Repository navigation
Releases
ProCam v1.4.0-beta.7
Install on the Jolla Phone 2 (Sailfish OS 5.1, aarch64):
devel-su pkcon install-local procam-1.4.0.beta.7-1.aarch64.rpm
SHA-256 checksums are in SHA256SUMS.
What's new in ProCam 1.4.0-beta.7
QR codes
- Point the camera at a QR code and its link (or text) appears in a chip under it. Tap the chip to open the link in the browser; other text is shown with a Copy button. Nothing opens without that tap.
- On by default: "Detect QR codes" in Settings → Apps → ProCam.
Document scanning
- Hold the phone over a page, receipt or card with the camera pointing down, and the viewfinder outlines it. Tap the outline (or the "Scan document" chip) to save a flat, straightened photo of just the document. The photo keeps its details, such as the date and location.
- Documents are only looked for while the camera points down, so windows, doors and pictures on a wall aren't outlined in everyday photos.
- On by default: "Detect documents" in Settings → Apps → ProCam.
Night photos
- Brighter night photos. Night mode now brightens dark scenes up to 8× the metered exposure (was 3×). In near darkness it brightens less, so the scene stays dark instead of turning into grain.
- Cleaner shadows. An extra light cleanup removes the fine grain left in brightened shadows, such as dark walls and the sky.
- No more noisy square around small lights. A lamp, a display or a street light in a dark scene no longer leaves a square of coloured grain around it.
- Tripod and table shots. In night mode the gyroscope measures how steady the phone is. When it has been still for a second and nothing moves in the frame, ProCam takes fewer, longer frames (up to 1 s each, about 10 s in all) at a much lower ISO.
- Longer hand-held frames. Held steady, night frames can now be up to 1/3 s (was 1/5 s).
Learned denoise
- On by default and no longer experimental. If you turned it off, it stays off.
- New model, trained on 78 bursts instead of 52, including night scenes with small bright lights.
- Knows where the merge had less to work with. Where moving subjects or flickering lights left fewer frames to combine, it now cleans harder.
- Single-frame photos (such as flash photos) use it only up to ISO 150; above that the standard filter does better.
HDR photos
- No more bright halo around trees against fog or an overcast sky, or between bare branches.
Video
- New "Bitrate" option in the video menu: the full rate, ½, ¼ or ⅛, with the size per minute shown. Lower rates make smaller clips for sharing.
Files
- New file names: photos and videos are named like
20261120_153012.jpginstead ofProCam_20261120_153012.jpg. Many photo tools and scripts read the date from this format. Older photos keep their names and still sort correctly in ProCam. - New "Save photo details" option in Settings → Apps → ProCam (on by default). Turn it off and ProCam no longer keeps a
.jsonfile with the capture details next to each photo. Photos keep their EXIF either way, and "RAW + JSON" files keep their.json. - Single-frame RAW photos no longer leave temporary
.warm.raw16and.warm.jsonfiles next to the photo.
Xperia 10 III and other phones
- Cameras that can run faster than 30 frames per second now take photos at 30 fps from the start, instead of only after damaged RAW frames appeared. On the Xperia 10 III this keeps RAW frames intact and burst exposures on time. The Jolla Phone 2 is unchanged.
- If RAW frames are damaged even at 30 fps, the camera switches to YUV photos right away instead of retrying.
Full Changelog: v1.4.0-beta.6...v1.4.0-beta.7
ProCam v1.4.0-beta.6
Install on the Jolla Phone 2 (Sailfish OS 5.1, aarch64):
devel-su pkcon install-local procam-1.4.0.beta.6-1.aarch64.rpm
SHA-256 checksums are in SHA256SUMS.
What's new in ProCam 1.4.0-beta.6
HEIC photos
- New "Photo format" option in Settings → Apps → ProCam: JPEG (the default) or HEIC. HEIC photos are made by the phone's hardware encoder and take about a third less space than JPEG at the same quality.
- In RAW mode the RAW file is kept next to the photo, which is then saved in the format you chose. The Pro top bar shows RAW, JPG or HEIC.
- Every HEIC keeps the photo's details: when it was taken (with time zone), where (when "Save location" is on), its size and orientation, and the camera and exposure settings. If a HEIC can't be saved with them, the photo stays a JPEG and ProCam tells you.
- ProCam installs a HEIC image plugin, since Sailfish OS has none, and a rule that tells the photo indexer that HEIC files are pictures.
Pro mode, redesigned
- Pro keeps Auto's controls (last photo, shutter, lens) and adds one row of chips above them: EV, shutter, ISO and focus. A chip lights up while you set it by hand. Tap it to open its dial.
- The focus dial goes from AF and continuous AF through manual distances to infinity. Peaking and zebra are at the start of the dial.
- RAW/JPG is a chip in the top bar, and the histogram is a small card under it. Pro now covers about a fifth of the screen instead of 40%.
- In JPEG mode the photo size picker offers the sizes ProCam really renders.
Flash and torch
- Flash chip in the top bar: off (the default), auto or on, on cameras with a flash. A flash photo is a single frame, never an HDR burst. Night mode never flashes.
- Torch chip in video. You can turn it on and off while recording.
Zoom
- 2x is really 2x. Zoomed photos and the viewfinder were cropped twice, so 2x looked like 4x. Zoom presets are now 1x, 2x and 4x.
Focus
- Tap to lock focus. A tap on the photo viewfinder locks focus there until you tap the "AF locked" chip. In video, where a tap sets brightness, a long press locks focus, and the lock stays while recording.
- Sharper photos after a tap, especially at night. ProCam now waits (up to 2 s) for the camera to finish focusing before it takes the photo. Before, a photo taken right after a tap could freeze the lens mid-focus and come out soft, and later photos kept that wrong focus.
Learned denoise (experimental)
- New "Learned denoise" option, off by default. The noisiest HDR and night photos are cleaned up by a small neural network on the phone's graphics processor instead of the standard noise filter. It keeps more texture in dim light and adds about half a second per photo. Brighter photos keep the standard filter.
Photo details
- Photo viewers now show the right focal length (some showed "-0.0 mm") and exposure times like 1/15 s. Photos are marked as sRGB, and "Software" names the real ProCam version. This applies to JPEG and HEIC.
Xperia 10 III and other phones
- YUV photos are no longer hazy. These are photos from the front and ultra-wide cameras, and from cameras whose RAW is damaged. ProCam now measures how the camera brightens its frames and combines them the same way. A first frame taken at the wrong exposure is left out.
- Another try before giving up on RAW. When a camera's RAW frames come out damaged, ProCam first retries RAW with the viewfinder limited to 30 frames per second. The likely cause on the Xperia 10 III is a fast, reduced-resolution sensor mode. Only if RAW is still damaged does that camera switch to YUV photos.
- Damaged RAW frames are kept for troubleshooting, even with RAW saving off. They're saved as
ProCam_<time>_damaged.raw16with a.jsonnext to your photos. - New "Keep trying RAW" option for testers: a camera with damaged RAW stays with RAW instead of switching to YUV photos.
Known limitations
-
The Gallery app doesn't read the date of HEIC photos yet, so it may list them out of order or not show them. Choose JPEG if you rely on the Gallery. A fix is planned.
-
Learned denoise rarely kicks in for night photos: 16-frame night photos are usually clean enough for the standard filter.
-
Not yet confirmed on a phone:
- the focus fix after a tap;
- learned denoise on a real photo in the app;
- the photo details in HEIC photos with location on;
- on the Xperia 10 III, the RAW retry at 30 fps and "Keep trying RAW".
Reports are welcome.
-
In very dark scenes the camera can still report focus as found when it isn't. If a night photo comes out soft, tap to focus first.
-
In low light, the front camera's viewfinder lags behind by up to half a second. This comes from keeping full-resolution selfie frames ready for the photo, and it's kept on purpose for image quality.
Full Changelog: v1.4.0-beta.5...v1.4.0-beta.6
ProCam v1.4.0-beta.5
Install on the Jolla Phone 2 (Sailfish OS 5.1, aarch64):
devel-su pkcon install-local procam-1.4.0.beta.5-1.aarch64.rpm
SHA-256 checksums are in SHA256SUMS.
What's new in ProCam 1.4.0-beta.5
Faster
- Starts about a second sooner. The camera now opens while the app is still loading, and ProCam remembers what your cameras can do instead of checking them at every start. On the Jolla Phone 2 the viewfinder appears after about 1.5 s instead of 2.5–2.8 s.
- Shutter feedback right when the photo is taken. The shutter sound and animation now come as soon as the last frame of the photo has been captured, instead of after the frames were saved. They tell you when it's safe to move the phone: indoors that's typically 0.7–0.9 s after you press.
- Turning the phone no longer restarts the camera. The photo's orientation is applied when it's saved.
- The shutter animation runs smoothly: the photo's thumbnail is made after it has started.
Sharper viewfinder
- The viewfinder now shows 1920x1440 instead of 1440x1080. A camera that can't deliver that next to its RAW stream switches back to 1440x1080 by itself.
Selfies
- New mirror button in the front camera's top bar. When it's on, selfies are saved the way the viewfinder shows them (mirrored). When it's off (the default), they're saved the way others see you.
Choose where photos and videos are saved
- New "Photos folder" and "Videos folder" options in Settings → Apps → ProCam. Choose "Default" or pick any folder in Pictures, Videos or on a memory card. Photos and videos go straight into the folder you pick, and ProCam's gallery follows it.
- If the folder you picked isn't available (memory card taken out, folder deleted), ProCam saves to the default folder instead,
Pictures/ProCamorVideos/ProCam, and Settings tells you. - Folders elsewhere, such as Documents, can't be used: the Sailfish OS app sandbox only lets ProCam write to Pictures, Videos and memory cards. To use a new folder, create it in the File Browser first.
Better photos on other phones
- Damaged RAW frames are detected. On some phones, the camera fills only part of each RAW frame. On the Xperia 10 III this made photos come out as two squashed copies on black. ProCam now checks every frame before merging and leaves damaged frames out.
- Automatic switch to YUV. If every frame of a photo is damaged, that photo fails with a message saying so. That camera then takes its photos from YUV frames, like cameras without RAW, and its RAW options are hidden. Please take the photo again. ProCam remembers this until the next system update, which may fix the camera.
- Photos on the Jolla Phone 2 are unchanged: none of its RAW frames are affected.
Diagnostics
Pictures/ProCam/procam-capture.lognow records start-up, shutter and photo-processing times, and when a camera's RAW frames were found damaged.
Known limitations
- In low light, the front camera's viewfinder lags behind by up to half a second. This comes from keeping full-resolution selfie frames ready for the photo, and it's kept on purpose for image quality.
- The Xperia 10 III switch to YUV photos hasn't been confirmed on an Xperia yet. Reports are welcome.
- Video: no zoom in the Video tab, no tap-to-focus while recording, and 30 fps only. The Jolla Phone 2's camera driver has no 60 fps mode.
Full Changelog: v1.4.0-beta.4...v1.4.0-beta.5
ProCam v1.4.0-beta.4
Install on the Jolla Phone 2 (Sailfish OS 5.1, aarch64):
devel-su pkcon install-local procam-1.4.0.beta.4-1.aarch64.rpm
SHA-256 checksums are in SHA256SUMS.
What's new in ProCam 1.4.0-beta.4
Video: ProCam's own recorder
- New video recorder, on by default. Video is now recorded through ProCam's own camera session instead of the system camera service.
- Stabilization out of the box. Electronic stabilization works without any system configuration file. A new button in the Video tab's top bar turns it on or off (on by default). The viewfinder shows exactly the stabilised frame that is recorded.
- Sharper, cleaner video. The camera's own video noise reduction and sharpening are used, and the encoder records at a constant bitrate with its higher-quality profile, so busy or dim scenes no longer turn blocky and grainy.
- Choose the size and codec in the Video tab's menu:
- Size: 1080p or 1440p (2560x1440) at 30 fps. ProCam offers only the sizes both the camera and the phone's video encoder support. On the Jolla Phone 2 that tops out at 1440p, so there is no 4K. Phones with a 4K encoder get a 4K option.
- Codec: H.264 (plays everywhere) or HEVC (smaller files).
- Instant start and stop. Recording starts without the viewfinder blinking, and stopping waits until the last frames are in the file.
- Recordings are never lost. If you leave the app while recording, the recording keeps going and stops after a minute. If the camera has to close mid-recording, the file is still finished properly.
- 16:9 viewfinder in the Video tab.
- Sound is recorded in sync with the picture. The microphone is only open while you record.
- Videos are saved to
Videos/ProCam. - Fallback. If a phone's camera can't run the new recorder, ProCam switches to the system recorder for that camera automatically. You can also turn the new recorder off in Settings → Apps → ProCam → "ProCam video recorder".
- With the system recorder, the video menu keeps its old entries. If your system configures stabilization for it, that now also applies when ProCam starts directly in the Video tab.
Photos
- HDR and night bursts drop frames whose exposure differs from what was asked for. Some phones (Xperia 10 III) deliver the first frames of a burst with the viewfinder's exposure, which made merged photos uneven. Photos on the Jolla Phone 2 are unchanged.
- If HDR or night bursts fail on a camera, ProCam takes normal photos with that camera for the rest of the session instead of failing every shot.
- Clear message when the photo folder can't be written: "Cannot write to folder …" instead of a failed capture.
Diagnostics
- More detail in
Pictures/ProCam/procam-capture.logwhen a capture or a recording fails. Every recording is logged with its size, codec, frame rate and bitrate. - The camera probe lists each camera's stabilization modes.
Known limitations
- No zoom in the Video tab yet.
- Video uses continuous autofocus; tap-to-focus is not available while recording.
- Video is 30 fps only.
Full Changelog: v1.4.0-beta.3...v1.4.0-beta.4
ProCam v1.4.0-beta.3
Install on the Jolla Phone 2 (Sailfish OS 5.1, aarch64):
devel-su pkcon install-local procam-1.4.0.beta.3-1.aarch64.rpm
SHA-256 checksums are in SHA256SUMS.
Full Changelog: v1.4.0-beta.2...v1.4.0-beta.3
ProCam v1.4.0-beta.2
Install on the Jolla Phone 2 (Sailfish OS 5.1, aarch64):
devel-su pkcon install-local procam-1.4.0.beta.2-1.aarch64.rpm
SHA-256 checksums are in SHA256SUMS.
Full Changelog: v1.4.0-beta.1...v1.4.0-beta.2
ProCam v1.4.0-beta.1
Install on the Jolla Phone 2 (Sailfish OS 5.1, aarch64):
devel-su pkcon install-local procam-1.4.0.beta.1-1.aarch64.rpm
SHA-256 checksums are in SHA256SUMS.
Full Changelog: https://github.com/IvanVojtko/PROCam/commits/v1.4.0-beta.1