Repository navigation
Releases
Releases · LinkPass888/CarCanvas
CarCanvas v2.1.2
简体中文
变更
- 高对比自适应裁切框。 重新设计裁切框,加入双色高对比边框、四角加粗角标与三分法九宫格参考线,画布底台与框外 50% 半透明遮罩跟随系统浅色/深色模式自适应,在纯白、纯黑及复杂图案壁纸上均清晰可见,同时高亮当前匹配的尺寸/比例按钮。
- 优化裁切拖动跟手度。 裁切蒙版静态缓存免重绘,并将拖动手势起始阈值降至 1pt,消除起手顿挫感。
- 发版安装包附带版本号。 构建并发布的未签名安装包文件名改为
CarCanvas-v<版本号>-unsigned.ipa(如CarCanvas-v2.1.2-unsigned.ipa)。
English
Changed
- High-contrast adaptive crop frame. Redesigned the crop overlay with dual-contrast borders, bold corner brackets and rule-of-thirds guides over an adaptive light/dark stage and 50% outer scrim, staying legible across pure white, pure black and busy wallpapers while highlighting the active size or ratio preset.
- Smoother crop dragging. Cached the static crop overlay during gestures and lowered the drag activation threshold to 1pt to eliminate initial stutter.
- Versioned release IPA filename. Packaged unsigned IPA artifacts now include the version string (
CarCanvas-v<version>-unsigned.ipa, e.g.CarCanvas-v2.1.2-unsigned.ipa).
日本語
変更
- 高コントラストな自動適応トリミング枠。 二重コントラストの枠線、四隅の太線コーナー、三分割グリッドを追加し、背景と枠外の 50% 半透明マスクをシステムのライト/ダークモードに合わせて自動切り替え。白一色・黒一色・複雑な柄の壁紙でも見やすくし、選択中のサイズ/比率ボタンを強調表示します。
- ドラッグ操作の滑らかさを改善。 トリミングオーバーレイの再描画を抑え、ドラッグ開始のしきい値を 1pt に下げることで動かし始めの引っかかりを解消しました。
- リリース IPA ファイル名にバージョンを付与。 未署名 IPA のファイル名を
CarCanvas-v<バージョン>-unsigned.ipa(例:CarCanvas-v2.1.2-unsigned.ipa)に変更しました。
CarCanvas v2.1.1
简体中文
- 裁切分辨率记忆:确认自定义像素尺寸或比例预设后会记住该分辨率,下次打开及重启应用后自动恢复;选择 系统尺寸 并确认可清除记忆,恢复跟随各文件的系统分辨率。
- 裁切框、比例预设与输入兼容:修复极窄竖屏比例下预览框溢出的问题,避免反复切换比例预设导致分辨率逐次缩水,并兼容粘贴空白字符与全角数字输入。
- 超宽全景图支持:单边超过 16384 像素的原图会自动安全降采样,不再于预览成功后确认失败。
- 重载遮罩防卡死:应用退至后台时自动关闭重载遮罩,避免锁屏返回后重复触发注销;若 5 秒内未触发界面重载,右上角提供 关闭 按钮。
- 暂存文件大小与版本号显示:待应用修改同步显示暂存后的真实文件大小,选图准备阶段显示加载提示,设置页改为动态读取当前版本号。
English
- Remembered crop resolution: Confirming a custom pixel size or aspect-ratio preset saves that resolution for subsequent crops across launches. Confirming System size clears the saved resolution and restores per-file defaults.
- Crop frame, presets and CJK input: Narrow portrait ratios no longer overflow the preview area, switching between aspect-ratio presets no longer shrinks the resolution, and full-width digits or pasted spaces are accepted.
- Panoramic photo support: Source images wider or taller than 16,384 pixels are downsampled cleanly instead of failing on confirmation.
- Reload overlay recovery: The interface-reload overlay stops when backgrounded so returning from the lock screen does not re-trigger it, and exposes a Close button after 5 seconds if the reload does not occur.
- Accurate staged metadata and version display: Pending edits show their staged byte size, photo preparation displays a loading state, and Settings reads the live app version instead of a stale label.
日本語
- トリミング解像度の記憶:カスタムピクセルサイズや比率プリセットで確定するとその解像度を保存し、次回以降や再起動後も自動で復元します。システムのサイズを選んで確定すると記憶を消去し、ファイルごとの既定サイズに戻ります。
- トリミング枠・比率プリセット・入力の改善:極端な縦長比率でプレビュー枠がはみ出す問題と、比率プリセットを切り替えるたびに解像度が少しずつ縮む問題を修正し、全角数字や空白付きの貼り付けにも対応しました。
- パノラマ写真の対応:長辺が 16,384 ピクセルを超える元画像でも確定時に失敗せず、安全に縮小して書き出します。
- 再読み込み画面の復帰:バックグラウンド移行時にオーバーレイを自動で閉じてロック画面からの復帰後に再実行されるのを防ぎ、5 秒経っても再読み込みされない場合は 閉じる ボタンを表示します。
- 一時保存サイズとバージョン表示:保留中の変更で一時保存データの実際のファイルサイズを表示し、写真の読み込み中に待機表示を追加、設定画面のバージョン表記を動的に取得するよう修正しました。
CarCanvas v2.1.0
简体中文
- 自定义裁切尺寸:裁切框上方新增两个像素输入框,默认填入系统壁纸分辨率,可改为车辆 CarPlay 窗口尺寸;尺寸无效时无法确认。
- 常见比例预设:裁切框下方提供 16:9、9:16、4:3、3:4、1:1、21:9、8:3 等比例。
- 显示实际分辨率:每个壁纸的元数据行依次显示文件大小、壁纸实际分辨率和待应用状态。
- 日志保留更久:切换到后台不再清除内存日志,仅在应用退出时清除,便于复制排查。
- 兼容性说明:CarPlay 最多只缓存 6 个壁纸;受当前沙箱能力限制,无法读取 CarPlay 的配对记录,因此不再按车机区分缓存,所有缓存统一列出。
English
- Custom crop size: Two pixel inputs above the crop frame, prefilled with the system wallpaper resolution and editable to the vehicle's CarPlay window size. An invalid size disables confirmation.
- Common ratio presets: 16:9, 9:16, 4:3, 3:4, 1:1, 21:9 and 8:3 are offered below the frame.
- Actual resolution shown: Each wallpaper's metadata row lists the file size, its true resolution and the pending status in that order.
- Logs survive backgrounding: The in-memory log is no longer cleared when the app goes to the background, only when it terminates, so it can still be copied out for troubleshooting.
- Compatibility notes: CarPlay caches at most six wallpapers. The current sandbox capability cannot read CarPlay's pairing record, so caches are no longer separated by vehicle and are listed together.
日本語
- カスタムトリミングサイズ:トリミング枠の上に 2 つのピクセル入力欄を追加し、既定値はシステムの壁紙解像度です。車の CarPlay 表示領域のサイズに変更できます。無効なサイズでは確定できません。
- 一般的な比率のプリセット:枠の下に 16:9、9:16、4:3、3:4、1:1、21:9、8:3 を用意しました。
- 実際の解像度を表示:各壁紙のメタデータ行にファイルサイズ、実際の解像度、保留中の状態をこの順に表示します。
- ログの保持時間を延長:バックグラウンドに移動してもメモリ上のログを消去せず、アプリ終了時のみ消去します。調査用にコピーできます。
- 互換性の注意:CarPlay のキャッシュは最大 6 枚です。現在のサンドボックス機能では CarPlay のペアリング記録を読み取れないため、車載機ごとの区別をやめ、すべてのキャッシュをまとめて表示します。
CarCanvas 2.0.2
中文
- 新增壁纸裁剪:选图后可拖动照片选择保留区域,确认后仅暂存,仍由“应用”统一写入。
- 裁剪按原壁纸的像素宽高输出,统一等比填满处理,避免拉伸变形;暂存预览与裁剪结果一致。
English
- Added wallpaper cropping after photo selection. Drag the photo to choose which area to keep; confirmation stages the crop, while Apply writes the pending changes.
- Cropped wallpapers preserve the original wallpaper's pixel dimensions. Consistent aspect-fill rendering avoids distortion, and staged previews reflect the crop.
日本語
- 写真選択後の壁紙トリミングに対応。写真をドラッグして残す範囲を選び、確定すると変更を一時保存します。「適用」でまとめて書き込みます。
- 元の壁紙と同じピクセル寸法で出力し、縦横比を維持して領域を埋めるため、引き伸ばしによる歪みを防ぎます。一時保存のプレビューもトリミング結果と一致します。
CarCanvas v2.0.1
简体中文
本次为非必要更新,可按需升级。
- 兼容性调整:支持提示更新至 iOS 27.2.1;放行 27.3(含 Beta 1)的壁纸操作,同时保留原有不支持提示。
- 完善首次启动引导:应用内教程与 README 统一为五步简版,首次安装后打开自动展示。
English
This is an optional update. Upgrade as needed.
- Compatibility update: The supported-version label is updated to iOS 27.2.1. Wallpaper operations are allowed on iOS 27.3, including Beta 1, while the existing unsupported-version warning remains.
- Improved first-launch guide: The in-app tutorial now matches the simplified five-step README guide and appears automatically on the first launch after installation.
日本語
任意のアップデートです。必要に応じて更新してください。
- 互換性の調整:対応範囲の表示を iOS 27.2.1 まで更新。iOS 27.3(Beta 1 を含む)での壁紙操作を許可し、従来の非対応表示は維持します。
- 初回起動ガイドの改善:アプリ内の手順を README と同じ簡潔な5ステップに統一し、インストール後の初回起動時に自動表示します。
CarCanvas v2.0.0
简体中文
- 完整开源重写:提供 Swift、SwiftUI 与 Objective-C 源码工程,替代仅分发预编译 IPA 的旧版,并接入 GitHub Actions 自动构建。
- 更换底层后端:使用 worse_query 替代 MobileHouseArrest / FilzaSlop,重写 CarPlay 容器定位、授权与缓存访问逻辑;旧版 iOS 不再支持。
- 重构壁纸写入链路:按目标文件生成 CPBitmap,支持修改暂存与统一应用、写后校验、失败文件回滚及重试,保留已成功写入的修改。
- 新增原始缓存备份与恢复:自动增量备份新发现的缓存,支持单文件及统一恢复;清除缓存时同步清除备份和修改状态。
English
- Full open-source rewrite: A complete Swift, SwiftUI and Objective-C project replaces the previous prebuilt-IPA-only distribution, with automated GitHub Actions builds.
- New backend: worse_query replaces MobileHouseArrest / FilzaSlop, with rewritten CarPlay container discovery, authorization and cache access. Older iOS versions are no longer supported.
- Reworked wallpaper write pipeline: Generates CPBitmap data for each target file, stages changes for unified application, verifies writes and supports rollback and retry of failed files without undoing successful changes.
- Original-cache backup and restore: Automatically backs up newly discovered cache files incrementally, supports per-file and unified restoration, and clears backups and edit state when the wallpaper cache is cleared.
日本語
- 完全なオープンソースへの書き直し:従来のビルド済み IPA のみの配布から、Swift・SwiftUI・Objective-C の完全なソースプロジェクトへ移行し、GitHub Actions の自動ビルドを導入しました。
- バックエンドの変更:MobileHouseArrest / FilzaSlop を worse_query に置き換え、CarPlay コンテナの検出、権限取得、キャッシュへのアクセスを再実装しました。旧版 iOS は非対応となります。
- 壁紙の書き込み処理を再構築:対象ファイルごとに CPBitmap を生成し、変更の一時保存と一括適用、書き込み後の検証、失敗したファイルのロールバックと再試行に対応します。成功した変更は保持します。
- 元のキャッシュのバックアップと復元:新しく見つかったキャッシュを差分バックアップし、個別・一括の復元に対応します。キャッシュの削除時にはバックアップと変更状態も削除します。