Repository navigation
v3.9.0
Pre-release
Pre-release
Lets other Pods opt in to capacitance presence, quiets System status, and adds a Wi-Fi reconnect and an option to keep the system log in memory.
Features
- Settings > Features > Capacitance presence on other Pods (beta), off by
default: on a Pod other than a Pod 5, presence follows the capacitance
sensors of New sleep tracking once the nightly analysis has learned both
sides. Checked against recorded nights from one Pod 3. By @Ali-Al1. - Settings > Features > Keep the system log in memory, off by default, keeps
the systemd journal in RAM from the next restart to save flash wear. It
keeps only the most recent 64 MB and clears when the Pod restarts;
Nightstand's own logs are kept. Turning it off puts the log back on flash
at the next restart. - The network watchdog tries one Wi-Fi reconnect after 3 minutes offline,
before any restart: once per outage, at most 3 a day, and not after a
driver crash or while an update runs. It runs on any Pod with the stock
Wi-Fi driver. - The hardware watchdog turns on for Pod 5 hubs from revision G43 up to, but
not including, I00, and System status shows whether it is on. The network
watchdog remembers a Wi-Fi driver crash until the next restart.
Fixes
- Firmware health lists firmware events instead of the Pod's routine
reprints, and a paused stream shows "No recent readings" unless the
firmware reports a fault. - System status says "Off" for a firmware target that is off and "Side is
off." for a side that is off, and hides the Cover buttons row on a Pod 5
hub, where it does nothing. - A hub or cover revision past the range seen on a Pod 5 is no longer treated
as a Pod 5. - The biometrics stream's routine status check no longer fills the server
log.
Checked on: Pod 5, deployed from this code: System status, firmware health across sensor resets, the hardware and network watchdogs (dry run), and the log switch turned on and off; the log in memory across one restart; Wi-Fi reconnect after one deliberate disconnect; not on other Pod 5 hub revisions, a real Wi-Fi outage, or other Pods; capacitance presence replayed on Pod 3 nights only; no nights yet.
Checked before release
- CI: https://github.com/LTimothy/nightstand/actions/runs/44232871935, all checks passed.
- Hardware: one Pod 5, 2026-11-17: this code deployed over the network before the version bump; System status, firmware health across sensor resets, the hardware watchdog row, the network watchdog dry run and the system log switch turned on and off were checked on the running Pod; the log in memory was checked across one restart, and the Wi-Fi reconnect command after one deliberate disconnect. The revision caps were added afterwards and are covered by tests only.
- Nights on the maintainer's Pod before stable: not yet.
- Not checked: Pod 3 and Pod 4; other Pod 5 hub revisions; a real Wi-Fi outage or driver crash; updating to 3.9.0 in the app; capacitance presence on a real Pod 3 or Pod 4 (replayed Pod 3 nights only).