Skip to content

Enabling Large Address Awareness

Kaiconure edited this page Oct 31, 2025 · 1 revision

Introduction

WindowerLauncher v1.0.7.0 added the ability to patch pol.exe to make it "large address aware" (LAA). By default, 32-bit applications are limited to a maximum of 2 GB of RAM. With LAA enabled, this is increased to a cap of at least 3 GB -- and even more on high end 64-bit systems with massive amounts of RAM installed.

This makes a significant improvement in game stability. Black background on load are almost completely eliminated, because the memory cap that prevents larger scenery assets from loading is no longer so stringent. Frequent addon load/unload cycles are less destabilizing. And you finally have the possibility of using some of your modern hardware dominance in a meaningful way in FFXI.

How it works

First of all, LAA is controlled via a single bit stored somewhere in an executable (EXE) file's application header. This bit can be flipped to immediately enable or disable the setting. Because a modification to pol.exe itself is required, you must fully exit from the game before adjusting these settings.

Note: Modifying pol.exe has the chance of invalidating digital signatures and checksums. Do this at your own risk. If you're concerned about what may be happening, WindowerLauncher is fully open source and you can view (or even build the tool yourself) to verify nothing untoward is going on. You might consider backing up your original pol.exe file if you have concerns.

Note, Part 2: Although somewhat rare, pol.exe itself may be updated in a monthly update. If this happens, you will need to patch it for LAA again afterward.

To check your LAA status, run this command:

wl laa

This will output the path to your pol.exe file, and indicate whether or not it's patched for LAA.

You can then run the following command to enable LAA for pol.exe:

wl laa -set:on

You can also run this command to turn it off again:

wl laa -set:off

Clone this wiki locally