Repository navigation
Releases
ARTIHIVE 2.0.4
ARTIHIVE 2.0.4 is the stable release of the independent eight-voice experimental drone and polyphonic FM synthesizer firmware for the M-Vave FM-1.
Created by KHAV with assistance from Arena.ai Agent Mode.
Version 2.0.4 has successfully started on physical FM-1 hardware and passed the complete automated release suite.
Highlights
STEP Sequencer
- Ten independent patterns, each containing 1–16 events.
- Record individual notes, chords, and REST events.
- Every event retains its recorded octave.
- New STEP banks start empty.
- Select patterns 1–10 with
SEQand the first ten black keys. - Build looping pattern chains by holding
SEQand pressing pattern keys in the desired order. - A new chain replaces the previous chain.
- The active pattern is followed on the screen and knob indication.
- Navigate a stopped pattern with
SEQ + OCT−/OCT+. - In POLY, record REST with
SEQ + rightmost black key. - Hold
SAVEon the STEP page to store the complete ten-pattern bank.
ARP and STEP Performance Modes
SEQ + HOMEswitches STEP between DRONE and POLY.ARP + HOMEswitches ARP between DRONE and POLY.- In POLY,
PLAYalways starts or stops ARP/STEP transport. - ARP and STEP retain entered or captured octaves.
- The live POLY octave can change while transport runs without transposing the sequence.
- CHROM RND is available in POLY and cannot run in DRONE.
- Stopping transport immediately returns the sequence indication to step one.
Timing and Voice Allocation
- ARP and STEP now use sample-accurate transport.
- Step duration remains dynamically even at high tempos.
- Sequencer attacks are spaced across FM pairs instead of repeatedly using adjacent members of the same pair.
- Live POLY notes no longer swallow audible ARP/STEP events.
- Held POLY notes remain stable while sequences run.
- Quiet or available voices are preferred for sequencer events.
- Unavoidable voice steals use a short microfade to reduce discontinuities.
- High-tempo operation has improved resistance to clicks and intermittent whistle artifacts.
SWARM
- The cellular performance mode is now called SWARM.
- Hold
RECfor more than 0.7 seconds to enter SWARM. - Release
RECto return to the interface. SAVE + RECundoes the latest SWARM session.- The full-screen cellular field reacts to output level and follows the selected colourway.
- SWARM renders at approximately 30 FPS.
- PORCELAIN includes sparse red active cells.
- BLUSH VEIN uses a black SWARM background.
Removed Functions
- The switchable lower-key LATCH mode has been removed.
- The upper-row individual drone toggles remain available.
- MUTATE has been removed.
- USER ARP has been replaced by STEP.
Installation Safety
Use stable power and a reliable data-capable USB cable.
Do not disconnect the instrument while flash writing is in progress.
Keep a known-good factory firmware package available for rollback.
License and Authorship
ARTIHIVE was created by KHAV.
Arena.ai Agent Mode assisted with design, implementation, testing, and documentation.
The firmware is distributed under GPL-3.0-only. See LICENSING.md, THIRD_PARTY_NOTICES.md, and COPYRIGHT-AUDIT.md for details.
ARTIHIVE is independent community firmware. It is not a product of, or endorsed by, M-Vave or SOMA Laboratory.
ARTIHIVE 2.0.3
ARTIHIVE 2.0.3
Author: KHAV
Arena.ai: assistance
Highlights
POLY voice allocation order is 1, 3, 5, 7, 2, 4, 6, 8, followed by oldest-active-voice stealing.
DRONE fixed-note TUNE transitions are smooth. In POLY, the former MOD knob is now legato-only GLIDE; zero remains immediate and non-zero values connect overlapping notes.
TIME 1/2 use queued 31.9 ms dual-head crossfades. At maximum TIME, both MOD DEL bars reach the ends of their rails. Rapid encoder detents are coalesced to the latest target without restarting the active fade.
A clean install starts with the ORGAN preset while valid saved settings remain intact.
SELECT/VOICES and ALGORITHM/PAIRS stop at their endpoints.
PRESETS remains cyclic.
Fixed various visual bugs and inconsistencies across the interface.
Validation
The complete automated release suite passed. The release application is 163,732 bytes, static RAM usage is 18,976 bytes, and the firmware package is 612,230 bytes.
Hardware confirmation for the queued TIME transition was performed on the accepted pre-release build before promotion to 2.0.3.
Firmware checksum
SHA-256: 055aeeed495248b44783f4ffbf4a040916256d66ec20e91139c06295288256f4
Source identity
Commit: d4d6823355f17cd70d4950fb60b9ede91acb368c
Tag: artihive-2.0.3
ARTIHIVE 2.0.2
ARTIHIVE 2.0.2
DISORDER
- Fixed the high-contrast flashing behaviour present in ARTIHIVE 2.0.1.
- DISORDER no longer alternates between strongly contrasting light and dark colourways.
- The flashing-related visual safety issue remains present in version 2.0.1; updating to 2.0.2 is recommended.
- Added a full-screen, audio-reactive 30×30 cellular animation displayed as 8×8-pixel blocks.
- The animation uses the background, texture, and activity colours of the selected colourway.
- Output level controls cell activity and intensity.
- HYPER LFO spatially shifts the field without altering the audio waveform.
- Continuous parameters follow independent, smooth, safely bounded bidirectional trajectories.
- One discrete parameter changes periodically.
- DISORDER is activated by holding REC for more than 700 ms.
- Releasing REC restores the normal interface and selected colourway.
- SAVE + SEQ restores the patch from before the most recent DISORDER session.
- Negative, hardware inversion, and additional contrast effects are not used.
FREEZE and MOD DEL
- Removed the click at the FREEZE loop boundary.
- Added a bounded 256-sample crossfade that operates only at the loop boundary.
- Preserved the original tone without permanent filtering.
- Kept the MOD DEL SQR de-click fix independent from HYPER LFO AND.
- HYPER LFO OR remains smooth and soft.
- HYPER LFO AND retains its stepped character.
ULTRAVIOLET
- Added the new ULTRAVIOLET colourway.
- Uses a solid deep blue-violet background without texture.
- Adds cold white printing, lavender secondary elements, and electric-violet accents.
- In DRONE, the selected ENVELOPE/SHARP pair is white and all other pairs are lavender.
- Envelope indication inside the eight metal contacts is black.
- In POLY, ENVELOPE and SHARP graphs remain black.
Compatibility and Migration
- Added migration for existing settings and user presets.
- Preserved factory and user preset meaning.
- Preserved startup behaviour, DSP behaviour, interface geometry, and control assignments.
- Preserved exact silence until PLAY.
- Package identity remains
FM-1_9620.
ARTIHIVE 2.0.0
ARTIHIVE 2.0.0
ARTIHIVE is an independent eight-voice drone and polyphonic synthesizer firmware for the M-VAVE FM-1.
Version 2.0.0 adds a full 27-key chromatic POLY mode alongside the eight-voice DRONE mode, with evolving FM pairs, global and per-voice envelope control, Hyper LFO, stereo motion, modulated delay, distortion, output compression, mutation, presets, and exact 10–400 BPM arpeggiation.
Instrument modes
- DRONE: eight lower keys act as envelope-trigger sensors for eight independently tuned voices. They are not note-pitch keys. The upper row controls voice latches.
- POLY: all 27 keys form a chromatic keyboard. Eight voices use oldest-note stealing. Note level is fixed at 127, and drone latches and HOLD are inactive.
FM-1 flash compatibility
The application and update loader accept both known 1 MiB FM-1 flash chips:
- Puya P25Q80 — JEDEC
0x856014 - UC25HQ80 — JEDEC
0xB36014, used in newer FM-1 units
Unknown flash devices are refused.
Installation
Download artihive-2.0.0.fwsc from the Assets section below and install it with M Flasher.
Package identity: FM-1_9620
Verification
Automated application, loader, package-layout and reproducibility tests pass.
The updated release has been tested on physical FM-1 hardware through M Flasher:
- installation from stock V15;
- installation from another third-party firmware;
- successful startup of ARTIHIVE;
- successful replacement of ARTIHIVE with another firmware.
These results cover the Firmware Hub transition paths.
Direct testing on an FM-1 unit specifically equipped with the UC25HQ80 flash chip is not claimed.
License
ARTIHIVE is distributed under GPL-3.0-only.
Bundled JieLi-derived components retain their Apache-2.0 notices, and the bundled Terminus font retains its OFL-1.1 notice.
ARTIHIVE is an independent community project and is not affiliated with or endorsed by M-VAVE or SOMA Laboratory.