Skip to content

IPRO SDK V2.2.0

Choose a tag to compare

@RexhuangTW RexhuangTW released this 03 Nov 05:24
· 4 commits to main since this release

IPRO7 / IPRO7AI and IPRO6S release. The step-by-step reference board is the IPRO7AI Reef EVK V4.0.

Highlights:

  • IPRO6S applications are back: ipro6_demo (Wi-Fi 6 station and soft-AP, DTIM low power, Wi-Fi memory profiles PERF / BALANCED / APP), ipro6_if_wifi (Wi-Fi bridge to a host over SDIO or USB; built with defconfig_ipro6_sdio it is the firmware of the Reef's IPRO6S FIN card) and ipro6_fmac (FullMAC firmware and its flash loader). The Wi-Fi MAC, host layer and RF libraries are prebuilt once per shipped defconfig_*.
  • IPRO Edge AI platform V2.0 in components/ai, and ai/ipro_reef_teach: one Reef firmware with the image, voice and sensor Teach tools, picked at boot and driven from IPRO AI Studio, which ships in the separate IPRO Edge AI package. tools/teach_web/ is a browser version of image Teach.
  • hal_reboot_full() resets the whole chip through the AON watchdog; ipro_reef_teach switches tools with it (0 hangs in 375 switches on a Reef with a camera). With CONFIG_APP_WATCHDOG, platform_init() arms the watchdog from the start of the boot.
  • New multimedia/ipro7_jpeg_decode: JPEG to RGB565 / RGB888 in software (TJpgDec), including camera MJPEG frames without Huffman tables. ipro7ai_reef_demo adds mic usb (the Reef as a USB microphone) and mic sdrec (WAV recording to the SD card).
  • The IPRO7 Bluetooth controller archives are rebuilt from this release's source.
  • USB device: RX FIFO overflow fixed, detach on de-init, CDC-ECM framing, the USB console attaches reliably. lwIP: sys_mbox_trypost from an interrupt takes the FromISR path. BSP: PLL-off system clocks for BLE-only applications, hal_lp_enter_fastboot(), security engine HAL v2 with a PSA accelerator driver.
  • The README walks through the IPRO7AI Reef EVK V4.0 step by step: host setup, the U6 console, build, download mode, flashing, the console, IPRO AI Teach, a first application of your own and how to test it. Sample applications carry no built-in network credentials.

Scope:

  • 40 FreeRTOS applications. The README's "Applications for the Reef EVK" lists the eleven Reef builds; the other applications target other INTELPRO boards and are listed with the board they need.
  • IPRO6S applications in this release are Wi-Fi applications.
  • ipro_agora_sentino needs the AOSL core, a git submodule here: components/3rdparty/agora/aosl -> https://github.com/AgoraIO-Community/aosl at d825607. Run git submodule update --init components/3rdparty/agora/aosl, or with the release archive clone it there and check out d825607. A Sentino device triple and the FIN-card firmware image are obtained separately - see the app's README.
  • Zephyr boards: ipro7_evb and ipro7ai_evk. Not available under Zephyr yet: low-power modes, and drivers for display, camera, audio codec, USB, SD host, Ethernet and NPU.
  • Not included: Matter, Thread for FreeRTOS applications (Thread is available under Zephyr), model conversion tools.

Third-party: the Agora RTC SDK (components/3rdparty/agora/sdk) is redistributed with Agora's permission and is subject to the Agora Terms of Service (https://www.agora.io/en/terms-of-service/) - see components/3rdparty/agora/sdk/LICENSE. The IPRO7 port of AOSL is under the AOSL license in components/3rdparty/agora/port, with the further permissions Agora granted in that LICENSE file (Powered by AOSL). The AOSL core is not part of the SDK.

Validation:

  • The package's own build check: 36 FreeRTOS applications build from this package (ipro_agora_sentino once AOSL is fetched), every shipped IPRO6S defconfig (7) builds, and the Zephyr sample matrix (tools/zephyr/ci_build.sh) and twister --build-only over zephyr/samples and zephyr/tests build for ipro7_evb and ipro7ai_evk.
  • On an IPRO7AI Reef EVK V4.0, built from this package: ipro7ai_reef_demo passed reef selftest; the README's first application passed its self-test through build_freertos.sh test (exit 0); ipro_ble_remote (defconfig_reef, boot2 and the A/B partition table) started and advertised.
  • BLE connection on the same Reef: a Mac (macOS, CoreBluetooth) as central connected to ipro_ble_remote three times in a row. Each time it discovered all eight GATT services and their characteristics, the MTU exchange reached 247 bytes and the connection parameter update completed; after each disconnect the board advertised again, with no reset.

Documentation: https://intelpro-inc.github.io/ipro-sdk-docs/