Repository navigation
Releases
HybridSliceCraft 0.17.0
HybridSliceCraft 0.17.0 adds Z contouring for smoother curved and sloped tops.
New
- Z contouring (also called Z anti-aliasing), in Print settings → Quality → Surface (shown with Advanced). Every layer leaves a small step on a slope or a curve. With Z contouring the nozzle moves up and down within a layer, so the top-surface lines, ironing and the walls just under the top follow the model's real surface. Domes, chamfers, rounded edges and gentle slopes come out smoother; the rest of the print keeps its layer height.
- Lowest contour height (default 0.05 mm): the thinnest a contoured line may get.
- Lower walls steeper than (default 35°): walls on steeper surfaces are lowered so their outer edge meets the slope.
- Keep fill direction: solid and top lines run the same way on every layer.
- A contoured line gets the plastic for its own thickness, and the preview shows it at the height it is printed.
- Only surfaces that face up gain; the first layer and spiral vase stay flat. It is off by default, and with it off the printer instructions are exactly as before.
- Importing OrcaSlicer print profiles reads their Z contouring settings.
- For AI agents (MCP): the new settings are explained in
describe_settings, andslice_filamentreports how many lines were contoured.
None of the saved files have been tried on a real printer yet. Check a small print first.
HybridSliceCraft 0.16.0
HybridSliceCraft 0.16.0 makes cutting more flexible, lets you merge models, and checks for updates.
New
- Check for updates (#78). Help → Check for updates… finds the newest release. The AppImage replaces itself, Windows starts the new installer, macOS opens the new disk image; the
.deband Flatpak show how to update. The program also looks once at start, quietly, and tells you only when there is something new; you can turn that off. It asks GitHub for the newest release and sends nothing else. - Merge into one (#84). Edit → Merge into one joins the selected models into one, right where they are. Paint and supports come along; Split into parts takes it apart again.
- Save selection as STL (#84). File → Save selection as STL… saves only the selected models, as one file.
Changes
- The cut tool (#85) cuts across X, Y or Z, at any position, and cuts several selected models at once. It no longer re-arranges the plate: only the pieces move. Lay the cut faces on the plate and Find room for the pieces can each be turned off; then the pieces stay where the model was, just apart. The upper half of a horizontal cut now stays upright instead of being turned upside down.
Updating from inside the program starts with this version, so this one more update is by hand.
None of the saved files have been tried on a real printer yet. Check a small print first.
HybridSliceCraft 0.15.0
HybridSliceCraft 0.15.0 follows the system's theme and makes the AppImage updatable.
Changes
- The theme follows the system. The new choice Follow system in View → Theme is the default: the program starts light, and dark when the system is set to dark mode. Dark and Light are still there, and a theme you picked before is kept.
- The AppImage can update itself. It now says where its updates come from, and each release has a
.zsyncfile next to it. AppImageUpdate (or a tool like it) then downloads only what changed.
None of the saved files have been tried on a real printer yet. Check a small print first.
HybridSliceCraft 0.14.2
HybridSliceCraft 0.14.2 fixes the AppImage.
Fix
- The AppImage did not start on systems without libxkbcommon-x11 ("Library libxkbcommon-x11.so could not be loaded"). The window code loads this and a few other X11 libraries by itself, so they were not packed. They are now inside the AppImage, and every release starts the AppImage the way the AppImage catalogue tests it. The program itself is the same as 0.14.0.
None of the saved files have been tried on a real printer yet. Check a small print first.
HybridSliceCraft 0.14.1
HybridSliceCraft 0.14.1 fixes the AppImage.
Fix
- The AppImage's start file could only be run by its owner, so running the AppImage as another user, or inside a sandbox, failed with "Permission denied". The release now opens the permissions inside the AppImage and checks them. The program itself is the same as 0.14.0.
None of the saved files have been tried on a real printer yet. Check a small print first.
HybridSliceCraft 0.14.0
HybridSliceCraft 0.14.0 is about making the program fit the way you work. Most of these came from your issues. Thank you!
Shorter lists
- Printers by make. Pick the make first, then the printer of that make.
- Choose what is offered. The new Choose what is offered… button opens a window where every printer, filament, resin and print quality can be ticked in or out. Hidden presets leave the drop-down lists but are not deleted; tick them again to bring them back. Show everything and Only those in use do it in one go. Your choice is saved.
Working on the plate
- Resize by percentage. The percent value in the Placement card is now a field you can type in or drag. With several models selected they all change by the same percentage, handy for multi-part prints.
- Select several models with a box. Hold shift and drag over the view with the Move, Turn or Resize tool. Everything the box touches is added to the selection.
Importing presets
- Orca filament presets exported by a user, which hold only what was changed, were taken for print-quality presets. That put the filament in the wrong list and gave odd layer settings. They are now recognised as filaments.
- Resin presets. Import profiles now also reads PrusaSlicer resin
.inifiles, a config bundle or a single exported preset, and the button is also in resin mode. You get the printer's display size and pixels, the resin's exposure times, density, colour and cost, and the print settings' layer height, fade layers, hollow wall, support sizes and pad.
Fixes
- Light Windows theme. With Windows in light mode, pop-ups and some text came out light on the dark panels and were hard to read. The program now follows its own Dark or Light choice for everything, including the window's title bar.
All pictures in the README and the manual were made again.
Good to know
- Filament printers are grouped by the first word of their name, so a few built-in generic ones sit under odd makes. Imported and your own printers will group as you name them.
- The PrusaSlicer import has been tried on made-up files that follow its format, not yet on a real bundle from the program. Tell us if a file doesn't read right.
- The Windows theme fix could not be tried on Windows before release.
None of the saved files have been tried on a real printer yet. Check a small print first.
HybridSliceCraft 0.13.0
HybridSliceCraft 0.13.0 has a new look.
Dialogs
- Every dialog has a fixed title bar with a close button and a fixed footer with its buttons and Close. Only the middle scrolls.
- When a dialog is taller than the window, a thin scroll bar stays in view. It gets wider when the pointer comes near.
- Soft shadows at the top and bottom of every scrolling area, including the side panels, show that there is more to see in that direction.
A modern window frame on Linux
On Linux the program draws its own title bar and window edges instead of the system's plain frame: the title in the middle, round minimise, maximise and close buttons, rounded corners, and a thin outline. Drag the bar to move the window, double-click it to maximise, and drag the edges to resize.
If your desktop does it better, start the program with HYBRIDSLICECRAFT_SYSTEM_FRAME=1 to keep the system's frame.
Pictures
All pictures in the README and the manual were made again with the new look. docs/make-pictures.sh makes them all in one go.
Good to know
- The new window frame has only been tried on one Linux setup so far. Tell us if the edges, corners or buttons misbehave on yours.
- The picture of tree supports in the manual still shows the old look.
None of the saved files have been tried on a real printer yet. Check a small print first.
HybridSliceCraft 0.12.0
HybridSliceCraft 0.12.0 lets AI agents use the slicer.
An MCP server for AI agents
Start the program with hybridslicecraft --mcp and it runs as an MCP server (Model Context Protocol). It has no window and talks over standard input and output, so an assistant such as Claude, or any program that supports MCP, can slice models for you.
The agent gets these tools:
- list_catalog: the printers, filaments, resins and print profiles, including your own and imported ones.
- describe_settings: every setting by name, with its default and the allowed values of choice settings.
- inspect_model: size, volume, triangle count and whether a model is solid and watertight.
- slice_filament: slices models, or a ready-made calibration model, for a filament printer and writes the G-code. It reports print time, filament use, cost and warnings.
- slice_resin: slices models for a resin printer and writes an SL1, PNG zip, CTB, GOO or Anycubic file. It can add supports, hollow the model and add a drain hole, and reports resin use, floating parts and trapped resin.
- render_layer: a picture of one layer of a finished slice. Filament layers are drawn from above with the line types coloured, and resin layers as the exposure picture.
The manual is also offered to the agent, so it can look up how a feature works.
Settings are changed by name, for example {"walls": 4, "infill_pattern": "Gyroid"}. A wrong name or value comes back as a message that says what is allowed, so the agent can correct itself.
Setting it up
Add the program as a server in your agent program's settings. For programs that read a mcpServers list:
{
"mcpServers": {
"hybridslicecraft": { "command": "hybridslicecraft", "args": ["--mcp"] }
}
}For Claude Code: claude mcp add hybridslicecraft -- hybridslicecraft --mcp. The manual has more examples and tips.
Good to know
- The server reads and writes only the files the agent names, and it sends nothing to a printer. The agent gets the file and you decide what to do with it.
- The Flatpak can't see files outside its sandbox, so use the
.deb, AppImage,.msior.dmgfor agents. - The server has been tested by speaking the protocol directly; it has not yet been tried with every agent program. Tell us if one of them has trouble.
None of the saved files have been tried on a real printer yet. Check a small print first.
HybridSliceCraft 0.11.1
HybridSliceCraft 0.11.1 adds a manual and tidies up the program's code. Nothing changes in the G-code it writes.
A manual
There is now a manual that explains every feature, with pictures taken from the program, examples and hints. It has a section for filament printers and one for resin printers, and one subsection for each feature: from preparing the plate, supports, infill and painting with filaments to mixed filaments, hollowing, drain holes and the resin preview. You find it in the program's repository, in the file docs/manual.md, and the README links to it.
Under the hood
- All build warnings are gone, and two outdated libraries that Rust warned about for a future version are no longer used. They came from a file-writing feature of the STEP reader that the program never needed.
- A few options for the command line set the window up with a given tool, settings tab, dialog or colouring, which is how the manual's pictures were made.
hybridslicecraft --helplists them.
None of the saved files have been tried on a real printer yet. Check a small print first.
HybridSliceCraft 0.11.0
HybridSliceCraft 0.11.0 adds mixed filaments: colours made by alternating a few filaments layer by layer, the way full-spectrum printing does it. It is made for printers with several tool heads and is useful for ornamental prints.
How it works
Print two or three filaments in a repeating pattern of layers, for example red, yellow, yellow, and the eye blends the thin layers into one colour, here an orange. A pattern of layers is called a mixed filament, and you use it like any filament.
Making a mix
Under the filaments in the settings panel there is a new "Mixed filaments" list. "Add a mix" opens an editor with three tabs:
- Ratio: say how much of the layers each filament gets, and the program builds a short, evenly spread pattern.
- Cycle: click the filaments in the order they should print, such as 1-2-2-4.
- Match: pick a colour or enter a hex code, and the program finds the blend of your loaded filaments that looks closest. You can set the least share each filament must have. It tells you when no blend gets close, or when that minimum kept it from a closer one.
"Add all 50/50 blends" makes one mix for every pair of the filaments in use. The colour shown for a mix is an estimate; real filaments blend differently, so test with a small print.
Using a mix
Mixes appear next to the filaments in the paint panel. Paint them on a model with the brush, the fill or "Paint everything", and the 3D view shows them in their blended colour. How far the colour reaches into the part is set by the usual "Colour reaches in" slider, so a thin shell can be mixed while the inside stays one filament.
When you slice, each mix prints one filament per layer, with a prime tower purge at every change. The program warns you when a pattern is tall enough to show as stripes, when adaptive layer heights are on (the pattern repeats by layer), and when the printer has only one tool head.
Tips
- Use thin layers, 0.08 to 0.12 mm, and short patterns of two to four layers: a pattern taller than about 0.2 mm can be seen as stripes.
- Translucent filament blends better than very opaque filament, especially black.
- Tool heads that are slightly out of line show up as uneven colour, so calibrate the offsets of your tool changer.
Also changed
- The prime tower now turns on whenever the filament changes between layers, not only within a layer. Before, a print where one model ended and another began on a later layer could change filament without a purge.
- The delete buttons in a few panels showed an empty box; they now show a cross.
Good to know
- Colours that gradually change from one filament to another over the height of a part are not included yet.
- Prints that use no mixes produce the same G-code as before.
None of the saved files have been tried on a real printer yet. Check a small print first.