v2.3.0

• New Diagnostics view next to Tuning, Presets and Games, with the tabs Axes, Buttons and LEDs. The main menu is tidier again
• Axes: every axis of the wheel and the pedals with its raw and normalized value, the range the device reports, the range seen since the last reset, flat, fuzz and resolution
• Health check on the Axes tab for the steering and the pedals with a role: a tile turns green once the axis was moved through its range, and orange for a possible fault – a pedal that never reaches full travel, doesn't come back to 0 % or jitters at rest, or a wheel that moves while it should be let go
• Report a Problem adds the results of the health check, if it was run, so a report shows whether the pedals and the steering measure cleanly. It can be switched off there
• Buttons: every button as a numbered cell, lit while held and green once pressed, with its name, code and the number games see (SDL)
• LEDs: switch the rev and flag LEDs one by one, show the colours of RGB LEDs and run a short test that can be stopped at any time. When you leave the tab, the LEDs are set back as they were
• Preferences → Wheelbase shows the device details: name, USB vendor and product ID and the kernel driver, with a button to copy them for a GitHub issue. Problem reports include them too, and name the build of hid-fanatecff, which tells drivers built from git apart
• Pedal axes are hidden with an eye button instead of a role, and keep their role while hidden
• Fixed: a click anywhere on a row with a switch turned the setting on or off; now only the switch does

Full Changelog: v2.2.0...v2.3.0