Repository navigation
Module Parameters All
Generated from the module_param*() declarations and MODULE_PARM_DESC() texts of open-tx-isp next (2026-11-14, driver/<soc>/); the curated explanation of the parameters that matter is on Module Parameters. Default is the initial value of the variable in the source (the declaration just above the module_param); a few parameters are overwritten at load time by SoC code, and callback parameters (module_param_cb) show "see source". Perm is the sysfs permission (0 = not in sysfs, 0444 read-only, 0644 writable at run time under /sys/module/<module>/parameters/). Parameters marked bring-up exist only in a build with the SoC's TX_ISP_<SOC>_BRINGUP_PARAMS=y switch (not in firmware images; they are listed by name at the end of each SoC section). T10 is built from the T20 sources. Read-only counters and telemetry (*_now, *_last_*, *_hits, ...) are included. A 3.10 kernel refuses to load a module given an unknown parameter, so only pass names that this list shows for the SoC.
62 parameters in a default build, 0 more in a bring-up build.
| Parameter | Type | Perm | Default | Description |
|---|---|---|---|---|
isp_clk |
int | 0 (not in sysfs) | 90000000 / ISP_CLK_1080P_MODE | isp core clock |
isp_mmap_pool_kb |
uint | 0444 | 0 | V4L2 MMAP frame pool in KiB (default 0: none, USERPTR only; 8192 fits 2x1080p NV12 + sub-streams) |
qbuf_guard |
bool | 0644 | 1 | Reject framechan QBUF buffers outside rmem (default 1) |
t10_runtime_trace |
int | 0644 | 0 | 1: log T10 IRQ/I2C/top-IRQ progress traces |
t20_ae_flip_guard |
bool | 0644 | 1 | hold a one-step AE correction-curve change until the exposure moved 1/16 stop (beyond vendor, default on; 0 = vendor) |
t20_ae_last_curve |
uint | 0444 | 0 | |
t20_ae_last_exposure_log2 |
int | 0444 | 0 | |
t20_ae_last_isp_dgain_log2 |
int | 0444 | 0 | |
t20_ae_last_mean |
uint | 0444 | 0 | |
t20_ae_last_population |
uint | 0444 | 0 | |
t20_ae_last_raw_target |
uint | 0444 | 0 | |
t20_ae_last_target |
uint | 0444 | 0 | |
t20_antifog_ignored |
uint | 0444 | see source | anti-fog requests that found the Iridix block disabled |
t20_antifog_level |
uint | 0444 | 0 | last accepted anti-fog level (0 off, 1 strong, 2 medium, 3 weak) |
t20_antifog_variance |
uint | 0644 | 0 | 1: the anti-fog presets also write the Iridix variance nibbles (0x3c8) at the frame-start commit; 0 (default): strength only |
t20_awb_fallback_updates |
uint | 0444 | 0 | |
t20_awb_feedback_ready |
bool | 0444 | 0 | |
t20_awb_last_bg |
uint | 0444 | 0 | |
t20_awb_last_blue_q8 |
uint | 0444 | 0x100 | |
t20_awb_last_color_temperature |
uint | 0444 | 5000 | |
t20_awb_last_gain_00 |
uint | 0444 | 0x100 | |
t20_awb_last_gain_01 |
uint | 0444 | 0x100 | |
t20_awb_last_gain_10 |
uint | 0444 | 0x100 | |
t20_awb_last_gain_11 |
uint | 0444 | 0x100 | |
t20_awb_last_population |
uint | 0444 | 0 | |
t20_awb_last_red_q8 |
uint | 0444 | 0x100 | |
t20_awb_last_rg |
uint | 0444 | 0 | |
t20_awb_stable_ae_frames |
uint | 0444 | 0 | |
t20_ccm_frame_updates |
uint | 0444 | 0 | |
t20_ccm_last_light_source |
uint | 0444 | 3 | |
t20_cmos_irq_stage |
uint | 0644 | 9 | temporary T20 bring-up limit for the CMOS frame-start path |
t20_frame_end_stage |
uint | 0644 | 9 | temporary T20 bring-up stage gate for frame-end IRQ processing |
t20_fsm_event_allow_mask |
uint | 0644 | 0x3fff | temporary T20 bring-up mask for queued firmware event consumers |
t20_fsm_irq_allow_mask |
uint | 0644 | 0xff | temporary T20 bring-up mask for firmware IRQ consumers |
t20_iridix_asymmetry_shape |
uint | 0444 | 0 | |
t20_iridix_asymmetry_signature |
uint | 0444 | 0 | |
t20_iridix_last_exposure_factor |
int | 0444 | 0 | |
t20_iridix_last_full_strength_exposure |
uint | 0444 | 0 | |
t20_iridix_last_hist_factor |
int | 0444 | 0 | |
t20_iridix_last_maximum |
uint | 0444 | 0 | |
t20_iridix_last_minimum |
uint | 0444 | 0 | |
t20_iridix_last_no_strength_exposure |
uint | 0444 | 0 | |
t20_iridix_last_target |
uint | 0444 | 0 | |
t20_iridix_lut_init_count |
uint | 0444 | 0 | |
t20_iridix_lut_mode |
uint | 0444 | 0 | |
t20_iridix_rec709torgb_shape |
uint | 0444 | 0 | |
t20_iridix_rec709torgb_signature |
uint | 0444 | 0 | |
t20_iridix_rgb2rec709_shape |
uint | 0444 | 0 | |
t20_iridix_rgb2rec709_signature |
uint | 0444 | 0 | |
t20_irq_allow_mask |
uint | 0644 | 0xffff | temporary T20 bring-up mask for ISP-core interrupt dispatch |
t20_mesh_scale_cur |
uint | 0444 | 0xff | lens-shading scale last written by SetMeshShadingScale (255 = none) |
t20_park_fw_after_first_pass |
bool | 0644 | 1 | park the recovered T20 firmware thread after its proven-good first pass (only with t20_simple_awb=1) |
t20_runtime_trace |
int | 0644 | 0 | 1: log T20 IRQ/I2C/top-IRQ progress traces |
t20_sensor_rearm_count |
uint | 0444 | 0 | |
t20_sensor_rearm_writes |
uint | 0444 | 0 | |
t20_simple_ae |
bool | 0644 | 1 | use bounded histogram AE instead of the recovered OEM AE state graph |
t20_simple_awb |
bool | 0644 | 1 | use bounded metering feedback instead of the recovered OEM AWB state graph |
t20_simple_awb_static_only |
bool | 0644 | 0 | hold the four active IQ static-WB gains for bounded AWB diagnostics |
t20_simple_nr |
bool | 0644 | 1 | apply gain-driven ISP denoise from the active IQ calibration tables |
t20_simple_sharpen |
bool | 0644 | 0 | always apply gain-driven ISP sharpening from the compact AE (it already runs whenever the firmware thread is parked) |
t20_trace |
int | 0644 | 0 | 1: log the T20TRACE bring-up trace lines |
t20_trace_events |
int | 0644 | 0 | trace T20 firmware event dispatch |
15 parameters in a default build, 0 more in a bring-up build.
| Parameter | Type | Perm | Default | Description |
|---|---|---|---|---|
adr_bypass |
int | 0644 | 0 | T21: force TOP bypass bit 4 (ADR) off (diagnostic, default 0) |
awb_ir_freeze |
uint | 0644 | 1 | T21: freeze AWB in night mode and restore the day gains on return to day (default 1, 0 = stock) |
awb_lux_hyst |
uint | 0644 | 10 | T21: AWB lux/low-light threshold hysteresis band in percent (default 10, 0 = stock) |
ct_event_thresh |
uint | 0644 | 50 | T21: skip the CT->CCM/LSC update while the AWB CT moved by at most this many Kelvin (default 50, 0 = stock: every frame) |
free_watch |
bool | 0444 | 0 | |
irqoff_max_us |
uint | 0644 | 0 | T21 debug: max IRQs-off time of the ISP event thread in us (irqoff_stat=1; write 0 to reset) |
irqoff_stat |
bool | 0644 | 0 | T21 debug: measure the max IRQs-off time of the ISP event thread (default 0) |
isp_clk |
int | 0 (not in sysfs) | 100000000 | isp clock freq |
print_level |
int | 0 (not in sysfs) | 1 | isp print level |
qbuf_guard |
bool | 0644 | 1 | Reject framechan QBUF buffers outside rmem (default 1) |
t21_sensor_rearm_count |
uint | 0444 | 0 | |
t21_sensor_rearm_writes |
uint | 0444 | 0 | |
t21_sensor_write_always |
int | 0644 | 0 | 1 queues the sensor exposure/gain every frame even when unchanged (default 0: only on change, as stock) |
t21_sensor_writes_skipped |
uint | 0444 | 0 | |
warn_stack |
bool | 0644 | 0 | 1: dump_stack() after level>=2 ISP messages (vendor behaviour) |
94 parameters in a default build, 109 more in a bring-up build.
| Parameter | Type | Perm | Default | Description |
|---|---|---|---|---|
ae_oem_debug |
bool | 0644 | 0 | log the lifted stock AE0's exposure and gain changes |
algo_get_wait |
bool | 0644 | 1 | custom AE/AWB get-handle ioctls wait for the next AE/AWB run (default 1); 0 = stock: answer at once |
awb_lum_th_last |
uint | 0444 | 0 | last 0xb038 value written by the AWB interrupt |
awb_lum_th_runs |
uint | 0444 | 0 | AWB interrupts that rewrote 0xb038 (stock tiziano_awb_set_lum_th_freq) |
bypass_frames |
uint | 0444 | 0 | frames completed by the bypass graph (read only) |
bypass_lost |
uint | 0444 | 0 | bypass graph frame-done interrupts without a buffer owner (read only) |
chan_drain_ticks_max |
uint | 0444 | 0 | longest STREAMOFF drain wait in 10 ms steps (read only) |
chan_drain_timeouts |
uint | 0444 | 0 | STREAMOFF drain waits that ended with buffers still queued (read only) |
chan_drain_waits |
uint | 0444 | 0 | STREAMOFF drain waits that found buffers queued in the hardware (read only) |
chan_stop_drain |
uint | 0644 | 21 | STREAMOFF: wait up to N x 10 ms for the channel's queued buffers to complete (default 21 = stock, 0 off) |
chan_stop_keep_input |
bool | 0644 | 1 | 1 (default, stock): keep the input running after the last frame channel STREAMOFF while tx-isp is streaming; 0 stop it (debug) |
clk_name |
charp | 0 (not in sysfs) | 0 | select the isp parent clock |
clka_name |
charp | 0 (not in sysfs) | 0 | select the axi bus parent clock |
crumb_addr |
uint | 0644 | 0 | crumbs=2: physical address of the crumb page (outside kernel RAM) |
crumb_phys |
uint | 0444 | 0 | physical address of the attached crumb page (read only, 0 = none) |
crumbs |
int | 0644 | 0 | hang step markers: 0 off (default), 1 rmem page after the MDNS buffer, 2 page at crumb_addr |
direct_mode |
int | 0 (not in sysfs) | 0 | isp direct mode |
fcrop_upscale_pct |
uint | 0644 | 0 | front crop: allowed MSCA upscale in percent (0 = none, capped at 100) |
isp_bypass_graph |
int | 0444 | 0 | Enable the vendor ISP bypass graph (link config 1: raw RG12 frames from the VIC on frame channel 0) (default: 0) |
isp_ch0_pre_dequeue_interrupt_process |
int | 0 (not in sysfs) | 0 | isp pre dequeue interrupt process |
isp_ch0_pre_dequeue_time |
int | 0 (not in sysfs) | 0 | isp pre dequeue time, unit ms |
isp_ch0_pre_dequeue_valid_lines |
int | 0 (not in sysfs) | 900 | isp pre dequeue valid lines |
isp_ch1_dequeue_delay_time |
int | 0 (not in sysfs) | 0 | isp pre dequeue time, unit ms |
isp_clk |
int | 0 (not in sysfs) | 153000000 | isp clock freq |
isp_clka |
int | 0 (not in sysfs) | 416000000 | isp aclock freq |
isp_day_night_switch_drop_frame_num |
int | 0 (not in sysfs) | 0 | isp day night switch drop frame number |
isp_memopt |
int | 0 (not in sysfs) | 0 | isp memory optimize |
isp_osd |
bool | 0644 | 1 | write ISP OSD pictures into the MSCA per frame (1, default) or only store them (0) |
ivdc_mem_line |
int | 0 (not in sysfs) | 0 | ivdc mem line |
ivdc_threshold_line |
int | 0 (not in sysfs) | 0 | ivdc threshold line |
mask_commits |
uint | 0444 | 0 | |
mdns_ref_hold |
callback | 0644 | see source (callback) | MDNS reference weight hold bitmask, default 0 = driver computed: 1 luma/chroma ref weight max (0x799c/0x7a6c), 2 fake/mv weight max, 4 r_max/r_min max |
msca_fifo_rearm |
bool | 0644 | 0 | 1: clear and refill a stopped channel's MSCA address FIFO at STREAMON (default 0 = stock, debug) |
msca_flip_skip_noop |
bool | 0644 | 1 | 1 (default): no MSCA update request for unchanged mirror/flip bits; 0 always (debug) |
msca_flip_state |
callback | 0444 | see source (callback) | read-only: flip done by sensor/ISP, bits 0 sensor_h, 1 sensor_v, 2 isp_h, 3 isp_v |
msca_geom_rejects |
uint | 0444 | 0 | set-format / front crop requests refused for an MSCA geometry that stalls the output (read only) |
msca_keep_enabled |
int | 0644 | 2 | STREAMOFF: 0 clear MSCA enable bit, 1 keep when the input stops too, 2 always keep (default, stock) |
msca_rel_origin |
bool | 0644 | 1 | write the channel window origin relative to the global MSCA window |
msca_releases |
uint | 0444 | 0 | MSCA outputs released at a tx-isp session start (read only) |
msca_restart_skip |
bool | 0644 | 1 | 1 (default): no MSCA reload on STREAMON of a still-enabled output with unchanged geometry; 0 reload (debug) |
msca_scratch |
bool | 0644 | 1 | 1 (default): STREAMOFF parks a kept MSCA output on a scratch area in the ISP buffer; 0 off (debug) |
msca_scratch_bytes |
uint | 0444 | 0 | size of the MSCA scratch area (read only) |
msca_scratch_deferred |
uint | 0444 | 0 | QBUFs of a parked channel held back until its STREAMON (read only) |
msca_scratch_frames |
uint | 0444 | 0 | MSCA completions into the scratch area (read only) |
msca_scratch_parks |
uint | 0444 | 0 | STREAMOFFs that parked the output on the scratch area (read only) |
msca_scratch_phys |
uint | 0444 | 0 | physical address of the MSCA scratch area (read only, 0 = none) |
msca_scratch_settle_ticks_max |
uint | 0444 | 0 | longest wait for parked scratch addresses before an input stop, 10 ms steps (read only) |
msca_scratch_settle_timeouts |
uint | 0444 | 0 | input stops that found a scratch address still in an address FIFO after the wait (read only) |
msca_scratch_skips |
uint | 0444 | 0 | STREAMOFFs that wanted to park but had no (large enough) scratch area (read only) |
msca_session_release |
bool | 0644 | 1 | 1 (default): tx-isp STREAMON with the input stopped switches off MSCA outputs left enabled and clears their FIFOs; 0 off (debug) |
osd_busy_skips |
uint | 0444 | 0 | |
osd_commits |
uint | 0444 | 0 | |
print_level |
int | 0 (not in sysfs) | 1 | isp print level |
qbuf_cache_inv |
bool | 0644 | 1 | 1 (default, stock): invalidate the buffer's cache lines at QBUF; 0 off (debug) |
qbuf_guard |
bool | 0644 | 1 | Reject framechan QBUF buffers outside rmem (default 1) |
snapraw_buffer_bytes |
uint | 0444 | 4 * 1024 * 1024 | bytes of DMA memory allocated per snapraw capture (lazily) |
snapraw_phys_addr |
uint | 0444 | 0 | physical base of a caller-reserved snapraw DMA region |
source_adr_dynamic |
bool | 0644 | 0 | |
source_adr_internal_enable |
bool | 0644 | 0 | |
source_adr_oem |
bool | 0444 | see source | run the stock dynamic ADR and defog lifted from the OEM module (default 1); 0 = the static C ADR/defog |
source_ae_compensation |
uint | 0444 | 128 | |
source_ae_force_packed |
uint | 0644 | 0 | |
source_ae_hlil |
bool | 0644 | 1 | |
source_ae_hlil_interval |
uint | 0644 | 32 | |
source_ae_hlil_luma |
uint | 0444 | 0 | |
source_ae_hlil_target |
uint | 0644 | 60 | |
source_ae_oem |
bool | 0444 | see source | run the stock AE0 algorithm lifted from the OEM module (default 1); 0 = the HLIL AE substitute (needs reload) |
source_ae_stats_init |
bool | 0644 | 1 | |
source_af |
bool | 0444 | see source | T23 AF statistics chain of the stock module: AF block, interrupt and the GetAfHist/SetAfHist/GetAfWeight/SetAfWeight/GetAFMetrices/GetAfZone controls (default 1 = stock, 0 off) |
source_awb_hlil |
bool | 0644 | 1 | |
source_awb_hlil_interval |
uint | 0644 | 1 | run the AWB on every Nth AWB statistics interrupt (default 1 = every one, like stock; 0 = every one) |
source_awb_hlil_runs |
uint | 0444 | 0 | |
source_awb_hlil_status |
uint | 0444 | 0 | |
source_awb_hlil_updates |
uint | 0444 | 0 | |
source_awb_last_bgain |
uint | 0444 | 0x858 | |
source_awb_last_rgain |
uint | 0444 | 0x820 | |
source_awb_lum_th |
bool | 0644 | 1 | stock per-interrupt AWB luminance threshold 0xb038 from the AE mean (default 1); 0 = fixed startup value |
source_bcsh_trace |
bool | 0644 | 0 | |
source_ccm_tuning_init |
bool | 0644 | 1 | |
source_core_bayer |
uint | 0644 | UINT_MAX | T23 Bayer index override; 0xffffffff uses the media-bus code |
source_core_tuning_path |
charp | 0644 | 0 | IQ file override; unset selects /etc/sensor/-t23.bin |
source_defog_internal_enable |
bool | 0644 | 0 | |
source_gib_ir_value |
uint | 0644 | 0 | |
source_lsc_ct |
uint | 0644 | 5000 | |
source_lsc_initial_flip |
bool | 0644 | 0 | |
source_lsc_initial_mirror |
bool | 0644 | 0 | |
source_park_uninitialized_mdns |
bool | 0644 | 0 | |
source_sdns_internal_enable |
bool | 0644 | 1 | |
source_sdns_wdr |
bool | 0644 | 0 | |
source_sensor_fps |
uint | 0644 | 0 | |
source_sharpen_tuning_init |
bool | 0644 | 1 | |
source_total_gain_q16 |
uint | 0644 | 0 | |
t23_isr_enable |
callback | 0644 | see source (callback) | ISP core interrupt enable word (0xb0); default masks the unused sources 12, 13, 16, stock is 0xffffffff |
t23_runtime_trace |
int | 0644 | 0 | enable T23 informational driver logging (KERN_INFO and allow-listed progress notes), default 0 |
Bring-up build only: child_platforms, csi_rate_override, direct_csi_start, direct_enable_clks, direct_msca_cfg_load, direct_msca_qbuf, direct_msca_start, direct_sensor_stream, direct_tisp_stream_regs, direct_vic_start, enable_irqs_on_streamon, log_framechan_payloads, real_platforms, recovered_child_probes, sensor_i2c_adapter, source_adr_height, source_adr_initialized, source_adr_tuning_init, source_adr_width, source_ae_hlil_deadband, source_ae_hlil_drops, source_ae_hlil_ev, source_ae_hlil_fast_interval, source_ae_hlil_runs, source_ae_hlil_sat_permille, source_ae_hlil_state, source_ae_hlil_status, source_ae_hlil_updates, source_ae_stats_irqs, source_ae_stats_snapshots, source_awb_bootstrap_bgain, source_awb_bootstrap_rgain, source_awb_hlil_bg, source_awb_hlil_ct, source_awb_hlil_drops, source_awb_hlil_min_pixels, source_awb_hlil_rg, source_awb_last_mf_bg, source_awb_last_mf_rg, source_awb_profile_bbias, source_awb_profile_rbias, source_awb_static_init, source_awb_stats_init, source_awb_stats_irqs, source_awb_stats_processed_tap, source_awb_stats_snapshots, source_awb_stats_wide_thresholds, source_bcsh_ct_events, source_bcsh_ct_region, source_bcsh_ev_events, source_bcsh_events, source_bcsh_neutral, source_bcsh_runtime, source_bcsh_tuning_init, source_ccm_event_count, source_ccm_events, source_ccm_runtime_ct, source_clm_event_count, source_clm_events, source_clm_region, source_clm_runtime_ct, source_clm_startup_ct, source_clm_tuning_init, source_core_bypass, source_core_bypass_from_tuning, source_core_mode, source_core_start, source_csccr_init, source_csi_stream, source_defog_geometry_init, source_defog_geometry_runs, source_defog_height, source_defog_initialized, source_defog_tuning_init, source_defog_width, source_dmsc_sharpness, source_dmsc_tuning_init, source_dpc_tuning_init, source_frame_done, source_gamma_tuning_init, source_gib_tuning_init, source_lsc_event_count, source_lsc_events, source_lsc_gain_events, source_lsc_runtime_ct, source_lsc_tuning_init, source_mdns_gain_old, source_mdns_internal_enable, source_mdns_mode, source_mdns_paddr, source_mdns_restore_count, source_mdns_set_count, source_mdns_size, source_mdns_top_control, source_mdns_top_override, source_mdns_tuning_init, source_mdns_used, source_mdns_uv, source_msca_curves, source_msca_init, source_sdns_gain_old, source_sdns_tuning_init, source_sensor_stream, source_stock_stream_regs, source_vic_stream, source_wb_mode, source_ydns_tuning_init, text_watch, vic_irq_unmask_all.
15 parameters in a default build, 0 more in a bring-up build.
| Parameter | Type | Perm | Default | Description |
|---|---|---|---|---|
isp_clk |
int | 0 (not in sysfs) | 90000000 | isp core clock |
isp_m1_bufs |
int | 0 (not in sysfs) | 2 | isp m1 inter buffers |
isp_m2_bufs |
int | 0 (not in sysfs) | 2 | isp inter buffers |
ispcrop |
int | 0 (not in sysfs) | 0 | The function of isp's crop |
ispcroptl |
int | 0 (not in sysfs) | 0 | The begin point of isp's crop |
ispcropwh |
int | 0 (not in sysfs) | 0 | The size of isp's crop |
isph |
int | 0 (not in sysfs) | 0 | The height of isp's output |
ispleft |
int | 0 (not in sysfs) | 0 | The left of isp's output |
ispscaler |
int | 0 (not in sysfs) | 0 | The function of isp's crop |
ispscalerwh |
int | 0 (not in sysfs) | 0 | The size of isp's scaler |
isptop |
int | 0 (not in sysfs) | 0 | The top of isp's output |
ispw |
int | 0 (not in sysfs) | 0 | The width of isp's output |
print_level |
int | 0 (not in sysfs) | 1 | isp print level |
simple_3a |
bool | 0 (not in sysfs) | 1 | use the calibration-driven recovery AE/AWB path |
simple_awb |
bool | 0644 | 1 | enable calibration-driven recovery AWB updates |
47 parameters in a default build, 0 more in a bring-up build.
| Parameter | Type | Perm | Default | Description |
|---|---|---|---|---|
ae_effect_frame_override |
uint | 0644 | 0 | Override sensor gain effect delay (0 = tuning, max 14 frames) |
ae_fifo_depth_override |
uint | 0644 | 0 | Override the tuning binary's measured-luma FIFO depth (0 = tuning, max 15) |
ae_freeze |
int | 0644 | 0 | Hold the current sensor exposure tuple (0 = auto, 1 = frozen) |
ae_freeze_gain |
int | 0644 | 0 | Hold only the current sensor and ISP gain tuple (0 = auto, 1 = frozen) |
ae_freeze_integration |
int | 0644 | 0 | Hold only the current sensor integration time (0 = auto, 1 = frozen) |
ae_full_frame_mean |
int | 0644 | 0 | Use the unweighted full-frame AE mean instead of the OEM zone map |
csi_dump_enable |
int | 0444 | 0 | Enable CSI periodic dump to /opt/csi.txt (0=off, 1=on) |
csi_dump_interval_ms |
int | 0444 | 1000 | CSI dump interval in milliseconds |
fcrop_upscale_pct |
uint | 0644 | 100 | front crop: allowed MSCA upscale in percent (default 100 = 2.0x like the vendor, 0 = none, capped at 100) |
force_bypass_adr |
int | 0644 | 0 | Force ADR bypass (default: 0 — keep OEM ADR path live unless explicitly isolating it) |
force_bypass_defog |
int | 0644 | 0 | Force Defog bypass (default: 0 — match the OEM T31 pipeline) |
force_bypass_dpc |
int | 0644 | 0 | Force DPC (bit 2) bypass for AWB bisection |
force_bypass_gib |
int | 0644 | 0 | Force GIB (bit 5) bypass (default: 0 — match the OEM T31 pipeline) |
force_bypass_lsc |
int | 0644 | 0 | Force LSC bypass (bits 4 and 6) (default: 0 — use the sensor tuning mesh) |
force_bypass_mdns |
int | 0644 | 0 | Force MDNS bypass (default: 0 — MDNS provides temporal denoise) |
force_ccm_b |
int | 0644 | 0x400 | Forced CCM blue diagonal gain (0x400 = unity) |
force_ccm_bg |
int | 0644 | 0 | Forced CCM blue-from-green coefficient (signed, 0x400 = unity) |
force_ccm_br |
int | 0644 | 0 | Forced CCM blue-from-red coefficient (signed, 0x400 = unity) |
force_ccm_g |
int | 0644 | 0x400 | Forced CCM green diagonal gain (0x400 = unity) |
force_ccm_gb |
int | 0644 | 0 | Forced CCM green-from-blue coefficient (signed, 0x400 = unity) |
force_ccm_gr |
int | 0644 | 0 | Forced CCM green-from-red coefficient (signed, 0x400 = unity) |
force_ccm_r |
int | 0644 | 0x400 | Forced CCM red diagonal gain (0x400 = unity) |
force_ccm_rb |
int | 0644 | 0 | Forced CCM red-from-blue coefficient (signed, 0x400 = unity) |
force_ccm_rg |
int | 0644 | 0 | Forced CCM red-from-green coefficient (signed, 0x400 = unity) |
force_identity_ccm |
int | 0644 | 0 | Force CCM output to the diagnostic matrix (defaults to identity; default: 0 keeps the OEM CCM path) |
force_raw_correction_gain |
int | 0644 | -1 | Override GIB/DPC gain for raw-correction diagnosis (-1: disabled) |
isp_ae_log |
int | 0644 | 0 | Log per-frame AE diagnostics (0 = off, >= 2: AE_TRACE every N frames) |
isp_bypass_all |
int | 0644 | 0 | |
isp_bypass_graph |
int | 0444 | 0 | Enable the vendor ISP bypass graph (link config 1: raw frames from the VIC on channel 0) (default: 0) |
isp_bypass_override |
uint | 0644 | 0 | |
isp_ch0_pre_dequeue_interrupt_process |
int | 0444 | 0 | isp pre dequeue interrupt process |
isp_ch0_pre_dequeue_time |
int | 0444 | 0 | isp pre dequeue time, unit ms |
isp_ch0_pre_dequeue_valid_lines |
int | 0444 | 0 | isp pre dequeue valid lines |
isp_ch1_dequeue_delay_time |
int | 0444 | 0 | isp pre dequeue time, unit ms |
isp_clk |
int | 0444 | 200000000 | isp clock freq |
isp_day_night_switch_drop_frame_num |
int | 0444 | 0 | isp day night switch drop frame number |
isp_memopt |
int | 0444 | 1 | isp memory optimize, default 1 (0 = off) |
msca_flip_state |
callback | 0444 | see source (callback) | read-only: flip done by sensor/ISP, bits 0 sensor_h, 1 sensor_v, 2 isp_h, 3 isp_v |
print_level |
int | 0444 | 0x1 | isp print level |
qbuf_guard |
bool | 0644 | 1 | Reject framechan QBUF buffers outside rmem (default 1) |
sensor_expo_catchups |
uint | 0444 | 0 | Exposure requests caught while an earlier sensor write was running |
t31_awb_impl |
callback | 0644 | see source (callback) | AWB CT detection: 0=reference C, 1=fast C, 2=MXU2 (default; after selftest, fast C otherwise), all bit-exact |
t31_awb_selftest |
callback | 0644 | see source (callback) | write 1: compare reference/fast/MXU2 AWB CT detection on random scenes and time them (dmesg) |
t31_awb_selftest_state |
int | 0444 | see source | 0 not run, 1 passed, -1 failed |
t31_isr_enable |
callback | 0644 | see source (callback) | ISP core interrupt enable word (0xb0); default masks the unused source 16, stock is 0xffffffff |
t31_mxu2_cpm |
uint | 0444 | 0 | CPM 0x10000034 read by the selftest, information only; it is a clock/part register |
t31_runtime_trace |
int | 0644 | 0 | enable T31 runtime informational logging |
35 parameters in a default build, 0 more in a bring-up build.
| Parameter | Type | Perm | Default | Description |
|---|---|---|---|---|
atlas_open |
int | 0444 | see source | atlas open (accepted, unused) |
bin_version |
charp | 0444 | "1.00" | IQ bin format version the driver accepts |
bringup_ae |
uint | 0644 | 0 | 1: bring-up exposure controller (not the vendor AE), default 0 |
bringup_target |
uint | 0644 | 64 | bring-up controller target mean AE histogram bin (0..255) |
clk_name |
charp | 0444 | see source | chose parent clk |
clka_name |
charp | 0444 | see source | chose axi parent clk |
clkl_name |
charp | 0444 | see source | chose ldc parent clk |
clks_name |
charp | 0444 | see source | chose scaler parent clk |
clkv_name |
charp | 0444 | see source | chose vpu parent clk |
direct_mode |
uint | 0444 | see source | isp direct mode (1: channel 0 over the IVDC to the encoder) |
driver_soc |
charp | 0444 | T32_SOC_NAME | SoC name answered to DRIVER_VERSION |
driver_version |
charp | 0444 | "20251107a" | ISP driver version answered to DRIVER_VERSION (must match libimp) |
isp_cache_line |
int | 0444 | see source | isp cache line (accepted, unused) |
isp_ch0_pre_dequeue_time |
int | 0444 | see source | isp pre dequeue time, unit ms (accepted, unused) |
isp_clk |
int | 0444 | see source | isp clock freq |
isp_clka |
int | 0444 | see source | axi clock freq |
isp_clkl |
int | 0444 | see source | ldc clock freq |
isp_clks |
int | 0444 | see source | scaler clock freq |
isp_clkv |
int | 0444 | see source | vpu clock freq |
isp_irq |
int | 0444 | 8 + T32_IRQ_ISP_M0 | Linux IRQ of the ISP core (INTC 29) |
isp_memopt |
uint | 0444 | 1500 | MDNS memory ratio in 1/1000 (<=1000 uncompressed, max 2000) |
ivdc_irq |
int | 0444 | 8 + T32_IRQ_IVDC | Linux IRQ of the IVDC (INTC 57) |
ivdc_mem_line |
uint | 0444 | see source | ivdc mem line |
ivdc_mem_stride |
uint | 0444 | see source | ivdc mem stride |
ivdc_threshold_line |
uint | 0444 | see source | ivdc threshold line |
ldc_irq |
int | 0444 | 8 + T32_IRQ_ISP_M1 | Linux IRQ of the LDC (isp-m1, INTC 38) |
listen_timeout_ms |
uint | 0644 | 2000 | LISTEN_BUF wait limit |
lsc_ct |
uint | 0644 | 5000 | colour temperature for the LSC mesh at stream-on (vendor init: 5000) |
print_level |
int | 0644 | 1 | isp_printf threshold: 0 info, 1 warning, 2 error |
t32_isposd_trace |
uint | 0644 | 0 | 1: log every ISP OSD request and every MSCA OSD commit |
t32_ported_paths |
uint | 0644 | 1 | 1 (default): every wired per-frame block on its ported path; 0: all on the old path; else bit mask, bit 1+n = block n (0 dmsc, 1 ysp, 2 cdns, 3 ydns, 4 sdns, 5 mdns, 6 dpc, 7 gi... |
t32_trace |
int | 0644 | 1 | log every ioctl (S1 bring-up) |
tisp_tgain |
uint | 0644 | 0x10000 | total gain handed to the per-frame refresh until the vendor AE runs (default 0x10000) |
vic_irq |
int | 0444 | 8 + T32_IRQ_VIC | Linux IRQ of the VIC (INTC 30) |
zeratul_open |
int | 0444 | see source | zeratul open (accepted, unused) |
1 parameters in a default build, 0 more in a bring-up build.
| Parameter | Type | Perm | Default | Description |
|---|---|---|---|---|
aec_trace |
uint | 0644 | 0 | T33 AE: log the first N AE frames (debug), default 0 |
269 parameters in a default build, 377 more in a bring-up build.
| Parameter | Type | Perm | Default | Description |
|---|---|---|---|---|
adr_main_init_stage_limit |
uint | 0644 | 0 | |
ae_isp_dgain_max |
uint | 0644 | 4096 | |
ae_max_again_from_sensor |
bool | 0644 | 1 | |
ae_sensor_apply_clear_dirty |
bool | 0644 | 1 | |
ae_sensor_apply_force_packed |
uint | 0644 | 0 | |
ae_sensor_apply_log_skips |
bool | 0644 | 0 | |
ae_sensor_apply_max_again_index |
uint | 0644 | 400 | |
ae_soft_max_it_from_sensor |
bool | 0644 | 1 | |
ae_soft_min_it_from_sensor |
bool | 0644 | 1 | |
ae_soft_target |
uint | 0644 | 140 | |
ae_soft_updates |
uint | 0444 | 0 | |
ae_target_comp |
uint | 0444 | 128 | |
ae_user_max_again_x1024 |
uint | 0444 | 0 | |
ae_user_max_isp_dgain_x1024 |
uint | 0444 | 0 | |
ae_user_max_it |
uint | 0444 | 0 | |
awb_grayworld_bbias |
uint | 0644 | 1448 | |
awb_grayworld_last_bgain |
uint | 0444 | 0x666 | |
awb_grayworld_last_rgain |
uint | 0444 | 0x5a0 | |
awb_grayworld_rbias |
uint | 0644 | 1193 | |
awb_main_init_stage_limit |
uint | 0644 | 0 | |
awb_manual_bgain |
uint | 0644 | 0 | |
awb_manual_rgain |
uint | 0644 | 0 | |
bcsh_brightness |
uint | 0444 | 128 | |
bcsh_contrast |
uint | 0444 | 128 | |
bcsh_ct |
uint | 0644 | 6000 | |
bcsh_ev |
uint | 0644 | 400 | |
bcsh_hue |
uint | 0444 | 128 | |
bcsh_mode |
uint | 0644 | 2 | |
bcsh_saturation |
uint | 0644 | 128 | |
bcsh_user_full |
bool | 0644 | 1 | |
blc_lit_gain |
uint | 0644 | 212541 | |
blc_lit_gain_now |
uint | 0444 | 0 | |
ccm_ct |
uint | 0644 | 5000 | |
ccm_ct_now |
uint | 0444 | 0 | |
ccm_ct_track |
bool | 0644 | 1 | |
ccm_ev |
uint | 0644 | 400 | |
ccm_ev_now |
uint | 0444 | 0 | |
clk_name |
charp | 0 (not in sysfs) | 0 | chose parent clk |
cnt_core_ops_init |
uint | 0444 | see source | |
cnt_main_long_tgain_update |
uint | 0444 | see source | |
cnt_sec_init |
uint | 0444 | see source | |
core_bayer_reg8_value |
uint | 0644 | 0x10002 | |
core_isr_frame_deliver_count |
uint | 0444 | 0 | |
csi_direct_stage_limit |
uint | 0644 | 0 | |
csi_settle_override |
uint | 0644 | 0 | |
dmsc_lit_gain |
uint | 0644 | 212541 | |
dmsc_lit_gain_now |
uint | 0444 | 0 | |
dmsc_stock_current_overlay |
bool | 0644 | 1 | |
dmsc_stock_high_gain_overlay |
bool | 0644 | 0 | |
dmsc_stock_overlay_mask |
uint | 0644 | 0xf | |
dns_gain_ev |
uint | 0644 | 0 | |
enable_adr_process_work |
bool | 0644 | 0 | |
enable_adr_reg_writes |
bool | 0644 | 1 | |
enable_ae_sensor_apply |
bool | 0644 | 0 | |
enable_ae_soft |
bool | 0644 | 0 | |
enable_awb_grayworld |
bool | 0644 | 0 | |
enable_awb_reg_writes |
bool | 0644 | 1 | |
enable_awb_set_gain |
bool | 0644 | 1 | |
enable_bcsh |
bool | 0644 | 0 | |
enable_bcsh_static |
bool | 0644 | see source | |
enable_blc_lit |
bool | 0644 | 0 | |
enable_ccm |
bool | 0644 | 0 | |
enable_cdns |
bool | 0644 | 0 | CDNS chroma denoise (TOP bit 19): follows the bank flag like the OEM (set at bank apply); force on with t40_force_active bit 19 (0x80000), off with t40_force_bypass bit 19 |
enable_core_bayer_reg8 |
bool | 0644 | 0 | |
enable_core_ops_cb |
bool | 0644 | 1 | |
enable_core_top_sel_reg0c |
bool | 0644 | 0 | |
enable_dmsc_lit |
bool | 0644 | 0 | |
enable_dmsc_static |
bool | 0644 | 1 | |
enable_frame_3a |
bool | 0644 | 0 | |
enable_gib_blc |
bool | 0644 | 0 | |
enable_gib_lit |
bool | 0644 | 0 | |
enable_isp_3a_diag |
bool | 0644 | 0 | |
enable_isp_block_init |
bool | 0644 | 0 | |
enable_isp_block_init_ae |
bool | 0644 | 0 | |
enable_isp_block_init_awb |
bool | 0644 | 0 | |
enable_isp_stats_fanout |
bool | 0644 | 0 | |
enable_lsc_lit |
bool | 0644 | 0 | |
enable_mdns |
bool | 0644 | 1 | |
enable_msca_rearm_guard |
bool | 0644 | 0 | |
enable_msca_spare |
bool | 0644 | see source | |
enable_sdns |
bool | 0644 | 0 | |
enable_soft_gamma |
bool | 0644 | 0 | |
enable_t40_color_reg_snapshot |
bool | 0644 | 0 | |
enable_t40_msca_shadow_fifo_program |
bool | 0644 | 0 | |
enable_tisp_event_threads |
bool | 0644 | 0 | |
enable_tisp_main_init_csc_version |
bool | 0644 | 0 | |
enable_tisp_main_init_dma_kseg0 |
bool | 0644 | 0 | |
enable_tisp_main_init_event_init |
bool | 0644 | 0 | |
enable_tisp_main_init_scalar_regs |
bool | 0644 | 0 | |
enable_tisp_main_init_tispinfo_dma |
bool | 0644 | 0 | |
enable_tisp_main_init_tiziano |
bool | 0644 | 0 | |
enable_tisp_stream_event_cbs |
bool | 0644 | 0 | |
enable_tisp_stream_event_init |
bool | 0644 | 0 | |
enable_tisp_stream_regs_after_video |
bool | 0644 | 0 | |
enable_tisp_top_regs_final_reapply |
bool | 0644 | 0 | |
enable_tiziano_param_load |
bool | 0644 | 1 | |
enable_vic_mdma_qbuf_ring |
bool | 0644 | 0 | |
enable_ydns |
bool | 0644 | 0 | |
enable_ysp |
bool | 0644 | 0 | |
force_core_bayer_reg8_value |
bool | 0644 | 0 | |
force_local_frame_streamoff |
bool | 0644 | 0 | |
force_tisp_main_init_yuv_input_csc_version |
bool | 0644 | 0 | |
frame_3a_ch1_idle_ms |
uint | 0644 | 300 | |
frame_3a_ch1_samples |
uint | 0444 | 0 | |
frame_3a_completed_seq |
uint | 0444 | 0 | |
frame_3a_completed_uv_phys |
uint | 0444 | 0 | |
frame_3a_completed_y_phys |
uint | 0444 | 0 | |
frame_3a_interval |
uint | 0644 | 3 | |
frame_3a_samples |
uint | 0444 | 0 | |
frame_3a_slide_window |
bool | 0644 | 1 | |
frame_3a_work_runs |
uint | 0444 | see source | |
frame_awb_bggr_fast |
bool | 0644 | 1 | |
framechan_neutral_uv_channel_mask |
uint | 0644 | 0x1U | |
framechan_neutral_uv_on_done |
bool | 0644 | 0 | |
framechan_neutral_uv_value |
uint | 0644 | 0x80U | |
gib_blc_offset |
uint | 0644 | 0x100 | |
gib_lit_final_gain |
uint | 0644 | 1261 | |
gib_lit_gain |
uint | 0644 | 212541 | |
gib_lit_gain_now |
uint | 0444 | 0 | |
irq_frame_done_delay_ms |
uint | 0644 | 0 | |
irq_frame_done_require_content |
bool | 0644 | 0 | |
isp_block_init_adr_ret |
int | 0444 | 0 | |
isp_block_init_awb_ret |
int | 0444 | 0 | |
isp_block_init_count |
uint | 0444 | 0 | |
isp_block_init_ran |
bool | 0444 | 0 | |
isp_block_init_skip_no_blob |
uint | 0444 | 0 | |
isp_block_init_stage_limit |
uint | 0644 | 0 | |
isp_ch0_pre_dequeue_time |
int | 0 (not in sysfs) | 0 | isp pre dequeue time, unit ms |
isp_clk |
int | 0 (not in sysfs) | 200000000 | isp clock freq |
isp_dual_buf |
int | 0 (not in sysfs) | 65538 | isp dual buff |
isp_irq_frame_done_status0_mask |
uint | 0644 | 0x1U | |
isp_memopt |
int | 0 (not in sysfs) | 0 | isp memory optimize |
isp_stats_fanout_adr_status0_mask |
uint | 0644 | 0 | |
isr_oem_hw_refresh |
int | 0644 | 0 | core IRQ frame-done: call tisp_hardware_reg_refresh() (OEM 0x7b138). default 0 |
lsc_lit_ct |
uint | 0644 | 5000 | |
lsc_lit_ct_cool_ct |
uint | 0644 | 6500 | |
lsc_lit_ct_cool_x |
uint | 0644 | 730 | |
lsc_lit_ct_now |
uint | 0444 | see source | |
lsc_lit_ct_track |
bool | 0644 | 1 | |
lsc_lit_ct_warm_ct |
uint | 0644 | 3300 | |
lsc_lit_ct_warm_x |
uint | 0644 | 1074 | |
lsc_lit_gain |
uint | 0644 | see source | |
mdns_buf_phys |
uint | 0644 | 0 | |
mdns_dbg_init_ret |
uint | 0444 | 0xdeadbeefU | |
mdns_dbg_reg68 |
uint | 0444 | 0 | |
msca_rearm_guard_max_skips |
uint | 0644 | 3 | |
msca_spare_phys |
uint | 0644 | 0x0c800000U | |
oem_event_pre_csi_delay_ms |
uint | 0644 | 0 | |
oem_event_pre_csi_stage_limit |
uint | 0644 | 0 | |
oem_event_pre_csi_stream |
bool | 0644 | 0 | |
panic_dump_phys |
uint | 0644 | 0xe9f0000U | |
print_level |
int | 0 (not in sysfs) | 1 | isp print level |
proc_live_reads |
bool | 0644 | 0 | |
running_mode |
uint | 0444 | 0 | |
sensor_full_height_override |
uint | 0644 | 0 | |
sensor_full_width_override |
uint | 0644 | 0 | |
skip_tisp_deinit |
bool | 0644 | 1 | |
t40_adr_ev_shift |
int | 0644 | 0 | |
t40_adr_lowmem |
bool | 0644 | 0 | |
t40_adr_on |
bool | 0644 | 1 | 1 (with t40_gates_oem_offset=1) runs the ADR chain and clears TOP bit 7 after a successful init (default 1) |
t40_ae_af_enable |
bool | 0644 | 1 | |
t40_ae_af_night_bin |
bool | 0644 | 1 | |
t40_ae_af_step_now |
uint | 0444 | see source | |
t40_ae_api |
callback | 0444 | see source (callback) | |
t40_ae_dg_delay |
int | 0644 | -1 | |
t40_ae_ev_push_fail |
uint | 0444 | see source | |
t40_ae_ev_pushes |
uint | 0444 | see source | |
t40_ae_ev_runs |
uint | 0444 | see source | |
t40_ae_every_frame |
uint | 0644 | 1 | |
t40_ae_fine_trim |
uint | 0644 | 1 | |
t40_ae_fine_trims |
uint | 0444 | 0 | |
t40_ae_ftrace |
callback | 0644 | see source (callback) | |
t40_ae_ftrace_dump |
callback | 0444 | see source (callback) | |
t40_ae_hi_thr |
uint | 0644 | 0 | |
t40_ae_irq_event |
uint | 0644 | 1 | |
t40_ae_isp_dgain_max_bin |
bool | 0644 | 1 | |
t40_ae_isp_dgain_max_now |
uint | 0444 | see source | |
t40_ae_max_again_index_eff |
uint | 0444 | 0 | |
t40_ae_oem_allocs |
uint | 0444 | 0 | |
t40_ae_oem_step |
uint | 0644 | 1 | |
t40_ae_oem_steps |
uint | 0444 | see source | |
t40_ae_only_runs |
uint | 0444 | see source | |
t40_ae_report_lag |
int | 0644 | -1 | |
t40_ae_sensor_fd |
uint | 0644 | 1 | |
t40_ae_split_legacy |
uint | 0644 | 0 | |
t40_ae_split_moves |
uint | 0444 | see source | |
t40_ae_stats_src |
uint | 0644 | 0 | |
t40_ae_target_oem |
uint | 0644 | 1 | |
t40_ae_trade_sensor_gain |
bool | 0644 | 1 | |
t40_allow_antiflick |
bool | 0644 | 1 | |
t40_antiflick_hz |
uint | 0644 | see source | |
t40_awb_ctd |
bool | 0644 | see source | |
t40_az_live_max_w |
uint | 0644 | 0 | |
t40_bringup_profile |
bool | 0644 | 1 | |
t40_c2_flip |
uint | 0644 | 0 | |
t40_c2_state |
callback | 0444 | see source (callback) | |
t40_c2_stray |
uint | 0644 | 0 | |
t40_clm |
bool | 0644 | 1 | 1 (default): CLM colour LUT (TOP bit 16) from the bank flag with the vendor CT follow-up like the OEM; 0: CLM bypassed |
t40_core_fixup_shadow0 |
bool | 0644 | 0 | |
t40_csc_unsafe |
uint | 0644 | see source | allow the lifted OEM CSC get/set (stack/bss overflow, debug only) |
t40_defog_air_day |
bool | 0644 | 1 | defog: 1 (default, OEM-equal) air light curve + output range from the day bank in both modes, 0 = from the active bank |
t40_defog_dn_cache_reset |
bool | 0644 | 1 | defog: 1 (default) drops the curve/transmission caches on a day/night refresh, 0 = OEM (old bank values stay cached) |
t40_defog_dump |
callback | 0444 | see source (callback) | |
t40_defog_motion_var |
bool | 0644 | 1 | defog: 1 (default) motion weighting uses the variance over the 5x5 window, 0 = OEM (last cell only) |
t40_defog_on |
bool | 0644 | 1 | 1 (with t40_gates_oem_offset=1) runs the defog chain and clears TOP bit 11 after a successful init (default 1) |
t40_defog_sum_air |
uint | 0444 | see source | |
t40_defog_sum_trans |
uint | 0444 | see source | |
t40_defog_trans_day |
bool | 0644 | 1 | defog: 1 (default, OEM-equal) transmission of luma >= 180 from the day bank, kept across EV/day-night changes; 0 = active bank for all luma |
t40_defog_trans_reset_all |
bool | 0644 | 1 | defog: 1 (default) drops all 256 transmission cache entries on an EV/strength change, 0 = OEM (only 180) |
t40_dmsc_day_follow |
bool | 0644 | 1 | 1 (default): with t40_dmsc_follow the literal DMSC chain also runs in day mode (OEM behaviour); 0: static day DMSC block |
t40_dmsc_day_restores |
uint | 0444 | 0 | |
t40_dmsc_follow |
bool | 0644 | 1 | 1 (default): DMSC follows the active day/night bank and the total gain like the OEM (literal chain); 0 = old profile-1 behaviour (static DMSC) |
t40_dn_keep_awb1 |
bool | 0644 | 0 | 0 (default, #332): AWB1 (TOP bit 6) follows the bank like the vendor (TOP written before the AWB refresh at the switch); 1: keep AWB1 at the day-bank state at night (pre-#332) |
t40_dn_top_first |
bool | 0644 | 1 | |
t40_dns_ev_boost |
uint | 0644 | 0 | |
t40_dpc_on |
bool | 0644 | 1 | 1 (with t40_gates_oem_offset=1) runs the DPC chain and clears TOP bit 4 after a successful init (default 1) |
t40_dqbuf_wait_ms |
uint | 0644 | 0 | frame channel DQBUF waits up to this many ms for a done frame (0 = return ENODATA at once) |
t40_ev_follow |
bool | 0644 | 1 | |
t40_ev_now |
uint | 0444 | 0 | |
t40_exit_stats_off |
bool | 0644 | 1 | exit: also clear the AE/AWB statistics enables (0x19000/0x18000) before freeing their buffers |
t40_force_active |
uint | 0644 | 0x6020U | |
t40_force_bypass |
uint | 0644 | 0x20000U | |
t40_gamma_ev |
bool | 0644 | 1 | T40: OEM gamma EV follow-up (bin strength nodes; 0 = fixed bin curve, the pre-#204 behaviour) |
t40_gamma_ev_str |
uint | 0444 | 255 | |
t40_gamma_ev_writes |
uint | 0444 | 0 | |
t40_gamma_from_bin |
bool | 0644 | 1 | |
t40_gates_day_blc |
bool | 0644 | 0 | |
t40_gates_day_gib_blc |
uint | 0644 | 0 | |
t40_gates_oem_offset |
bool | 0644 | 1 | 1 (default) reads the bin bypass flags at +0x00 for linear sensors like stock tisp_main_init; 0 = old profile behaviour (always +0x20, the WDR set) |
t40_generic_profile |
bool | 0644 | 0 | |
t40_isr_ch1_direct |
bool | 0644 | 1 | |
t40_lce_on |
bool | 0644 | 1 | 1 (with t40_gates_oem_offset=1) runs the LCE chain and clears TOP bit 21 after a successful init (default 1) |
t40_ls_bench |
callback | 0444 | see source (callback) | |
t40_msca_fifo_addr_tag_mode |
uint | 0644 | 0 | |
t40_msca_vendor_fixups |
bool | 0644 | 0 | |
t40_nv12_height_align |
uint | 0644 | 0 | |
t40_profile_direct_vic_feed |
bool | 0644 | 0 | |
t40_profile_force_vic_mdma_qbuf_ring |
bool | 0644 | 0 | |
t40_profile_isp_irq_passthrough |
bool | 0644 | 1 | |
t40_profile_no_direct_addr_source |
uint | 0644 | 0 | |
t40_profile_no_direct_irq_defaults |
bool | 0644 | 1 | |
t40_quality_profile |
uint | 0644 | 1 | |
t40_quality_top40_override |
uint | 0644 | 0 | |
t40_release_reset_count |
uint | 0444 | 0 | |
t40_rmmod_skip_slake |
bool | 0644 | 1 | |
t40_runtime_trace |
int | 0644 | 0 | 1 = log bring-up and progress notes (default 0: only warnings and errors) |
t40_sensor_stream_off_on_stop |
bool | 0644 | 1 | |
t40_stock_host_init_mask |
uint | 0644 | 0 | |
t40_tisp_par |
int | 0444 | 0 | 1 enables /dev/tisp parameter get/set (debug build only, needs CAP_SYS_RAWIO) |
t40_tisp_stream_vendor |
bool | 0644 | 0 | |
t40_tuning_bin_path |
charp | 0644 | 0 | |
t40_vawb_diag |
callback | 0444 | see source (callback) | |
t40_vawb_faults |
uint | 0444 | 0 | |
t40_vawb_frames |
uint | 0444 | see source | |
t40_vawb_loop_trips |
uint | 0444 | see source | |
t40_vawb_tbuf |
callback | 0444 | see source (callback) | |
t40_ysp_on |
bool | 0644 | 1 | 1 lets the bin gates enable YSP (sharpening) despite t40_force_bypass bit 17; active only after a successful init (default 1) |
tisp_main_init_csc_version_value |
uint | 0644 | 2 | |
tisp_main_init_reg88_override |
uint | 0644 | 0xffffffffU | |
tisp_main_init_top40_value |
uint | 0644 | 0x7fffeeff | |
unresolved_jalr_count |
uint | 0444 | 0 | |
vic_mdma_qbuf_ring_ctrl_value |
uint | 0644 | 0 | |
vic_mdma_qbuf_ring_stride_override |
uint | 0644 | 0 | |
vic_mdma_qbuf_ring_uv_offset_override |
uint | 0644 | 0 | |
ysp_gain_ev |
uint | 0644 | 0 | |
ysp_gain_ev_now |
uint | 0444 | 0 | |
ysp_init_ret |
int | 0444 | -1 | |
ysp_refresh_blocked |
uint | 0444 | 0 | |
ysp_refresh_count |
uint | 0444 | 0 |
Bring-up build only: activate_core_clk_mask, activate_core_direct, activate_core_probe_clk_mask, activate_core_probe_state, activate_core_state_only, adr_forced_blocked, adr_main_init_direct_count, adr_main_init_direct_ret, adr_main_init_direct_stage, ae_isp_dgain_cur, ae_isp_dgain_updates, ae_soft_cur_again, ae_soft_cur_it, ae_soft_hyst, ae_soft_last_mean, ae_soft_max_it, ae_soft_min_it, awb_control_frozen, awb_control_mode, awb_grayworld_interval, awb_grayworld_irqs, awb_grayworld_updates, cdns_dbg_init_ret, cdns_gain_now, cdns_init_count, cdns_refresh_count, cdns_skip_count, cdns_thresh, core_dqbuf_enodata_count, core_irq_cfg0_value, core_irq_cfg1_value, core_irq_errmask0_value, core_irq_errmask1_value, core_irq_fd_enodata_count, core_irq_mask0_value, core_irq_mask1_value, core_isr_frame_deliver_last_ret, core_isr_oem_frame_event, core_leg_a_iter_count, core_leg_b_iter_count, core_msca_fifo_write_count, core_ops_cb_call_count, core_ops_cb_core_off, core_ops_cb_core_path_count, core_ops_cb_core_skip, core_ops_cb_fire_gate, core_ops_cb_fire_require_pending, core_ops_cb_first_cb, core_ops_cb_first_dev, core_ops_cb_first_sec0, core_ops_cb_first_status0, core_ops_cb_first_status1, core_ops_cb_first_walk_index, core_ops_cb_first_who, core_ops_cb_gate_bypass_count, core_ops_cb_gate_skip_count, core_ops_cb_gate_skip_nocore_count, core_ops_cb_gate_skip_nopending_count, core_ops_cb_jiffy_calls, core_ops_cb_jiffy_calls_max, core_ops_cb_last_cb, core_ops_cb_last_dev, core_ops_cb_last_irq, core_ops_cb_last_is_core, core_ops_cb_last_pending, core_ops_cb_last_ret, core_ops_cb_last_sec_status0, core_ops_cb_last_status0, core_ops_cb_last_status1, core_ops_cb_max_per_jiffy, core_ops_cb_slot_mask, core_ops_cb_slot_skip, core_ops_cb_storm_count, core_ops_cb_storm_reset, core_ops_cb_storm_tripped, core_ops_cb_walk_index, core_ops_cb_walk_mask, core_ops_cb_walk_path_count, core_ops_cb_walk_skip, core_start_mode_804_value, day_awb_bgain, day_awb_rgain, delegate_framechan_ioctl, delegate_tx_isp_ioctl, disable_dmsc_lit, dmsc_sharpness, dns_ev_applied, enable_core_event_gate_1700c, enable_core_event_oem_state_sequence, enable_core_event_state_2_before_boot, enable_core_event_state_3, enable_core_event_state_4, enable_core_event_tisp_main_init, enable_core_irq_after_video, enable_core_irq_oem_enable_path, enable_core_irq_on_stream, enable_core_start_800, enable_core_system_reg_write, enable_framechan_wait_irq_done, enable_framechan_wait_msca_poll, enable_irq_frame_done_event, enable_isp_irq_ack_only, enable_isp_irq_post_dispatch_ack, enable_msca_cfg_load_pulse, enable_proc_jz_sensor_read, enable_t40_msca_cfg_after_video, enable_t40_msca_cfg_on_set_fmt, enable_t40_msca_cfg_program, enable_t40_msca_oem_cfg_load, enable_t40_msca_scaler_level_control, enable_t40_msca_shadow_commit, enable_t40_msca_shadow_kick_834, enable_tisp_desc_oem_fill, enable_tisp_ipc_oem_gate, enable_tisp_ipc_trigger, enable_tisp_ipc_trigger_1000, enable_tisp_ipc_trigger_1004, enable_tisp_main_init_dma_regs, enable_tisp_main_init_msca_oem_order, enable_tisp_main_init_param_alloc, enable_tisp_main_init_scalar_regs_after_video, enable_tisp_main_init_sensor_init, enable_tisp_main_init_size_reg, enable_tisp_main_init_state, enable_tisp_main_init_tail_regs, enable_tisp_main_init_yuv_input_csc_version, enable_tisp_process_init, enable_tisp_stream_event_cbs_before_1008, enable_tisp_stream_on, enable_tisp_stream_preamble_regs, enable_tisp_stream_reg_1008_286, enable_tisp_stream_reg_1008_value, enable_tisp_stream_reg_1010_zero, enable_tisp_stream_reg_1014_zero, enable_tisp_stream_regs, enable_tisp_stream_setup_regs, enable_tisp_stream_start_1060, enable_vic_irq_ack_filter, enable_vic_mdma_internal_ring, enable_vic_mdma_kick_370, enable_vic_mdma_no_ring, enable_vic_mdma_qbuf_rearm_irq, flight_recorder, fr2_capture, fr2_ev_seq, fr2_open_seq, fr2_reg_seq, frame_3a_highlight_level, frame_3a_highlight_limit_permille, frame_3a_last_highlight_permille, frame_3a_last_luma, frame_3a_last_u, frame_3a_last_v, frame_3a_target, frame_3a_window_misses, frame_3a_work_busy, frame_awb_hyst, frame_awb_target, framechan_dma_sync_dqbuf, framechan_dma_sync_dqbuf_dir, framechan_dma_sync_qbuf, framechan_dma_sync_qbuf_dir, framechan_repair_dqbuf, framechan_wait_irq_timeout_ms, framechan_wait_msca_timeout_ms, gib_lit_bayer_now, gib_lit_dgain01_now, gib_lit_dgain23_now, gib_lit_dgain_shift_now, gib_lit_map_now, irq_frame_done_active_fallback, irq_frame_done_addr_source, irq_frame_done_channel_mask, irq_frame_done_count_only, irq_frame_done_defer, irq_frame_done_defer_fifo_read, irq_frame_done_delivery_mode, irq_frame_done_dry_run, irq_frame_done_event_limit, irq_frame_done_local_match_buf, irq_frame_done_local_touch_buf, irq_frame_done_min_change_words, irq_frame_done_min_nonzero_words, irq_frame_done_require_active, irq_frame_done_require_fifo, irq_frame_done_source_mask, irq_func_cb_bank2_dispatch_count, irq_func_cb_bank2_null_count, irq_func_cb_bank2_tested_count, irq_func_cb_dispatch_count, irq_func_cb_frame_calls, irq_func_cb_frame_count, irq_func_cb_last_actual_index, irq_func_cb_last_bank, irq_func_cb_last_frame_calls, irq_func_cb_last_frame_primary_mask, irq_func_cb_last_frame_secondary_mask, irq_func_cb_last_frame_slots0, irq_func_cb_last_frame_slots1, irq_func_cb_last_frame_slots2, irq_func_cb_last_slot, irq_func_cb_last_slot_valid, irq_func_cb_log_count, irq_func_cb_null_count, irq_func_cb_oob_count, irq_func_cb_stride_mismatch_count, irq_func_cb_tested_count, isp_block_init_ae_ret, isp_irq_ack_only_disable_after, isp_irq_frame_done_sec_status0_mask, isp_irq_frame_done_status1_mask, isr_drain_diag, isr_oem_hw_refresh_count, isr_oem_hw_refresh_out, isr_oem_hw_refresh_ret, isr_oem_state744, isr_oem_state764, isr_oem_state_load, isr_oem_state_load_bad, isr_oem_state_load_count, isr_spin_bail_count, isr_spin_budget, isr_tail_poll, isr_tail_poll_count, isr_wlut_trace, lsc_lit_ct_max, lsc_lit_ct_min, mdns_buf_size, msca_cfg_direct_count, msca_cfg_direct_last_ret, msca_kick834_count, msca_kick834_last_value, msca_peek, msca_peek_groups, panic_dump_enable, panic_dump_logbuf_len, panic_dump_logbuf_ptr, rmem_base_now, rmem_size_now, sensor_fps_packed, sensor_i2c_adapter_fallback, skip_core_mmio_writes, skip_csi_stream, skip_legacy_msca_attr, skip_sensor_core_init, skip_sensor_video_stream, skip_tisp_channel_start, skip_vic_irq_enable, skip_vic_mdma_writes, skip_vic_mipi_start, skip_vic_stream, t40_ae_diag, t40_ae_force_auto, t40_ae_limits, t40_ae_par_calc, t40_ae_par_calc_count, t40_ae_sensor_alloc_again, t40_awb_proc_stages, t40_awb_spec_regs, t40_awb_stats_ped, t40_awb_stats_ped_now, t40_awb_step, t40_awb_tgain_last, t40_az_deferred, t40_az_failed, t40_az_live, t40_az_live_max_h, t40_az_stored, t40_bayer_oem_mapper_check, t40_core_fixup_40, t40_core_fixup_88, t40_ct_lsc_writes, t40_ct_update, t40_dn_event_last_ret, t40_dn_event_runs, t40_ev_cur, t40_ev_cur_n, t40_exit_vic_reset, t40_fr_big, t40_fr_regs, t40_gates_awb, t40_gates_keep_blc, t40_gates_offset_now, t40_gates_reg6c, t40_gates_reg6c_value, t40_gates_reg6c_writes, t40_gib_again_calls, t40_gib_blc_delta, t40_gib_dgain_calls, t40_gib_dgain_last, t40_gib_dgain_last_in, t40_gib_dgain_ok, t40_gib_force_init, t40_gib_init_calls, t40_gib_init_ret, t40_gib_oem_active, t40_gib_real, t40_gib_status_word, t40_isr_ch1_irq, t40_isr_ch1_pop, t40_loopguard, t40_msca_cfg_1602c_value, t40_msca_cfg_direct, t40_msca_ch1_kick, t40_msca_clear_load_after_program, t40_msca_coeff_override, t40_msca_fifo_addr_tag_write, t40_msca_fifo_ch0_uv_ctrl, t40_msca_fifo_ch0_y_ctrl, t40_msca_fifo_ch1_uv_ctrl, t40_msca_fifo_ch1_y_ctrl, t40_msca_fifo_ch2_uv_ctrl, t40_msca_fifo_ch2_y_ctrl, t40_msca_fifo_ctrl_after_qbuf, t40_msca_fifo_ctrl_on_qbuf, t40_msca_fifo_ctrl_on_set_fmt, t40_msca_late_work_en, t40_msca_oem_1602c, t40_msca_oem_coeffs, t40_msca_oem_stop, t40_msca_oem_stop_count, t40_msca_rewrite_coeffs_late, t40_msca_rewrite_full_size_late, t40_msca_scale_active_only, t40_msca_scaler_level, t40_msca_shadow_cmd_mask, t40_msca_shadow_kick_reg, t40_msca_shadow_kick_value, t40_msca_shadow_write_load_mask, t40_msca_vendor_fixups_2c, t40_msca_work_cfg_override, t40_msca_work_en_dma_bits, t40_msca_work_en_dma_mask, t40_msca_work_handshake, t40_quality_raw_init, t40_release_reset, t40_release_reset_last_ack, t40_tuning_bcsh_bypass_now, t40_tuning_blc_bypass_now, t40_tuning_gib_bypass_now, t40_tuning_lsc_bypass_now, t40_tuning_top_flags_now, t40_vawb_ct, t40_vawb_debug, t40_vawb_dump_req, t40_vawb_ev, t40_vawb_loop_pc, t40_vawb_run, t40_vawb_trace, t40_vendor_expo_count, t40_vendor_expo_last_ret, t40_vendor_it_default, t40_vic_frame_output, t40_vic_frame_output_msca_ctrl, t40_vic_frame_output_msca_ctrl2, t40_vic_frame_output_msca_e0_clear, t40_vic_frame_output_msca_word74, t40_vic_frame_output_msca_word8c, t40_vic_frame_output_msca_words, t40_vic_frame_output_msca_work28, t40_worker_stat, tisp_ipc_1000_delay_ms, tisp_main_init_reg20_value, tisp_main_init_reg48_value, tisp_main_init_reg60_value, tisp_main_init_reg6c_value, tisp_stream_reg_1008_offset, tisp_stream_reg_1008_value, trace_core_top_writes, vendor_per_frame, vic_mdma_internal_channel_mask, vic_mdma_internal_count, vic_mdma_internal_fmt, vic_mdma_internal_layout, vic_mdma_internal_phys_base, vic_mdma_internal_size, ysp_ev_applied.
173 parameters in a default build, 81 more in a bring-up build.
| Parameter | Type | Perm | Default | Description |
|---|---|---|---|---|
af_bad_index |
uint | 0444 | 0 | |
af_irqs |
uint | 0444 | 0 | |
af_live |
int | 0444 | 0 | |
af_runs |
uint | 0444 | 0 | |
awb_diag_bgain |
uint | 0444 | 0 | |
awb_diag_change |
uint | 0444 | 0 | |
awb_diag_ct_cal |
uint | 0444 | 0 | |
awb_diag_frz |
uint | 0444 | 0 | |
awb_diag_frz_th |
uint | 0444 | 0 | |
awb_diag_mode |
uint | 0444 | 0 | |
awb_diag_rgain |
uint | 0444 | 0 | |
awb_dump_req |
uint | 0644 | 0 | |
clk_name |
charp | 0 (not in sysfs) | "vpll" | select the isp parent clock |
clka_name |
charp | 0 (not in sysfs) | "sclka" | select the axi bus parent clock |
clks_name |
charp | 0 (not in sysfs) | "sclka" | select the scaler parent clock |
csc_latch_skipped |
uint | 0444 | 0 | |
csc_latches |
uint | 0444 | 0 | |
defog_evs |
uint | 0444 | see source | |
defog_frames |
uint | 0444 | see source | |
defog_irqs |
uint | 0444 | see source | |
defog_live |
uint | 0444 | 0 | |
direct_mode |
int | 0 (not in sysfs) | 0 | isp direct mode |
draw_commits |
uint | 0444 | 0 | |
heap_decoy_hits |
uint | 0444 | 0 | |
heap_watch_hits |
uint | 0444 | 0 | |
irq_func_cb_rejects |
uint | 0444 | 0 | |
isp_bypass_graph |
int | 0444 | 0 | Enable the VIC MDMA raw-capture bypass graph (default: 0) |
isp_ch0_pre_dequeue_time |
int | 0 (not in sysfs) | 0 | isp pre dequeue time, unit ms |
isp_clk |
int | 0 (not in sysfs) | 300000000 | isp clock freq |
isp_clka |
int | 0 (not in sysfs) | 550000000 | isp axi bus clock freq (default 550 MHz, clamped to <= 550 MHz) |
isp_clks |
int | 0 (not in sysfs) | 550000000 | isp scaler clock freq |
isp_memopt |
int | 0 (not in sysfs) | 1 | isp memory optimize |
ivdc_mem_line |
int | 0 (not in sysfs) | 0 | ivdc mem line |
ivdc_threshold_line |
int | 0 (not in sysfs) | 0 | ivdc threshold line |
mdns_ref_hold |
uint | 0644 | 0 | bit 0: the MDNS writer keeps the reference fields at 0xff (OpenIMP test pattern mode 5; default 0) |
msca_ctl_deferred |
uint | 0444 | 0 | |
msca_ctl_failed |
uint | 0444 | 0 | |
msca_ctl_live |
uint | 0444 | 0 | |
msca_fmt_refused |
uint | 0444 | 0 | |
msca_frame_enables |
uint | 0444 | 0 | |
msca_latch_timeouts |
uint | 0444 | 0 | |
msca_latch_wait_max_us |
uint | 0444 | 0 | |
msca_live_disables |
uint | 0444 | 0 | |
msca_start_latches |
uint | 0444 | 0 | |
osd_commits |
uint | 0444 | 0 | |
print_level |
int | 0 (not in sysfs) | 1 | isp print level |
proc_watch_hits |
uint | 0444 | 0 | |
proc_watch_rb_hits |
uint | 0444 | 0 | |
qbuf_guard |
bool | 0644 | 1 | Reject framechan QBUF buffers outside rmem (default 1) |
t41_adr_bad_dma |
uint | 0444 | see source | |
t41_adr_bypass |
int | 0444 | -1 | ADR bypass policy: -1 follows calibration (default), 0 enables, 1 bypasses; boot-only diagnostic |
t41_adr_dropped |
uint | 0444 | see source | |
t41_adr_error |
int | 0444 | -ENODEV | |
t41_adr_frames |
uint | 0444 | ~0, t41_adr_dropped = ~0 | |
t41_adr_interval |
uint | 0644 | 1 | evaluate ADR every n-th frame (1=every frame, stock) |
t41_adr_irqs |
uint | 0444 | ~0, t41_adr_bad_dma = ~0 | |
t41_adr_stage |
uint | 0444 | ~0, t41_adr_tile = ~0 | |
t41_adr_tile |
uint | 0444 | see source | |
t41_ae_calibrated_target |
uint | 0444 | 0x80000000U | |
t41_ae_diag |
uint | 0644 | 0 | safe AE: log every sensor write (1) |
t41_ae_meter_error |
int | 0444 | -EAGAIN | |
t41_ae_meter_stage |
uint | 0444 | 0 | safe AE meter: last stage reached (1 static 2 mean 3 tables 4 target-fail 5 ok) |
t41_ae_roi_stats |
int | 0644 | 1 | copy the ROI-window AE statistics per frame for the face AE (default 1; 0 = off) |
t41_ae_zone_mean |
uint | 0444 | 0x80000000U | |
t41_af |
int | 0444 | 0 | 1 = arm the AF statistics block at ISP init (OEM tisp_af path: 0x1a000, IRQ bit 6, 4 x 4 KB DMA ring) and serve GetAfStatistics/GetAFMetricesInfo; 0 = AF off, both answer EPERM ... |
t41_ccm_ct |
uint | 0444 | 5000 | |
t41_checkpoint_ms |
uint | 0 (not in sysfs) | 0 | diagnostic delay after each TISP init checkpoint |
t41_checkpoint_start |
uint | 0 (not in sysfs) | 0 | first zero-based TISP init checkpoint to delay |
t41_clm |
uint | 0444 | 1 | CLM: 0 no LUT (old), 1 OEM LUT by CT (default), 2 bypass |
t41_clm_ct_last |
uint | 0444 | 0 | |
t41_clm_writes |
uint | 0444 | 0 | |
t41_defer_video_link_setup |
int | 0644 | -1 | defer video-pad graph mutation while isolating enable-time corruption |
t41_defog |
uint | 0444 | 1 | defog: 1 = OEM defog chain (default, registers equal the vendor), 0 = block kept in bypass |
t41_dmsc_error |
int | 0444 | -ENODEV | |
t41_dmsc_gain |
uint | 0444 | ~0 | |
t41_dn_apply_ae_irq |
int | 0644 | 1 | 1 = additionally step the day/night transition from the per-frame AE statistics interrupt while no frame-completion interrupt has arrived for 250 ms (idle camera without a consu... |
t41_dn_bank |
int | 0644 | 0x3ffff | night/day parameter bank switch steps (bit0 copy, 1 awb, 2 lsc, 3 adr, 4 dmsc, 5 gamma, 6 ccm, 7 bcsh, 8 clm, 9 ysp, 10 mdns, 11 ydns, 12 cdns, 13 sdns, 14 lce, 15 dpc, 16 tmo, ... |
t41_dn_bank_count |
uint | 0444 | 0 | |
t41_dn_bank_ret |
int | 0444 | 0 | |
t41_dn_top |
int | 0644 | 1 | apply the night/day bank TOP module bypass on a running-mode switch (1 = like stock) |
t41_dn_top_last |
uint | 0444 | 0 | |
t41_dpc_error |
int | 0444 | -ENODEV | |
t41_dpc_gain |
uint | 0444 | ~0 | |
t41_fr_phys |
uint | 0644 | 0 | |
t41_heap_census |
callback | 0444 | see source (callback) | |
t41_heap_decoys |
int | 0444 | 0 | |
t41_heap_watch |
int | 0444 | 0 | |
t41_isp_wq |
int | 0444 | 1 | 1=own ordered workqueue for AWB/tone work (stock isp_fw_process), 0=system_wq |
t41_isr_bits |
uint | &t41_isr_bits_num | 0 | |
t41_isr_calls |
uint | &t41_isr_calls_num | 0 | |
t41_isr_counts |
uint | NULL | 0 | per-index irq_func_cb call counters (hard-wired ISR list) |
t41_isr_dispatch |
callback | 0644 | see source (callback) | ISP IRQ dispatch: 0 hard-wired, 1 OEM-style table loop, 2 count-only probe |
t41_isr_dispatch_skip |
uint | NULL | { (1u << 3) / (1u << 9), 1u << (61 - 32), 0 } | |
t41_isr_enable |
callback | 0644 | see source (callback) | ISP IRQ enable words 0x40020,0x40060,0x400a0,0x400b0 (default: all but AF bit 6, all, LSC/BCSH frame-down bits 4+20, 0x3f; stock is all, all, all, 0x3f) |
t41_isr_framedown |
bool | 0644 | 1 | call the OEM LSC/BCSH frame-down callbacks (irq_func_cb[36]/[52]) from the ISR (default 1) |
t41_isr_max_us |
ullong | 0444 | 0 | |
t41_isr_us |
ullong | 0444 | 0 | |
t41_late_start_mask |
uint | 0 (not in sysfs) | 63 | capture producers to activate after connected frame-channel stream-on |
t41_lce_error |
int | 0444 | -ENODEV | |
t41_lce_frames |
uint | 0444 | ~0 | |
t41_lce_gain |
uint | 0444 | ~0 | |
t41_load_stats |
int | 0644 | 1 | count ISR status bits and time per-frame work (1=on) |
t41_lsc_ct |
uint | 0444 | see source | |
t41_lsc_error |
int | 0444 | -ENODEV | |
t41_lsc_gain |
uint | 0444 | see source | |
t41_lsc_updates |
uint | 0444 | ~0, t41_lsc_applied_ct = ~0, t41_lsc_applied_gain = ~0 | |
t41_msca_cfg_update |
int | 0644 | 2 | 2 (default) latches MSCA output geometry with the output off (needs t41_msca_stop_disable=1); 1 latches after enable; 0 never latches |
t41_msca_ch1_max_h |
uint | 0644 | 1080 | largest ch1 height SET_FMT accepts with t41_msca_cfg_update>=2 (0 = no limit) |
t41_msca_ch1_max_w |
uint | 0644 | 1920 | largest ch1 width SET_FMT accepts with t41_msca_cfg_update>=2 (0 = no limit) |
t41_msca_enable_at_frame |
int | 0644 | 0 | |
t41_msca_fifo_ctrl_after_live_qbuf |
int | 0 (not in sysfs) | 1 | negative enables T40-style control after live MSCA QBUF (default off) |
t41_msca_flip_skip_noop |
int | 0644 | 1 | 1 (default) skips the MSCA update request when HVFLIP bits are unchanged |
t41_msca_freebufs_fifo_clear |
int | 0644 | 0 | |
t41_msca_latch_timeout_ms |
int | 0644 | 300 | |
t41_msca_live_max_h |
uint | 0644 | 1080 | largest output height AutoZoom/Mask/ScalerLv reprogram while streaming |
t41_msca_live_max_w |
uint | 0644 | 1920 | largest output width AutoZoom/Mask/ScalerLv reprogram while streaming (needs t41_msca_cfg_update=2) |
t41_msca_regs |
callback | 0444 | see source (callback) | |
t41_msca_stop_disable |
int | 0644 | 1 | |
t41_native_awb_dropped |
uint | 0444 | see source | |
t41_native_awb_error |
int | 0444 | -ENODEV | |
t41_native_awb_frames |
uint | 0444 | ~0, t41_native_awb_dropped = ~0 | |
t41_proc_watch |
int | 0444 | 1 | Watch (report only, no restore) the /proc/jz/isp entries every 50 ms (default 1) |
t41_raw_diag |
uint | 0644 | see source | |
t41_raw_disable_ms |
uint | 0644 | 1000 | RAW ring disable: max wait for an RDMA frame done in ms (default 1000; 0 = vendor, no limit) |
t41_raw_irq |
bool | 0644 | 1 | call the RAW WDMA/RDMA frame-done callbacks (irq_func_cb[68]/[69]) from the ISR (default 1) |
t41_raw_ring |
bool | 0644 | 1 | serve the RAW ring controls 0x80000a7/0x80000a8 of IMP_ISP_RAW_RwControl (default 1; 0 answers -EPERM) |
t41_raw_sync |
int | 0644 | 1 | RAW ring: write back the frame from the CPU cache before the RDMA reads it (default 1) |
t41_raw_trace |
int | 0644 | 0 | log the first N RAW ring control/get/set calls (default 0) |
t41_rawinject_mb |
uint | 0444 | 10 << 20 | |
t41_reboot_quiesce |
bool | 0644 | 1 | stop and soft-reset the ISP bus master before restart/halt (default 1) |
t41_runtime_trace |
int | 0644 | 0 | enable verbose T41 frame/remote-event/IRQ recovery tracing |
t41_safe_ae_effective_target_q8 |
uint | 0444 | ~0 | current attenuation-adjusted safe-AE target in Q8 units |
t41_safe_awb_controller |
callback | 0644 | see source (callback) | negative enables and rearms the workqueue-backed T41 AWB DMA controller |
t41_stock_awb_stats_profile |
int | 0644 | -1 | nonpositive reapplies calibration-driven AWB setup after stream reset (legacy name) |
t41_stock_dpc_profile |
int | 0644 | -1 | nonpositive reapplies calibration-driven DPC after stream reset (legacy name) |
t41_stock_lce_ram_profile |
int | 0644 | -1 | nonpositive enables calibrated histogram-driven LCE (legacy name) |
t41_stock_msca_unity_curve |
int | 0644 | -1 | Commit exact-stock ratio-specific MSCA curves through shadow RAM (negative=enabled) |
t41_tmo_map_impl |
int | 0644 | 2 | local TMO map: 0=reference C, 1=fast C, 2=MXU3 (default; fast C where the CPU has no MXU3), all bit-exact |
t41_tmo_map_interval |
uint | 0644 | 1 | recompute the local TMO map every n-th frame (1=every frame, stock) |
t41_tmo_map_selftest |
callback | 0644 | see source (callback) | write 1: compare MXU3/fast/reference TMO map on random inputs (dmesg) |
t41_tmo_map_trigger |
callback | 0644 | see source (callback) | Diagnostic scalar TMO: positive EV processes current DMA, zero bypasses |
t41_tmo_on_change |
int | 0644 | 0 | 1=TMO gain/EV interpolation and default registers only on change (stock-like) |
t41_tmo_ram_fast |
int | 0644 | 0 | 1=write TMO RAM data words without a barrier per store (stock-like) |
t41_tone_trigger |
int | 0644 | 1 | 1 also runs the per-frame tone worker from the AE statistics interrupt (default 1; 0: TMO interrupt only) |
t41_vae_events |
uint | 0644 | 0 | vendor AE: forward OEM AE event ids (bitmask, default 0) |
t41_vendor_ae |
int | 0444 | 1 | run the translated vendor AE per frame (default 1; 0 = safe AE controller) |
t41_video_link_dry_run |
int | 0644 | -1 | resolve and inspect video-pad links without mutating pad state |
t41_wdr_fusion_unsafe |
int | 0444 | 0 | Run the unrecovered WDR fusion body (unsafe, default 0) |
t41_work_count |
uint | &t41_work_num | 0 | |
t41_work_max_us |
uint | &t41_work_num | 0 | |
t41_work_us |
uint | &t41_work_num | 0 | |
tmo_again_commits |
uint | 0444 | 0 | |
tmo_irq17 |
uint | 0444 | 0 | |
tmo_live |
int | 0444 | see source | |
tmo_ready |
int | 0444 | see source | |
tone_ev |
uint | 0444 | 0 | |
tone_gated |
uint | 0444 | 0 | |
tone_kicks |
uint | 0444 | 0 | |
tx_isp_bringup_level |
int | 0 (not in sysfs) | 3 | bring-up gate: -1 exports only, 0 shallow, 1 graph, 2 mem, 3 core tuning (default) |
tx_isp_core_ioctl_mask |
int | 0 (not in sysfs) | 0 | isp ioctl calls mask |
unresolved_jalr_count |
uint | 0444 | 0 | |
v4l2_autostart |
bool | 0644 | 1 | start the configured sensor when V4L2 is the first ISP consumer |
v4l2_channel |
uint | 0444 | 0 | first frame-source channel registered through V4L2 (all three exported) |
v4l2_sensor_default_boot |
int | 0644 | 0 | sensor default boot mode |
v4l2_sensor_i2c_adapter |
int | 0644 | 0 | sensor I2C adapter number |
v4l2_sensor_i2c_addr |
uint | 0644 | 0x3c | 7-bit sensor I2C address |
v4l2_sensor_id |
uint | 0644 | 0 | optional sensor instance identifier |
v4l2_sensor_mclk |
int | 0644 | 1 | sensor master-clock selector |
v4l2_sensor_name |
charp | 0644 | "os04d10" | sensor driver name used by V4L2 autostart |
v4l2_sensor_power_down_gpio |
int | 0644 | -1 | sensor power-down GPIO (-1 disables) |
v4l2_sensor_power_gpio |
int | 0644 | -1 | sensor power GPIO (-1 disables) |
v4l2_sensor_reset_gpio |
int | 0644 | -1 | sensor reset GPIO (-1 disables) |
v4l2_sensor_video_interface |
int | 0644 | 0 | sensor video input interface |
Bring-up build only: t41_ae_calibrated_metering, t41_ae_cap_again, t41_ae_cap_integration, t41_ae_comp, t41_ae_flicker_ceiling_lines, t41_ae_flicker_floor_lines, t41_ae_flicker_frequency_hz, t41_ae_flicker_gib_gain_q10, t41_ae_flicker_profile, t41_ae_target_q8, t41_ae_update_frames, t41_awb_gain_trigger, t41_awb_min_pixels, t41_awb_min_zones, t41_awb_update_irqs, t41_awb_warmup_irqs, t41_bcsh_color_model, t41_bcsh_error, t41_ccm_error, t41_cdns_error, t41_cdns_gain, t41_color_blue_correction_q10, t41_color_green_correction_q10, t41_defer_csi_start, t41_defer_isp_fw_thread, t41_defer_isp_start, t41_defer_sensor_start, t41_defer_vic_irq, t41_defer_vic_start, t41_ev_fanout_trigger, t41_gain_fanout_trigger, t41_gamma_error, t41_gamma_ev, t41_gamma_strength_value, t41_gamma_updates, t41_mdns_error, t41_mdns_gain, t41_msca_frame_shadow_commit, t41_native_awb, t41_safe_ae_again, t41_safe_ae_controller, t41_safe_ae_gain_q16, t41_safe_ae_integration, t41_safe_ae_last_mean_q8, t41_safe_awb_bank, t41_safe_awb_bgain, t41_safe_awb_irq_count, t41_safe_awb_raw_b_q10, t41_safe_awb_raw_r_q10, t41_safe_awb_reject_count, t41_safe_awb_rgain, t41_safe_awb_update_count, t41_safe_ev_fanout_mask, t41_safe_gain_fanout_mask, t41_safe_msca_start, t41_safe_tisp_teardown, t41_safe_tmo_irq_stats, t41_safe_tuning_events, t41_sdns_error, t41_sdns_gain, t41_sensor_limits_error, t41_stat_y_out, t41_stock_adr_profile, t41_stock_awb_gain_a, t41_stock_awb_gain_b, t41_stock_cdns_profile, t41_stock_dmsc_profile, t41_stock_mdns_profile, t41_stock_spatial_profile, t41_stock_tmo_profile, t41_stock_ysp_profile, t41_stock_ysp_unbypass, t41_tmo_dropped, t41_tmo_error, t41_tmo_frames, t41_tmo_replay_trigger, t41_vic_frame_sync_work, t41_ydns_error, t41_ydns_gain, t41_ysp_error, t41_ysp_gain.
27 parameters in a default build, 0 more in a bring-up build.
| Parameter | Type | Perm | Default | Description |
|---|---|---|---|---|
adr_info_addr |
ulong | 0400 | 0 | |
ae_info_addr |
ulong | 0400 | 0 | |
awb_info_addr |
ulong | 0400 | 0 | |
core_only |
bool | 0644 | 0 | |
dmsc_info_addr |
ulong | 0400 | 0 | |
gamma_info_addr |
ulong | 0400 | 0 | |
gib_info_addr |
ulong | 0400 | 0 | |
interval_ms |
uint | 0644 | 1000 | |
lce_info_addr |
ulong | 0400 | 0 | |
lsc_info_addr |
ulong | 0400 | 0 | |
memory_addr |
ulong | 0400 | 0 | |
memory_symbol |
charp | 0400 | 0 | |
memory_words |
uint | 0400 | 0 | |
msca_hardpar_addr |
ulong | 0400 | 0 | |
msca_info_addr |
ulong | 0400 | 0 | |
mscaler_addr |
ulong | 0400 | 0 | |
quality_only |
bool | 0644 | 0 | |
sequence_mode |
bool | 0644 | 0 | |
snapshot_only |
bool | 0644 | 0 | |
stat_y_out_addr |
ulong | 0400 | 0 | |
system_reg_read_addr |
ulong | 0400 | 0 | |
t31_ae_only |
bool | 0644 | 0 | |
t31_front_only |
bool | 0644 | 0 | |
t31_gib_only |
bool | 0644 | 0 | |
t31_ingress_only |
bool | 0644 | 0 | |
tmo_info_addr |
ulong | 0400 | 0 | |
ysp_info_addr |
ulong | 0400 | 0 |
Open Ingenic camera stack
- Home
- Supported SoCs and Sensors
- Per-SoC Status
- Feature Matrix
- Architecture
- Building
- Installing and Switching
- Module Parameters
- Module Parameters: complete list
- Environment Variables
- Beyond the Vendor
- API reference
- Memory
- Troubleshooting
- Reset Diagnostics
- Testing
- Test Pattern
- Performance
- Changelog
- Release Scheme
- Release Gates
- Website: status and light-box protocols
- Live feature matrix
- Project board
Current: RC3 (v2026.11.07-rc3), released 2026-11-07