads XeSS when the game starts, and Proton 11.0 then reported the Claw's
    GPU to XeSS as an AMD one, so XeSS took its slower DP4a path instead of the XMX cores. Every game with XeSS 2
    through OptiScaler now shows XeSS the Intel GPU, with or without frame generation. Existing games pick it up by
    themselves (thanks quarter24am for the logs from Tainted Grail on the Claw 8 AI+!).
  • Debug logs for the next launch: Per-game → Something not working? turns on Proton's log, the XMX driver's
    messages and OptiScaler's log for one launch. Play a minute, quit, then Setup → Save a bug report: the report
    shows where things stopped. The next launch is normal again.
  • The Witcher 3 and DLSS: since its 5.0 update the game turns DLSS off when it runs under Proton, before
    OptiScaler sees it. The Game page now says so: pick XeSS in the game's menu, or run it with GE-Proton 11-9 or newer.

Update: Setup → Update to 0.2.0 beta 12 (from beta 3 or later). Otherwise Quick Access → Decky → gear →
Developer → Install plugin from URL:
https://github.com/IHulkSmashI/ClawDeck/releases/download/v0.2.0-beta.12/ClawDeck.zip.

Earlier notes: beta 11 (Unreal games in the
Game list), beta 10 (The Witcher 3 DLSS).

ClawDeck 0.2.0 beta 11

Pre-release

Choose a tag to compare

@IHulkSmashI IHulkSmashI released this 09 Nov 04:07

Unreal Engine games show up in the Game list again.

  • Missing games: ClawDeck lists the games where it finds DLSS, FSR or XeSS, and it only looked 6 folders deep.
    Unreal Engine games keep those files 7 to 8 folders down (Engine/Plugins/.../Binaries/ThirdParty/Win64), so an
    Unreal game that isn't in ClawDeck's own game list didn't show up at all (thanks for the Mortal Shell 2 and
    The Blood of Dawnwalker report!). It now looks 9 folders deep, and every game is checked again once after the update.
  • XeSS on the XMX cores: the same shallow search was in the launch-time check for a game's own XeSS, so an Unreal
    game's XeSS could miss the XMX cores. Fixed too.

A game that still doesn't show up has its upscaler built into the game itself, where OptiScaler can't reach it. The
full Game page lists those by name.

Update: Setup → Update to 0.2.0 beta 11 (from beta 3 or later). Otherwise Quick Access → Decky → gear →
Developer → Install plugin from URL:
https://github.com/IHulkSmashI/ClawDeck/releases/download/v0.2.0-beta.11/ClawDeck.zip.

Earlier notes: beta 10 (The Witcher 3 DLSS),
beta 9 (gyro on the Claw 8 EX).