Repository navigation
Releases
My moto 2.3.0
My moto 2.3.0
Tyre pressure, built in.
⬇️ Download
OpenCfMoto.apk: most phones (64-bit)OpenCfMoto.armv7.apk: only if Android says the app is not compatible (32-bit Android)
✅ On 2.2.1 or 2.2.2? Tap Me ▸ Check for update ▸ Install, or just wait. Automatic updates install it within a day on Wi‑Fi.
✅ On 2.2.0 or 2.1.0? Install over it. Same signing key, so your rides and settings stay.
🛞 New: tyre pressure (TPMS)
- Your valve-cap sensors, read directly. Bluetooth TPMS sensors of the kind sold with the HR TPMS app now talk straight to My moto, so you don't need their app. Me ▸ Tyre pressure shows each tyre's pressure, temperature and sensor battery, live, and when it was last heard.
- Pair in seconds: type or scan the ID printed on the sensor, use Learn, or tap the sensor in Sensors nearby.
- Your model's pressures. On a CFMoto 150SC: 27.6 psi (190 kPa) front and rear, 29 psi (200 kPa) rear two-up, with the tyre sizes and minimum tread. Each tyre shows how far it is from its target.
- Alerts: a notification with sound when a tyre is low, high, too hot, or its sensor battery is low. Limits follow your model until you set your own; psi, bar or kPa; °C or °F.
- On the Android Auto side panel: your bike with each tyre's pressure under its own wheel: green when fine, red when not, grey while a sensor sleeps. Preview it on the Tyre pressure screen.
- Ride tab: a Tyres card with both pressures.
- Watch in the background (optional): keeps listening with the app closed, so alerts reach you mid-ride.
ℹ️ Notes
- Sensors sleep a few minutes after the bike stops. Roll it a few metres to wake them.
- The side panel needs Setup ▸ side panel (as before). Pairing and limits are included in Full backup.
- Signed with the maintainer's debug key:
SHA-256 58:b3:7e:fe:73:95:fe:7e:55:ae:2d:90:fd:ea:b1:19:97:70:d8:bf:99:d5:ef:fb:5d:bc:b9:1a:eb:ca:53:ac - Android 10+. See the README.
- Checksums (SHA-256):
OpenCfMoto.apk:70d3e64d7542edf7b5bd4df0aaa6b860e3be283ebea862d5ae194f515c1e51a1OpenCfMoto.armv7.apk:b5a851261b2389d4e7e46dac7327f4f57c9ecc33faa65e75b8c97f840bc19876
My moto 2.2.2
My moto 2.2.2
A small fix release.
⬇️ Download
OpenCfMoto.apk: most phones (64-bit)OpenCfMoto.armv7.apk: only if Android says the app is not compatible (32-bit Android)
✅ On 2.2.1? Tap Me ▸ Check for update ▸ Install, or just wait. Automatic updates install it within a day on Wi‑Fi.
✅ On 2.2.0 or 2.1.0? Install over it. Same signing key, so your rides and settings stay.
🛟 Fixed
- Stop now stays stopped. With Keep Wi‑Fi after disconnect on, pressing Stop while the app was still looking for the bike didn't end the search. A minute later it went back to Link dropped — reconnecting… by itself. Stop now cancels the Wi‑Fi search and any queued connect steps, so nothing restarts until you tap Connect.
ℹ️ Notes
- Signed with the maintainer's debug key:
SHA-256 58:b3:7e:fe:73:95:fe:7e:55:ae:2d:90:fd:ea:b1:19:97:70:d8:bf:99:d5:ef:fb:5d:bc:b9:1a:eb:ca:53:ac - Android 10+. See the README.
- Checksums (SHA-256):
OpenCfMoto.apk:9b0cc96a5ccbf4a44bdd020887eac9ea92c91711b230a1909fcd688c4c35397aOpenCfMoto.armv7.apk:e91229e40c94fae16e1e4af9da4d360f6ac631b8311a383f1e2bce948ebf79ed
My moto 2.2.1
My moto 2.2.1
From this version on, My moto updates itself from this repo's releases.
⬇️ Download
OpenCfMoto.apk: most phones (64-bit)OpenCfMoto.armv7.apk: only if Android says the app is not compatible (32-bit Android)
✅ Updating from 2.2.0 or 2.1.0? Install over it. Same signing key, so your rides, fuel log, service history and settings stay. This is the last update you install by hand.
🆕 New
- 🔄 In-app updates. Me ▸ Check for update ▸ Install downloads the new version and installs it in place, with no browser or file manager. Every download is checked first: its SHA-256 must match GitHub's, and it must be My moto, not older, and signed with the same key.
- ⏱️ Automatic updates (Setup ▸ Startup & recovery, on by default). Once a day on Wi‑Fi, My moto installs the newest release by itself. It never updates while you're connected to the bike or logging a ride, because updating restarts the app.
- 📶 Wi‑Fi off? One tap. Open the app with Wi‑Fi off and Android's Wi‑Fi panel slides up so you can switch it on. Connect with Wi‑Fi off shows the same panel.
🔁 Changed
- Release notes in the update dialog show
code, italics and quotes properly.
ℹ️ First update, one time only
- Android asks you to allow My moto to install apps (Settings ▸ Install unknown apps). Turn it on once.
- The first in-app update asks "Update this app?". Tap Update.
After that, on Android 12+, updates install without asking.
ℹ️ Notes
- Signed with the maintainer's debug key:
SHA-256 58:b3:7e:fe:73:95:fe:7e:55:ae:2d:90:fd:ea:b1:19:97:70:d8:bf:99:d5:ef:fb:5d:bc:b9:1a:eb:ca:53:ac - Android 10+. Setup is unchanged; see the README.
- Checksums (SHA-256):
OpenCfMoto.apk:5e28a43894d471d57ac567d20c0873a5155747e10f7e9b5099968f019ad34ba9OpenCfMoto.armv7.apk:4dc4e86a1337fadeebf29a63596cb09c407d69c1438598376ccfcecb562c7061
My moto 2.2.0
My moto 2.2.0
The Rider Extras build is now called My moto: a new look, simpler navigation and a safer Android Auto.
Same connection core, built on OpenCfMoto by Alexandru and contributors.
⬇️ Download
OpenCfMoto.apk: most phones (64-bit)OpenCfMoto.armv7.apk: only if Android says the app is not compatible (32-bit Android)
✅ Updating from 2.1.0? Install over it. It's signed with the same key, so your rides, fuel log, service history and settings stay.
⚠️ Coming from the original OpenCfMoto app? This build uses a different key. Uninstall the original first. Your data lives in that app and is removed with it.
🆕 New
- New name and look. The app is now My moto, with a new icon (gauge ring + signal), a splash screen and a refreshed dark/light theme.
- Three tabs: Ride · Trips · Me. The Map tab is gone. Tap 🔍 on Ride to search a place. When the bike asks you to type on the phone, the same search opens over Ride.
- 🔒 Lock Android Auto while moving (Setup, experimental, off by default). Phone GPS tells Android Auto when you're riding (from 10 km/h), so it locks the keyboard, settings and long lists like it does in a car. It unlocks 5 s after you stop. Video and voice keep working.
- 🛟 Restore working projection (Setup). One tap puts video, fit, resolution, margins, profile, strip and experimental switches back to defaults for this bike. Your Wi‑Fi mode, buttons and rides are kept.
- Trips and Me regrouped into clear sections, with larger touch targets and better TalkBack labels.
🔁 Changed
- Map & GPX is no longer on the home screen. Open it from the map button in Dash view, or search a place from Ride when nothing is projecting.
- Report a problem is removed. Use Me ▸ Logs ▸ Share to send diagnostics.
- Shared logs now cut GPS coordinates to ~1 km.
- About shows this build's copyright and links to its source and to the upstream project. Credits and Discord links are removed from the app.
ℹ️ Notes
- Signed with the maintainer's debug key:
SHA-256 58:b3:7e:fe:73:95:fe:7e:55:ae:2d:90:fd:ea:b1:19:97:70:d8:bf:99:d5:ef:fb:5d:bc:b9:1a:eb:ca:53:ac - Android 10+. Setup is unchanged; see the README.
- Checksums (SHA-256):
OpenCfMoto.apk:ee3a8d46e3ffac3f56ab6e0af842f4769e48b7747de5a7563e6928648542c2bcOpenCfMoto.armv7.apk:572c0f61765e03b88db8e211810df1278e6bbb4c1a84b0e2b3527c9a026fd6f5
OpenCfMoto 2.1.0 — Rider Extras
OpenCfMoto 2.1.0 — Rider Extras
Wireless Android Auto on CFMoto MotoPlay / EasyConnect dashes, plus the things a rider actually checks
every day: range, rain, rides and service. Built on OpenCfMoto
2.0.18 by Alexandru and contributors — same connection core.
⬇️ Download
OpenCfMoto.apk: most phones (64-bit)OpenCfMoto.armv7.apk: only if Android says the app is not compatible (32-bit Android)
⚠️ Coming from the original OpenCfMoto app? This build is signed with a different key, so Android
won't install it over the original. Uninstall the original app first. Your rides, garage and settings
live in that app and are removed with it.
🆕 New
- ⛽ Fuel log & range. Log fill-ups in Me ▸ Fuel to get measured km/L, cost per km and monthly spend. The dash side panel shows ⛽ ~185 km, counting down live (amber under 50 km, red under 20 km).
- 🌧️ Rain alerts on the dash. Rain in 35 min, Drizzle, Rain ahead (~10 km up the road) or the temperature, from Open-Meteo. Your position is rounded to ~1 km, and you can turn it off in Setup.
- 🌿 Eco speed coach. A per-model eco band (150SC: 40–60 km/h, ~5–6.5k rpm) shows a ✓ / Ease off hint beside the turn-by-turn directions.
- 📈 Weekly ride report. Distance, day chart, eco %, fuel used and cost, and your best ride. A summary notification arrives every Monday morning.
- 🔧 Service history with receipt photos. Every Mark serviced keeps the date, km and photos (take or choose).
- 🔵 Log rides over the bike's Bluetooth. Optional: rides are logged whenever the bike's Bluetooth connects, with no projection needed.
- 🗂️ Full backup & restore. Rides, fuel, maintenance, photos and settings go into one zip. Restore merges rides.
- 🧩 Home-screen widget. Shows range, last ride and next service.
- 🏍 Bike render. The Ride screen shows a clean studio render of the 150SC.
🛟 Fixed
- If Android Auto dropped after it was already running (e.g. during a Wi-Fi blip), the dash could relink
to a dead session and show the map with no directions. The app now restarts Android Auto (up to 3×
per connection) before relinking the dash.
🔁 Changed
- The Donate buttons are removed.
- The in-app update check reads this fork's releases.
- Anonymous telemetry is disabled in this build. Nothing is sent to the original project's server.
ℹ️ Notes
- Signed with the maintainer's debug key:
SHA-256 58:b3:7e:fe:73:95:fe:7e:55:ae:2d:90:fd:ea:b1:19:97:70:d8:bf:99:d5:ef:fb:5d:bc:b9:1a:eb:ca:53:ac - Android 10+. Setup is unchanged; see the README.
- Checksums (SHA-256):
OpenCfMoto.apk:e62c144944cf4fd4007fa8a721ab5bcb6a9a76a49621cbd73714175538fd4bc8OpenCfMoto.armv7.apk:663ecb7412c7ee048a3d33d611731711f5bfb9fd9466d53a56f591eee64764f5
Licensed under AGPL-3.0. Full source is in this repository.