IntelProCube 0.7.0.1 (Windows, macOS, Linux)

IntelProCube 0.7.0.1 for IPRO6 and IPRO7, for Windows x64, macOS (Apple silicon, macOS 11 or later) and Linux x86-64. It fixes flashing for IPRO6S.

What changed

• IPRO6: the IPRO6 boot header template (chips/ipro6/efuse_bootheader/efuse_bootheader_cfg.conf) now uses the correct flash clock. With 0.7.0, IPRO6S parts with the 2 MB in-package flash, such as the one on the IPRO6S EVK, were flashed and verified ([All Success]) but did not boot: the chip stayed in download mode.
• Nothing else changed. The programs are the 0.7.0 builds, and IPRO7 flashing is the same as in 0.7.0. Apart from that template, only README.txt and RELEASE_INFO.txt differ from 0.7.0.

Upgrading from 0.7.0

Extract 0.7.0.1 to a new folder. If you extract it over a 0.7.0 folder you have already used, delete chips/ipro6/img_create_iot/efuse_bootheader_cfg.ini once: the tool creates that file from the template on its first run and does not update it afterwards.

IPRO SDK Online Setup 3.6.0 and earlier install 0.7.0. To flash an IPRO6S on such an installation, install 0.7.0.1 into a new folder.

Verified on an IPRO6S EVK through an IPRO Debug Probe on macOS, with ipro6_demo (defconfig_ipro6_lpwifi) from IPRO SDK V2.2.0, using a fresh copy of the macOS package:

• Without boot2 (partition_cfg_fw_direct.toml), flashed with the 0.7.0.1 package: 10 of 10 hardware resets booted to the shell, and stack_wifi and wifi_scan listed the nearby access points.
• With boot2 v0.6.0 (partition_cfg_2M.toml), flashed with the same template change applied to the 0.7.0 package: 12 of 12 resets booted through boot2 to the shell.
• Before the fix, the same board, image and commands with 0.7.0 ended in [All Success] and the chip stayed in download mode.

Flashing steps for IPRO6S: IPRO6S. Install steps for each system: see the README.

Package	Size	SHA-256
IntelProCube-0.7.0.1-windows.zip	174 MB	4b4b981705e834af8c738dd92b9b671aa3559e09ae4001289dd58aed23a4d353
IntelProCube-0.7.0.1-macos-arm64.tar.gz	114 MB	c3a8bf7eca2a48c3f9bf40c3241ddf6aec5155688f2a92f40a84cc47f7633bc4
IntelProCube-0.7.0.1-linux-x64.tar.gz	128 MB	efc5765ca402d0af00b42489dd61a74481531875b871517af5c0bca9d7387df9

The hashes are also in SHA256SUMS.txt.

• macOS and Linux packages are .tar.gz so the programs keep their execute permission.
• macOS: if you download with a browser, run xattr -d com.apple.quarantine <file> before extracting.

IntelProCube 0.7.0 (Windows, macOS, Linux)

IntelProCube 0.7.0 (build 2026-08-27) for IPRO6 and IPRO7, for Windows x64, macOS (Apple silicon, macOS 11 or later) and Linux x86-64. The three packages come from the same build: apart from the programs for each system, their files are identical.

Package	Size	SHA-256
IntelProCube-0.7.0-windows.zip	174 MB	29c55ca8c1469433d4c06b344091a2e747a1bf39c7b7123067cf6dc0ddcfa4e0
IntelProCube-0.7.0-macos-arm64.tar.gz	115 MB	b78a99dc84f807cc5ae41589692f9b697fdb1aa3dcbb1d4690d8eb06341f55e7
IntelProCube-0.7.0-linux-x64.tar.gz	128 MB	38dccf755645d0dba8c0cfd73512b43360f69f4d39c5872832d51f6f02c1828c

The hashes are also in SHA256SUMS.txt.

• The Windows file is the same as the one in components-2026.09.09.
• macOS and Linux packages are .tar.gz so the programs keep their execute permission.
• macOS: if you download with a browser, run xattr -d com.apple.quarantine <file> before extracting.

Install steps for each system: see the README.