Repository navigation
Releases
Bed Ready 1.4.0
Added
-
Bed Ready HueForge: reliefs bigger than the bed print as tiles. In relief mode the width can go up to 1000 mm. A picture wider or deeper than the U1 bed, less 10 mm to spare, is cut evenly into tiles that each fit. The preview shows the seams, and the verdict says "3×2 tiles, each fits the bed" instead of asking you to reduce the width. Neighbouring tiles share their edge heights, so the pieces butt together flush. Every tile prints with the same colour bands, so it is one picture, not several re-solved ones. The 3MF export asks for one name and saves
name-r1c1-U1.3mf,-r1c2-and so on beside it; STL saves one file per tile. A hanger is left off a tiled print, and the verdict says so. -
Bed Ready HueForge: fix the colour of one area. In relief mode, click an area of the preview and pick, from the colours the stack can print, the one it should be. The area is the connected run of similar colour in the picture around the click (small, medium or large spread), so a second patch of the same colour elsewhere is left alone. Fixes are listed with how many pixels each took and the colour it actually prints, and each can be removed. They are kept as a spot and a colour, not a height, so they hold when the width, height, filaments or vividness change; a new picture clears them. The 3MF and the STL print the fixed heights.
-
Bed Ready HueForge: hang a relief on a nail, or make it a keychain. Print settings in relief mode have a "hanger": a round hole through the top of the picture, a wall's width in from the edge, or a loop on a tab above it. The hole is 2 to 12 mm (4 mm takes a keyring). The loop's tab prints 1.6 mm thick, or the relief's full height if that is thinner, never thinner than the base, so it does not snap off a keyring. The preview shows the hole and the tab in the colour the tab prints, and the size includes the tab. Both the U1 3MF and the STL carry it. The part stays one closed shell; a hole that would cut a small picture in two is left out.
-
Bed Ready HueForge: measure your filaments from a printed card. "Calibrate filaments" prints a small U1 card from the stack: one row per filament, steps of 1 to 13 layers over two contrasting backings, framed in the darkest filament with a light square marking the top-left. Photograph it, click its four corners, and Bed Ready measures each filament's real colour and TD (
lib/hueforge-calibrate.js), shows them next to the stated values with a fit check, and puts them into the stack on "Use measured values". The relief then composites with measured numbers instead of the colour on the label and a TD guessed from lightness. Exposure and white balance are corrected from the lightest filament's stated colour. TD is read from the difference between the two backings, so exposure does not change it. A filament too opaque or too translucent for the steps is flagged rather than given a made-up TD.
Bed Ready 1.3.0
Before you update
- Bed Ready 1.3.0 needs macOS 13 (Ventura) or later. The app is built on a
newer engine that no longer runs on macOS 12. If your Mac is on macOS 12,
stay on 1.2.0 until you can update macOS — 1.3.0 would install and then not
open. - A copy of your data is saved before anything changes. The first time
1.3.0 opens your library it keeps the 1.2.0 copy in your backups folder
(pre-update-v1.3.0-…), however you installed it.
Added
- Browse, download and publish on MakerRun. Search the public MakerRun
catalogue from Bed Ready, read a design's licence and files, and download it
straight into your print-file library with its source and creator recorded.
Publish one of your own prints from its card: you confirm first, it goes to
MakerRun's review, and a failed step can be finished, skipped or deleted. - PrusaSlicer projects from Bambu and Orca files. Converting for an MK4/MK4S
with MMU3 or a CORE One INDX now writes a real PrusaSlicer project — paint,
one colour and material per tool, centred on the bed. On the INDX, colours no
tool holds can print as ColorMix blends. - Convert or save one plate. A multi-plate project shows its plates;
convert one on its own, or save it as its own 3MF. - Match to loaded spools. Send each colour in a file to the spool that is
actually loaded on your printer (or one you pick from your shelf), with how
close each match is, a warning when the material differs, and no empty slot
ever chosen. - A spool's size when new can be set on spools added before it was
recorded, so their material cost is right. - New printers: Prusa MK4S + MMU3, CORE One INDX 8T and INDX 4T.
Fixed
- Converting a PrusaSlicer file now changes it. Prusa's settings were being
read and written wrong, so a Prusa-to-Prusa conversion changed nothing while
saying it had. - Painted colours stay on the right filament when colours are moved to
other slots, and every filament's temperature and type move with its colour.
"Merge to the nearest slots" now actually merges. - Colour bands are worked out per plate, so a pause is never planned at
another plate's height. - Full Spectrum settings stay put when Orca opens the file; changing nozzle
size adjusts line widths and layer heights; files from other slicers open
fully in Snapmaker Orca. - A preview lost after restoring a backup is made again from the model file.
- The wear rate of a quiet printer is no longer inflated in the calculator.
- Print-file cards hold their own buttons, and update and safety messages
say Bed Ready. - Tougher against broken or hostile 3MF files, which can no longer hang the
converter.
Bed Ready 1.2.0
Built from KhaytApp/Khayt@abdb76c. See the Khayt CHANGELOG for what changed.
Bed Ready 1.1.0
Built from KhaytApp/Khayt@846a66a. See the Khayt CHANGELOG for what changed.
Bed Ready 1.0.0-beta.9
Built from KhaytApp/Khayt@4925531. See the Khayt CHANGELOG for what changed.
Bed Ready 1.0.0-beta.8
Built from KhaytApp/Khayt@445f28d. See the Khayt CHANGELOG for what changed.
Bed Ready 1.0.0-beta.7
Maintenance + hardening beta. Auto-updates from beta.3 onward — beta.3+ users get this automatically; only beta.1/beta.2 need a one-time manual install.
Fixes
- Fixed a rare blank dashboard on first launch (an initial-render race).
Hardening
- Library downloads are now streamed with a memory cap — a design file can no longer balloon memory if the server misreports its size.
- The website → app sign-in link now carries a single-use security token (login-CSRF defence-in-depth) on top of the existing time-limited window.
Under the hood
- CI now runs the Bed Ready smoke + a branding regression guard on every change.
- Groundwork for Windows code-signing (activates once a certificate is in place).
macOS build is Developer ID signed + notarized + stapled; Windows & Linux included.
| Platform | Download |
|---|---|
| macOS (Apple Silicon) | BedReady-1.0.0-beta.7-mac-arm64.dmg |
| Windows (installer / portable) | BedReady-1.0.0-beta.7-win-x64-Setup.exe / -portable.exe |
| Linux (AppImage / deb) | BedReady-1.0.0-beta.7-linux-x86_64.AppImage / -amd64.deb |
Bed Ready 1.0.0
Built from KhaytApp/Khayt@bef8f8d. See the Khayt CHANGELOG for what changed.
Bed Ready 1.0.0-beta.6
Bed Ready 1.0.0-beta.6 — this is a beta. Bed Ready updates itself from beta.3 onward, so beta.3–5 users get this automatically.
Now a fully independent app
Bed Ready now stores its data in its own folder (previously it shared Khayt's). Your existing data is migrated automatically on first launch — nothing to do. (Running both Bed Ready and Khayt on one machine no longer risks them overwriting each other.)
Branding fixes — it's "Bed Ready" everywhere now
- Fixed spots that still said "Khayt": the macOS menu bar (About / Hide / Quit), the auto-update message, feedback/slicer/backup hints, recovery-code file, and more — across all 8 languages.
Downloads
| Platform | File |
|---|---|
| macOS (Apple Silicon, signed + notarized) | BedReady-1.0.0-beta.6-mac-arm64.dmg |
| Windows (installer / portable) | BedReady-1.0.0-beta.6-win-x64-Setup.exe / -portable.exe |
| Linux (AppImage / .deb) | BedReady-1.0.0-beta.6-linux-x86_64.AppImage / -amd64.deb |
Bed Ready 1.0.0-beta.5
Bed Ready 1.0.0-beta.5 — this is a beta. Bed Ready updates itself from beta.3 onward (checks on launch and via Settings → Check for updates), so beta.3/beta.4 users get this automatically. Only beta.1 / beta.2 need a one-time manual install.
New: My BedReady library (site ↔ app sync)
Sign in to your BedReady account from the Home screen (☁️ My BedReady library) and pull your saved designs straight onto your computer — connect once via bedready.io, then Sync and Download.
Hardening (pre-release audit)
- Sign-in deep link now only accepts a link you started from the app (blocks unsolicited
bedready://links). - Downloads are restricted to HTTPS bedready.io/storage hosts with a size cap.
- Fixed the library panel's appearance in the light theme; added keyboard focus handling and screen-reader announcements.
Downloads
| Platform | File |
|---|---|
| macOS (Apple Silicon, signed + notarized) | BedReady-1.0.0-beta.5-mac-arm64.dmg |
| Windows (installer / portable) | BedReady-1.0.0-beta.5-win-x64-Setup.exe / -portable.exe |
| Linux (AppImage / .deb) | BedReady-1.0.0-beta.5-linux-x86_64.AppImage / -amd64.deb |