v0.1.7

Other

• Hand back a captured macOS device on the caller's thread

v0.1.6

Other

• Report kernel driver re-attach failures from release_interface

v0.1.5

Other

• Support kernel driver detach on macOS (requires root)

v0.1.4

Other

• Add Device::serial_number and lookup by vid/pid list + serial

Added

• Device::serial_number returns the serial number without opening the
  device: from sysfs on Linux, the IOKit registry on macOS, and the parent
  hub on Windows (so it works whatever driver the device is bound to).
• Context::find_device_by_serial and Context::open_device_by_serial
  locate a device by serial number among a list of vendor/product pairs.

v0.1.3

Other

• Fix string descriptors with trailing junk and harden string reads

Fixed

• String descriptors end at the first NUL character. Some devices (an
  FT2232D clone here) declare a longer descriptor holding a NUL-terminated
  string followed by leftover EEPROM bytes, which came back as garbage
  appended to the serial number; Linux cuts at the NUL too.
• String reads follow the Linux kernel's recovery: if a device stalls the
  full-size request or answers it short, the 2-byte header is read and then
  exactly the declared length. A malformed or empty language table falls
  back to US English, and the language is read once per handle instead of
  before every string.
• The hardware tests no longer probe a nonexistent string index on every
  attached device: some FTDI clones stall all requests after that until
  they are reset. The check now runs only on the nominated bulk-IN device.

v0.1.2

Other

• Add USB Ethernet devices (ECM, NCM, RNDIS) and pktkit integration
• Let class helpers share a taken device and discover every interface
• Add class-helper examples and document the new features
• Add the uvc feature: video descriptors, controls and frame streaming
• Fix redundant doc links in the serial module
• Add the serial feature: CDC-ACM and FTDI behind one SerialPort
• Add the msc feature: bulk-only transport, SCSI commands, block device
• Add the hid feature: HID interfaces, report descriptor parser, report I/O

Added

• Class helpers, each behind its own opt-in feature:
  • hid: HidDevice (report I/O with hidapi's report-ID conventions,
    GET/SET_REPORT, idle and protocol requests) and ReportDescriptor, a
    report descriptor parser that yields every field's offset, size,
    usages and logical range.
  • msc: MassStorage, SCSI over the bulk-only transport with stall and
    reset recovery, sense decoding and UNIT ATTENTION retries, and
    BlockDevice, a Read + Write + Seek view of a logical unit.
  • serial: SerialPort for CDC-ACM devices and FTDI chips, with line
    settings, flow control, modem lines and status, break, purging,
    std::io::Read/Write, and FTDI chip detection, baud divisors, latency
    timer and bit modes.
  • uvc: Camera with format/frame/control descriptors and unit controls,
    and Stream, which negotiates, streams over isochronous or bulk
    endpoints and reassembles frames.
• net feature: NetDevice drives CDC-ECM, CDC-NCM (16-bit transfer
  blocks) and RNDIS functions, with a non-blocking send path, a receive
  callback or queue, link state and counters; net::interfaces lists a
  device's network functions.
• pktkit feature: NetDevice implements pktkit::L2Device. This is the
  only feature that adds a dependency.
• DeviceHandle::claim_all_interfaces takes a whole device (detaching every
  kernel driver) so several class helpers can run on it; helpers lease
  their interfaces exclusively and borrow the handle's claims when present.
  DeviceHandle::is_claimed reports a claim.
• Discovery for composite devices: hid::interfaces, msc::interfaces,
  serial::ports, uvc::interfaces, plus HidDevice::open_all,
  SerialPort::open_all and SerialPort::open_interface (CDC-ACM or FTDI,
  detected).
• hid_dump, msc_info, serial_monitor and uvc_capture examples, and a
  class-helper hardware test suite driven by environment variables.

v0.1.1

Other

• Fix issues found reviewing the new hotplug and isochronous code
• Test that two sessions can watch hotplug at the same time
• Simplify the netlink drain loop
• Assert the Windows structure layouts at compile time
• Document the hotplug feature and the Windows isochronous packet rules
• Add Windows and macOS hotplug backends, and Windows isochronous transfers
• Add optional hotplug notifications with a Linux netlink backend
• Make hardware tests tolerate synthesised root hubs
• Write README and changelog for the initial release
• Add macOS backend (IOKit IOUSBLib, CFRunLoop event thread)
• Add Windows backend (SetupAPI/CfgMgr enumeration, hub ioctls, WinUSB + IOCP)
• Add hardware tests and list_devices example
• Add core API and Linux usbfs backend
• Fix config descriptor test fixture attributes

Added

• Core API: Context, Device, DeviceHandle, Transfer with synchronous
  helpers and the asynchronous submit/cancel/wait/callback/Future layer.
• Descriptor parsing (device, configuration tree, interface associations,
  SuperSpeed companions, string descriptors, BOS retrieval).
• Linux backend (sysfs + usbfs) with bulk URB splitting, isochronous
  transfers, timeouts, cancellation, disconnect handling and kernel-driver
  detach/attach.
• Windows backend (SetupAPI/CfgMgr enumeration, hub ioctls for descriptors,
  WinUSB transfers on an I/O completion port, composite-function support).
• macOS backend (IOKit IOUSBLib device/interface objects, CFRunLoop event
  thread, kernel-side timeouts on the 182 interface revisions).
• Optional hotplug feature: Context::hotplug() builds a filtered watcher
  that reports devices arriving and leaving, either through a callback or a
  queue, with enumerate_existing for a race-free start. Backed by netlink
  uevents on Linux, CM_Register_Notification on Windows and IOKit matching
  notifications on macOS.
• Isochronous transfers on Windows, through the WinUSB isoch API (Windows
  8.1 and newer), including per-packet results for IN transfers and seamless
  stream continuation while transfers stay queued on an endpoint.
• list_devices and hotplug examples, and a self-skipping hardware test
  suite.

v0.1.0

chore: Release package rawusb version 0.1.0