Skip to content

AnimatedPixelClock v2.4.0-beta1

Pre-release
Pre-release

Choose a tag to compare

@Keralots Keralots released this 05 Oct 18:58
· 39 commits to main since this release

AnimatedPixelClock v2.4.0-beta1

This is a beta. It brings game mode, which still needs testing on more
controllers and boards. The clock itself runs the same code paths as 2.3.2
plus the changes listed below. Feedback and bug reports are welcome in the
issues. To go back, upload the OTA_ONLY image of 2.3.2 on the Firmware Update
page; settings are kept.

What's new

  • Game mode: play Falling Blocks, Snake, Bricks, Space Rocks, Runner, Defenders
    and Light Cycles on the panel with an Xbox Wireless Controller (model 1708 or
    newer, controller firmware 5.x) over Bluetooth LE. Start it from the new
    Game mode page or GET /api/game/start. The page lists best scores with
    reset buttons and has rumble, idle timeout and Falling Blocks options; the
    game list shows the pad's battery. Best scores travel with the configuration
    export and import. While a game runs the panel drops to 5 bits per colour and
    the night schedule is paused. Game mode ends after 2 minutes without a pad,
    60 seconds after the pad is lost, after the idle time, or from the page.
  • Game mode ships as a separate firmware: every board now has a clock-only
    image and a -games image. Bluetooth keeps about 29KB of internal memory
    reserved once it is in the firmware, even when nobody plays, so the
    clock-only image stays the recommended one. The Maintenance page shows which
    variant a clock runs, and the update page asks before installing the other
    one.
  • Display panel options on the Maintenance page: driver chip, data clock, latch
    blanking, clock phase, colour depth and minimum refresh rate, with live test
    patterns. For panels from other batches that stay dark, flicker or show
    ghosting. They are part of the configuration export and import.
  • WiFi transmit power setting on the Maintenance page (19.5 down to 8.5 dBm,
    also GET /api/wifi/txpower?dbm=). Some small boards, such as the
    ESP32-S3-Zero, connect and serve the portal much faster at 11-13 dBm.

Changes

  • The burning room ambient effect is removed. A clock that had it
    selected shows Space Invaders instead.
  • The web flasher always erases the whole board on install. Keeping data never
    worked: the full image overwrote the settings anyway.

Fixes

  • Dark flashes on panels whose refresh rate is close to the animation frame
    rate: a frame is no longer cleared before the panel has finished showing it.
  • The brightness ramp test pattern lights every column.

Install

  • New device: flash firmware-v2.4.0-beta1-<board>.bin at 0x0. The web
    flasher at https://pixelclock.stolaris.dev/ keeps offering the stable 2.3.2.
  • Existing device: upload OTA_ONLY_firmware-v2.4.0-beta1-<board>.bin, or
    OTA_ONLY_firmware-v2.4.0-beta1-<board>-games.bin for game mode, on the
    clock's Firmware Update page. Do not upload a full image as an OTA update.
  • Windows: pc_stats_monitor_v4.exe is the same companion as in 2.3.2.

Boards: wroom = ESP32-S3-WROOM-1 N16R8 (16 MB), supermini =
ESP32-S3-Zero / Super Mini (4 MB), waveshare = Waveshare ESP32-S3-RGB-Matrix
(32 MB). Each has a -games twin with game mode. Verify downloads against
SHA256SUMS.txt.