Repository navigation
Properties
Properties shows the settings of the selection, at the bottom right. With nothing selected, it says "Select an object in the 3D view or the Outliner."

A heading shows the type icon, the name and type · file (or "created in the app"). With several objects selected, it shows "N objects". Badges below the heading repeat the badges of the Outliner. They show why a projector is not analysed, and they show hidden, orphan and not-in-file objects.
Sections fold and unfold. The panel shows only the sections that every selected object has. A field that differs between the objects shows a dash.
A locked object shows a note, and its fields are disabled.

-
Click a field and type. Press
Enteror leave the field to commit. PressEscto drop the typed text. -
Drag left or right with the left mouse button to change the value. Right is up. Hold
Shiftfor a tenth of the step. HoldCtrlto snap. -
Middle mouse button: Value Ladder (as in TouchDesigner). Press the middle button on a field. A column of steps appears: 100, 10, 1, 0.1, 0.01. Integer fields show 100, 10, 1. Move up or down to pick a step. Then move sideways to change the value by that step. After a short sideways move, the step stays fixed. Release the button to commit. Press
Escto cancel. - On the label of a row with several values (Position, Shift), the ladder changes all values together.
- One drag is one undo step. The 3D view follows live while you drag.
- A drag stops at the allowed range of the field.
- With several objects selected, a drag in a transform field applies the same change to each object.

The fields are Name, Parent, Position, Rotation (with Yaw / Pitch / Roll and a Blender Euler row) and Scale. A node with a parent also shows its world position and angles. They are in a World sub-section, which is folded at first. Values are in metres and degrees. The axes follow the convention of Blender. For projectors, Aim at… aims the projector at a surface point that you click.
The Lens section holds most projector settings. These are the rows, from top to bottom:
- Colour: a 16-colour palette for the projector.
- Test pattern: the pattern that the projector draws.
- Image: see below.
- Model, with Change model….
- Copy: with two or more projectors selected, Copy specs… opens the Copy specs popover. Tick what to copy. For the zoom, choose "Same TR" or "Same image width".
- Spec sheet: a button that opens the maker's spec sheet.
- Lens: for interchangeable lenses. A lens that you cannot use shows the reason.
- Throw ratio: the maker's number. It sets the zoom.
- Wanted width (m) with Fit: Fit sets the zoom so that the image has that width at the aim distance.
- Lens range: the smallest and largest throw ratio of the lens.
- Shift H (%) and Shift V (%): lens shift.
- Mount: Floor or Ceiling.
- Light output (%): see below.
- Look through: shows the scene from the lens of the projector.



Zoom is optical zoom only. Throw and lens shift come from the projector database. Zoom and lens shift need projectors with the same model and lens. See Projector Database and Placing Projectors.
The Image row shows the name of the picture that this projector shows, or none. With several different pictures selected, it shows Mixed.
- Click Load… and choose a picture file.
- The app copies the file into the project and its snapshots.
- Click Remove to bring the test pattern back.
The picture replaces the test pattern of that projector. The Shaded view always shows it. The other views show it when Images is on (Viewport fold-out, Beams section). The app stretches the picture to the projector image, with no aspect fit. It shows the picture at up to 1024 pixels. A project with a projector image is saved as project format 5.0. See Project Files.
Light output (%) dims one projector. It lowers the rated lumens of that projector. The range is 1 to 100, and the default is 100. At 50, the analysis uses half of the rated lumens. The field changes the analysis numbers. There is no project-wide dimming field.
The Body section has the Flight frame checkbox and a note on the body model in use. See Physics Model.
The Readouts section appears when you select one projector. Its rows are:
- Aim distance
- Aims at
- Throw distance (maker)
- Throw ratio (centre)
- Image W × H
- Centre: the illuminance at the image centre, in lx
- Pixel: the pixel size
- Φ_eff: the effective lumens
Under the rows are flag chips that explain caveats. Click a chip to read its explanation.



- Role: Target (the surface should be lit and counted), Occluder (it blocks light) or Helper (light passes through it).
- Reflectance (new in 1.1.0): the reflectance ρ of the surface, from 0 to 1. The Photometric view uses it for Luminance. See Physics Model. Type a number, or pick a typical value from the list.
- Triangles: the number of triangles.
- UVs: yes or no.
The list of Reflectance has these values: white paint 0.80, light plaster 0.45, sandstone 0.30, concrete 0.25, granite 0.22 and red brick 0.12. The entry Project default removes the own value of the object. The object then follows the Default ρ of the Photometric legend, which is 1.00 until you change it. Each choice is one undo step. A project with a reflectance is saved as project format 5.0.

The section shows Source and Size. Click Load… to put a picture on the selected surfaces. Click Clear to return to the texture of the model file. Select the root row of a model to list the textures of that model. See Textures.
The fields are Height (m) and Blocks light. See People.

The fields are Projection (Perspective or Orthographic), Field of view (or Ortho height), Position and Target. Two buttons are Look through and Update from view. Update from view stores the current 3D view in this camera.

With only measurements selected, Properties shows Name, the ends A and B, Value, Axis, Show in, Text and the full Style. With objects and measurements selected, the sections of the objects stay. A note counts the measurements. See Measure Tools.

This section is for objects that come from a model file. It shows File and Key. It shows Reset to file when the placement differs from the file.
See also: Measure Tools, Outliner, Placing Projectors, Textures, Summary and History
Getting started
Interface
Workflow
- Blender Export and Import
- Placing Projectors
- Analysis
- Variations and Compare
- Measure Tools
- Textures
- People
- Report and PDF
- Share a view-only scene
- Test Patterns
Reference
Download and legal
© 2026 LumaLux