Skip to content

Releases

DSH Memory 1.0.14

Choose a tag to compare

@KingsleyAsher KingsleyAsher released this 07 Nov 16:02
ce3c38a

DSH Memory 1.0.14

记忆插件支持独立运行。知识库可通过统一接口读写全局记忆,聊天表达学习可通过同一接口保存项目档案。知识库原文继续负责联动条目。

记忆页收到通知后更新条目差异。正常连接时复用缓存,旧宿主或通知断开时使用版本核对。删除记忆后可以继续新增。

建议搭配知识库插件 2.5.10。隔离测试覆盖新增、删除、联动和会话隔离,实际桌面加载以安装后为准。安装后完全退出 DSH(含托盘)再打开。

1.0.13 · DSH Memory

Choose a tag to compare

@KingsleyAsher KingsleyAsher released this 07 Nov 13:43
6ce3607

DSH Memory 1.0.13

知识库服务交接或重连时,记忆页继续显示本地记录并提示正在重连。收到服务就绪通知后自动重新加载联动记忆。若通知缺失,约 3 秒后重试。

同一会话重新打开记忆页时,可先显示上次成功读取的联动结果,并在后台刷新。知识库连接或权限变化会使旧快照立即失效。

配合知识库插件 2.5.6 使用。发布检查覆盖重连通知、兜底重试、缓存过期后的重开和失效后的隔离。安装后完全退出 DSH(包括托盘)再打开。

DSH Memory 1.0.13

During a knowledge service handoff or reconnect, the Memory page keeps local entries visible and shows a reconnecting status. It reloads linked memories on readiness and retries after about three seconds if the notification is missed.

Reopening the same session can display the last successful snapshot while refreshing in the background. Connection or permission changes invalidate the old snapshot immediately.

Pair with Knowledge Base plugin 2.5.6. Release checks cover readiness, fallback retry, reopen after expiry, and invalidation. Fully exit DSH including the tray process and reopen after installing.

Build: 3ce93962f76e43b7

SHA-256: d651e59293d05ad4ed10a8bfaa9c0740adf4d49f55e24b4fe4e58aaa6d50f873

1.0.12 · DSH Memory

Choose a tag to compare

@KingsleyAsher KingsleyAsher released this 07 Nov 13:13
d227a0d

DSH Memory 1.0.12

记忆管理页打开历史会话时,按已保存的知识库归属读取联动记忆。绑定的知识库断开时,页面说明原因并继续显示本地记录。请配合知识库插件 2.5.6 使用。

DSH Memory 1.0.12

Memory management now loads linked memories for historical sessions using their stored library ownership. If the bound library is disconnected, the page shows the reason and keeps local entries visible. Pair with the Knowledge Base plugin 2.5.6.

Build: 44fc0721108d3391

SHA-256: 5407605d57e9d88e8150a3a573ba1cd25b7abdcbdf49357629a1b85f4ab0ce29

1.0.11 · DSH Memory

Choose a tag to compare

@KingsleyAsher KingsleyAsher released this 07 Nov 09:23
ef14fab

DSH Memory 1.0.11

移除安装包误带的「DSH 记忆」专用 Agent 预设。记忆由全局插件为适用的普通预设挂载,纯净模式和明确关闭记忆的会话继续排除。记忆页面仍用于查看和管理已有记录。

保留 1.0.10 的 DSH 与 Cordis 兼容范围。隔离检查在 DSH 0.2.1-rc.5 和 0.2.2-rc.1 上使用普通预设,覆盖实际工具循环、保存、同次压缩、跨会话召回和恢复,模型输出使用离线桩。安装或更新后完全退出 DSH(含托盘)再打开。

DSH Memory 1.0.11

Remove the dedicated DSH Memory Agent preset accidentally shipped in 1.0.10. The global memory plugin serves eligible ordinary presets and respects pure mode and explicit memory opt-outs. The Memory page remains available to manage stored records.

Retains 1.0.10 host compatibility. Isolated tests use ordinary presets on DSH 0.2.1-rc.5 and 0.2.2-rc.1 and cover the tool loop, persistence, same-call compaction, cross-session recall and recovery with offline model fixtures. Fully exit the desktop app including the tray process and reopen after updating.

Build: 0647b4283bdf9c20

SHA-256: 5f5bab70708c372f6820704e6c5e8642493c8095c73ab0fb26c0c4a7981c287b

1.0.10 · DSH Memory

Choose a tag to compare

@KingsleyAsher KingsleyAsher released this 06 Nov 18:03
a016722

DSH Memory 1.0.10

修复升级 DSH 后插件被精确版本依赖阻止加载的问题。DSH 与所需官方包现在接受 0.2.1(从 rc.5 起)和 0.2.2(从 rc.1 起)系列,Cordis 接受 ~4.0.5 或 ~4.1.0;不自动放行 0.2.3 或 Cordis 4.2。

分别使用官方 0.2.1-rc.5 / Cordis 4.0.5 和本机安装归档中的 0.2.2-rc.1 / Cordis 4.1.0 运行隔离检查。两组均覆盖真实插件装载、Agent 工具调用、持久化、同次压缩、跨会话召回、项目隔离、工作进程重启与旧待办恢复;模型输出使用离线桩,不是付费或真实模型验证。新版独立的原生工具执行器由测试宿主正常加载,记忆插件不替换用户的执行器。

记忆数据目录与数据库格式保持不变,升级保留既有记录;纯净模式排除、严格保存回执和管理页面分阶段加载继续保留。新增可复用的双宿主检查脚本。精确检查结果和安装包摘要见 release-manifest.json。真实桌面进程完整重启后的运行状态仍需确认。

通过 DSH 插件管理器安装 local-dsh-memory-1.0.10.tgz,完全退出 DSH(含托盘)再打开,在记忆详情中确认 1.0.10。本版修正兼容声明,不依赖关闭宿主兼容检查或添加强制豁免。

DSH Memory 1.0.10

Fix plugin admission after DSH upgrades. Required DSH packages now accept the 0.2.1 series from rc.5 and the 0.2.2 series from rc.1. Cordis accepts ~4.0.5 or ~4.1.0. DSH 0.2.3 and Cordis 4.2 are not automatically admitted.

Isolated checks use official 0.2.1-rc.5 / Cordis 4.0.5 modules and the installed 0.2.2-rc.1 / Cordis 4.1.0 archive. Both exercise plugin loading, the real Agent tool loop, persistence, same-call compaction, cross-session recall, project isolation, worker restart and pending-work recovery. Model output is an offline fixture, not a paid or real-model evaluation. The newer host fixture loads its required native tool executor normally; the memory plugin does not replace the user's executor.

The data directory and database format remain unchanged. Existing memories, pure exclusion, strict save receipts and progressive management-page loading are preserved. A reusable dual-host test is included. See release-manifest.json for exact checks and archive identity. Full desktop-process restart and live activation remain to be confirmed.

Install local-dsh-memory-1.0.10.tgz through the DSH plugin manager, fully exit including the tray process, reopen and confirm 1.0.10 in Memory details. The fix uses supported dependency declarations instead of bypassing Host compatibility checks.

Build: cd1bee7505e1c875

SHA-256: f04e3937272e56ba418dae91b99bfadcee9d543983764ec88d11c2a90b53b5d1

1.0.9 · DSH Memory

Choose a tag to compare

@KingsleyAsher KingsleyAsher released this 06 Nov 17:52
f081f6a

DSH Memory 1.0.9

修复打开记忆管理页面时,本地记忆需要等待知识库联动读取完成的问题。本地列表立即返回,联动记录在后台取得完整快照后补入;新增加载状态,联动失败时仍可查看本地记录。

同一会话合并并发联动请求,最多保留八个会话的管理页快照,快照三十秒到期。联动变更通知和服务切换会使缓存及在途旧结果失效,避免旧内容重新出现。前端合并重复刷新,并保留内容未变时的列表身份。缓存仅用于管理页;正常对话召回仍读取实时快照。

验证:浏览器隔离页面使用虚构记录与固定三秒联动延迟,本地记录显示时间从 3489 毫秒降到 96 毫秒;这是该场景的一次测量,不是实际宿主耗时承诺。联动记录后续加载、项目范围切换通过,未发现页面运行错误。新增测试覆盖请求合并、会话隔离、缓存失效、过期、失败、不完整快照和服务移除;发布检查继续覆盖已有回归、包内容与公开边界。未发布私人数据库、聊天或本机测试资料。真实宿主安装并完整重启后的耗时未验证。

兼容要求沿用 1.0.8,以 package.json 的 peerDependencies 为准。通过 DSH 插件管理器安装 local-dsh-memory-1.0.9.tgz,完全退出宿主(含托盘)再打开,并在记忆详情中确认版本 1.0.9。构建号、摘要与测试数量见 release-manifest.json。

DSH Memory 1.0.9

Fix slow entry into memory management: the local list no longer waits for knowledge-library synchronization. It returns immediately, while complete linked snapshots appear afterward. Loading status is visible and local entries remain usable when the linked service fails.

The management-only loader coalesces concurrent requests per session, retains at most eight session snapshots and expires completed snapshots after thirty seconds. Provider notifications and replacement invalidate cached and in-flight results. The frontend coalesces refreshes and preserves unchanged list identity. Conversation recall still reads fresh snapshots.

Validation: an isolated browser page with synthetic records and a fixed three-second linked-service delay displayed local records in 96 ms versus 3489 ms before the change. This is one measurement of that scenario, not a live-host speed guarantee. Linked records later appeared, project scope switching passed and no page runtime errors occurred. New checks cover coalescing, session isolation, invalidation, expiry, offline/incomplete snapshots and provider removal; existing release regressions and archive/publication checks remain enabled. No private database, chat or machine-specific test materials are published. Performance after installing and fully restarting the live Host remains unverified.

Compatibility is unchanged from 1.0.8; see package.json peerDependencies. Install local-dsh-memory-1.0.9.tgz through the DSH plugin manager, fully exit including the tray process, reopen and confirm version 1.0.9 in Memory details. Build identity, digest and test counts are recorded in release-manifest.json.

Build: 5477f9f6317fe648

SHA-256: 79ae4b7c7554c9fb2c295b26202aa06325a46012462afb43e95562f519ee9d3d

1.0.8 · DSH Memory

Choose a tag to compare

@KingsleyAsher KingsleyAsher released this 06 Nov 17:32
95544ab

DSH Memory 1.0.8

本次发布汇总 1.0.5 之后尚未公开的修复,以及 2026-11-07 的记忆重试和关系网文字调整。

  • 记忆提交被拒绝、部分保存或抛出错误后,下一步提供新的批次合同;合同内容不变也不复用已经提交的回答。过期批次调用同样触发刷新。仍禁止改写旧批次的首次回答,保留原文和跨会话校验。
  • 路径字段只接受原文中的路径字面量;报错提示明确说明,应将默认位置和适用条件等完整约定另存为规则。仅工具回执 state=saved 且 can_confirm_saved=true 时确认保存。重启不会保证模型已重新提交或保存成功。
  • 关系网文字固定在节点旁,遮挡时虚化,遮挡解除后恢复。移除标签避让选位及牵引线,避免文字在重绘时跳动。保留节点旋转、缩放和选择交互。
  • 自动记忆所有者跨预设及工具服务域工作。pure 预设、会话 memoryEnabled=false 或 excludedPresets 中的预设不注入、不采集、不绑定记忆工具,并使用原压缩路径;已有记忆仍保留。
  • 增加可选微信会话作用域和聊天表达习惯项目存储接口。聊天风格档案标为模型推断,不作为全局事实;仅搭配支持接口的微信插件使用。此包不包含微信插件,也不训练模型。

兼容要求以 package.json 的 peerDependencies 为准:DSH 及相关官方包 0.2.1-rc.5、Cordis ~4.0.5。旧宿主不保证兼容。

发布检查使用虚构数据和隔离的本地 Python 工作进程,覆盖拒绝后新批次重试、旧回答不可改写、纯净排除、会话隔离及续步召回,并检查 JavaScript 语法、安装包往返和公开内容边界。未使用私人记忆库、真实聊天或付费模型。没有验证安装本发布包后完整重启的真实宿主表现,关系网的实际视觉效果也尚未人工验收。精确构建号、摘要和测试数量见 release-manifest.json。

通过 DSH 插件管理器安装 local-dsh-memory-1.0.8.tgz。保存当前工作后完全退出宿主(包括托盘)并重新打开,在记忆详情中确认版本 1.0.8。失败记忆可在原会话要求重新保存,并核对工具成功回执及记忆列表;不能只以助手口头复述判断入库。

DSH Memory 1.0.8

This release consolidates changes since public 1.0.5 and the November 7, 2026 submission-retry and graph-label fixes.

  • A dispatched submission consumes its immutable answer even when rejected. The next step exposes a fresh contract instead of reusing that batch when the request is unchanged. Stale calls also refresh the contract. Source checks, session ownership and first-response immutability remain enforced.
  • Path validation hints distinguish a literal path from the full rule and its conditions. Only state=saved with can_confirm_saved=true confirms a save. Restarting does not establish that a model has retried or saved a pending memory.
  • Graph labels keep a fixed offset from their nodes. Occluded labels blur and clear again when uncovered. Removed label relocation and leader lines; rotation, zoom and selection remain available.
  • One automatic runtime follows agents across preset and tool realms. The pure preset, memoryEnabled=false sessions and excludedPresets skip memory injection, collection, tool binding and augmented compaction. Existing records remain intact.
  • Optional WeChat conversation scopes and project style-profile storage isolate chats. Style profiles are identified as model inference rather than global facts and require a compatible WeChat plugin. This package contains no WeChat client or model training.

Compatibility follows package.json peerDependencies: DSH and related official packages 0.2.1-rc.5, Cordis ~4.0.5. Older hosts are not guaranteed compatible.

Release checks use synthetic data and isolated local Python workers for corrected retries, immutable old answers, pure exclusion, conversation isolation and tool continuation, plus JavaScript syntax, archive round-trip and publication scans. No private memory database, real chat or paid model was used. A full installed-host restart of this release and a visual acceptance check of the graph were not performed. Exact build identity, digest and test counts are in release-manifest.json.

Install local-dsh-memory-1.0.8.tgz through the DSH plugin manager. Save your work, fully exit the Host including its tray process, reopen it and confirm version 1.0.8 in Memory details. Retry failed memories in the original conversation and inspect both successful tool receipts and stored entries; an assistant's verbal acknowledgment is insufficient.

Build: d89690791734e24d

SHA-256: fa3b36f77bc6f281bdcbdd8fb1e4859cc8b4db249be0ec599af558fde000b47f

1.0.5 · DSH Memory

Choose a tag to compare

@KingsleyAsher KingsleyAsher released this 05 Nov 06:43

DSH Memory 1.0.5

修复工具调用完成后的记忆续步:DSH 步骤输入只包含本步新消息,原来在只有工具结果时可能以空证据快照替换已召回约定。现在从会话历史查找最近的真实用户任务,每步重新查询记忆;其他插件的 user 角色消息不能覆盖用户任务,删除、撤回及新任务切换仍然生效。

提示语区分历史资料和当前适用的用户偏好与工作约定,要求在计划及工具完成后的后续步骤中落实有效约定,不扩大条件或绕过授权。不引入后台自主执行器,不把所有历史记忆当作指令。

保留 1.0.4 的详情页、手动检查入口、静默自动更新和严格保存回执。中英文使用说明、项目记录、版本描述及下载链接同步到 1.0.5。

必要简查包括合成续步反例、真实本地 Python 工作进程的持久保存与召回、删除与任务切换、保存回执及已有发布检查;包内文件回读和公开内容扫描通过。没有使用私人记忆库、真实录音或外部付费接口,也未验证真实模型最终生成了笔记。更新源可见不等于当前宿主已经安装并重新加载。

自动更新沿用启动后约 15 秒和每 6 小时的检查,由宿主管理器安装;也可在“记忆 → 详情”主动检查。镜像可能延迟,更新器选择可用源中的最新有效版本,校验失败保留旧版。宿主要求重启时,保存工作并按提示重新加载后确认运行版本。

DSH Memory 1.0.5

Fix memory continuation after tool calls. DSH pre-step input contains only newly claimed messages; a tool-only continuation could replace recalled preferences with an empty evidence snapshot. Recall now uses the latest genuine user task from session history and queries current memory again at every step. User-role messages from other plugins cannot replace that task. Deletion, withdrawal and task changes remain effective.

Context guidance distinguishes historical evidence from applicable user preferences and work agreements. Current agreements should inform the plan and remaining steps after tool completion, within their conditions and authorization. This does not introduce an autonomous background executor or turn all historical text into instructions.

Retains the 1.0.4 details page, manual check, silent automatic updates and strict save receipts. Bilingual guides, project records, version descriptions and download links are synchronized to 1.0.5.

Focused synthetic checks cover the original continuation regression, persisted recall through a real local Python worker, deletion, task changes and save receipts, alongside the existing release checks. Archive round-trip and publication scans pass. No private memory database, real recording or paid API was used. Actual model-driven note creation and installation into the user's live Host were not verified.

The existing startup and six-hour checks remain active, with installation handled by the Host manager. A manual check is available under Memory → Details. Mirrors may lag; the updater selects the newest valid available release. Save work and reload when the Host requires it, then confirm the running version.

Build: 2aebd4004badabdc

SHA-256: 54eda2bb029f0d9b3c3fd32bacbda43249e33b91ad6ad16d0af76fba42067337

DSH Memory 1.0.4

Choose a tag to compare

@KingsleyAsher KingsleyAsher released this 04 Nov 16:06

DSH Memory 1.0.4

新增“记忆 → 详情”页:显示实际运行版本、手动检查更新、上次检查时间、各更新源状态、GitHub/Gitee/GitCode 仓库及问题反馈入口。启动后及每 6 小时的自动检查、符合条件的自动安装继续保留。

主动写入失败或部分保存时明确报工具错误,只有已保存回执允许确认成功;无歧义的句读差异恢复原文,单条遗漏引用可补齐,内容或数字变化仍拒绝。原始提交保持不可变,重试使用新批次。

Agent 预设不隔离记忆。全局记忆跨项目可用,项目记忆只随对应项目激活;切换预设、窗口或项目不删除记录。同项目旧版窗口编号可共享,明确清理仍生效。记忆页面默认全局条目,可切换项目记忆及关系网。

公开源码由合成测试、JavaScript 检查、更新器检查及安装包回读验证。详情页和自动安装调用已在隔离组件测试中验证;未将 1.0.4 安装到用户宿主,也未调用真实模型验证。此版本不保证模型永不误报或分类永远正确;跨范围相似记录不会自动语义合并。

三个更新源可能同步延迟;摘要、大小或构建号冲突会阻止安装。安装由宿主完成,若热重载报 root Include 错误,包文件可能已写入,需要完全退出宿主后重开确认版本;不要据此手改 cordis.yml。


DSH Memory 1.0.4

Memory → Details now shows the running version, manual update checks, check time, per-source status, every configured repository and issue reporting. Startup and six-hour automatic checks and eligible host-managed automatic installation remain enabled.

Unsuccessful or partial writes fail the tool explicitly. Confirmation requires a saved receipt. Unambiguous punctuation-only differences restore the literal source, and a single missing assertion reference may be bound deterministically. Changed content or numeric meaning remains rejected. Original responses are immutable; corrected retries use a new batch.

Agent presets share memory. Global records apply across projects; project records activate only for their project. Switching presets, windows or projects no longer erases records. Same-project legacy window scopes remain accessible, while explicit clearing still removes project records. The initial view shows global memory.

Synthetic core tests, JavaScript checks, updater checks and archive round trips validate this release. Details and automatic installation calls were tested in an isolated component with synthetic responses and a simulated host installer. This release was not installed in the user's host and was not evaluated with live model calls. It does not guarantee perfect model classification or truthful model wording in every future response. Similar records across scopes are not automatically merged.

Mirrors can lag; conflicting hashes, sizes or build identifiers block installation. If host hot reload reports a missing root Include, package files may already be installed; fully restart the host and verify its running version. Do not manually insert an Include into cordis.yml based only on that error.

DSH Memory 1.0.3

Choose a tag to compare

@KingsleyAsher KingsleyAsher released this 04 Nov 11:53

DSH Memory 1.0.3

新增 Gitee、GitCode 国内更新源。三个源并发检查,选择最新有效版本,同版本优先国内下载,失败切换;摘要、大小或构建号冲突阻止安装。所有较新正式版、预览版和跨主版本继续自动更新,保持无弹窗。

镜像同步可能延迟;单个源不可用时继续使用其他有效源。GitCode 使用官方文件API,Gitee使用raw地址。


DSH Memory 1.0.3

Adds Gitee and GitCode update sources. Concurrent checks select the newest valid version, prefer regional downloads and fall back on failure. Conflicting hashes, sizes or build IDs block installation. All newer channels and major versions remain automatic, without popups. Mirrors can lag; an unavailable source does not prevent use of other valid sources.