AVX2 Not detected on a CPU with AVX2 (E5-2697A V4 Xeon)

[WizardOfSpeedAndTime]

Hello!

I'm running into 2 issues, hopefully I can get some help, I tried to download the mimo-v2.6 Flash model, and get a 'no AVX2' error

It's a dual CPU system, 768GB of ram, Intel reports that the CPU has AVX2 and it's a much later architecture that should have it

https://www.intel.com/content/www/us/en/products/sku/91768/intel-xeon-processor-e52697a-v4-40m-cache-2-60-ghz/specifications.html

CPU-Z output:

Socket 1 ID = 0
Number of cores 16 (max 16)
Number of threads 32 (max 32)
Manufacturer GenuineIntel
Name Intel Xeon v4
Codename Broadwell-E/EP
Specification Intel(R) Xeon(R) CPU E5-2697A v4 @ 2.60GHz
Package (platform ID) Socket 2011 LGA (0x0)
CPUID 6.F.1
Extended CPUID 6.4F
Core Stepping M0
Technology 14 nm
TDP Limit 145.0 Watts
Tjmax 93.0 °C
Core Speed 3100.8 MHz
Multiplier x Bus Speed 31.0 x 100.0 MHz
Base frequency (cores) 100.0 MHz
Stock frequency 2600 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, AES, AVX, AVX2, FMA3, TSX
Microcode Revision 0xB000040
L1 Data cache 16 x 32 KB (8-way, 64-byte line)
L1 Instruction cache 16 x 32 KB (8-way, 64-byte line)
L2 cache 16 x 256 KB (8-way, 64-byte line)
L3 cache 40 MB (20-way, 64-byte line)
Max CPUID level 00000014h
Max CPUID ext. level 80000008h
FID/VID Control yes

Not sure if I'm doing something wrong, any ideas?

[g4lb]

Your CPU has AVX2. Setup likely reads the wrong result from Windows. Set COLI_CPU_CHECK=0 and run setup again.

[WizardOfSpeedAndTime]

thank you! checking

[WizardOfSpeedAndTime]

ok, I'm exceedingly stupid, where do i change this?

I apologise for this stupid question,

[g4lb]

Open Command Prompt in the colibri folder and run:

set COLI_CPU_CHECK=0
START-HERE.bat

[WizardOfSpeedAndTime]

Working, thank you so much.