Repository navigation
Glossary
This page explains the CAM and PCB terms that FlatCAM Evo uses. The terms are in alphabetical order. A term in the text of another page links here when it needs an explanation.
Alignment holes (also: alignment drills) : Holes in a board that are used as reference points. They register the top and the bottom side of a double-sided board. See Double-Sided.
Alt Subtraction : A subtraction of polygons where the first selected polygon is the target. See Geometry Editor.
Aperture : A shape that a Gerber file uses to draw copper. An aperture can be a circle, a rectangle, an obround or a macro. The Gerber Editor shows and edits the apertures. See Gerber Object.
Arc : A part of a circle. Used in the Geometry Editor and in the Gerber Editor (Arc Follow).
Bridge (gap) : A small piece of material that is not cut. It holds the board in the stock during a cutout. See Cutout.
Buffer : Makes a shape bigger or smaller by a distance. See Geometry Editor.
CNC : Computer numerical control. A machine that moves its tool by G-code commands. Examples are a CNC router, a CNC mill and a laser.
CNCJob : An object that holds the machine code (G-code) and the paths of a machine job. Made from a Geometry or an Excellon object. See CNCJob Object.
Climb milling : The tool cuts in the direction where the cutting edge leaves the material. Compare with conventional milling. See Isolation Routing.
Conventional milling : The tool cuts against the direction of travel of the material. Compare with climb milling.
Copper pour : A large copper area (a region) in a Gerber file. Used for ground planes.
Cut Z : The depth of the cut. Negative values go below the surface. The field name in the plugins is Cut Z. See Milling.
Cutout : The operation that cuts the board out of the stock along its outline. See Cutout.
Depth of cut : The distance the tool goes into the material. The plugins call it Cut Z. See Cut Z.
Dwell : A short pause at a point of the path. The Drilling and Milling plugins have a Dwell field.
Disc : A filled circle in the Gerber Editor. See Gerber Editor.
Drill : A round hole. In FlatCAM Evo, a drill is a hole in an Excellon object. See Drilling.
Drill tool : A tool that drills the holes. Each tool has a diameter. See Tool diameter.
Etch compensation : A correction of the Gerber shapes for the side etching of the board. See Etch Compensation.
Excellon : A file format for drill holes and slots. See Excellon Object.
Excellon Editor : The editor for the drill holes and the slots. See Excellon Editor.
Feed rate : The speed of the tool while it cuts. Feedrate X-Y is the speed in the plane. Feedrate Z is the speed in depth.
Fiducial : A mark on the board that the machine or the pick-and-place machine uses as a reference. See Fiducials.
Follow : Makes paths that follow the center of the copper tracks. See Follow.
Film : An output of a Gerber file as a film for printing or exposure. See Film.
Gerber : The file format of the copper, mask, silkscreen and outline layers of a PCB. See Gerber Object.
Geometry : An object that holds shapes and toolpaths (lines and polygons). Made by plugins and editors. See Geometry Object.
G-code
: The machine code. Commands such as G0 (rapid move) and G1 (linear move) tell the machine where to move. See CNCJob Object.
Grid snap
: The cursor moves in steps of the grid. Turn it on with G. See User Interface.
HUD (heads-up display)
: An overlay on the canvas that shows information. Turn it on with Shift+H.
Isolation routing : Makes a groove around each copper track and pad, so that the copper parts are separated. See Isolation Routing.
Laser power : The power of a laser for cutting or travel. Used instead of the spindle speed for a laser job.
Levelling : A correction of the height (Z) of a job for a board that is not flat. It is in development. See Levelling.
Mill / Milling : Removes material with a rotating tool. In FlatCAM Evo, the Milling plugin makes a CNC job from a Geometry or from the holes of an Excellon object. See Milling.
Mouse bites : A row of small holes that makes a break line for the cutout. The board is then broken by hand. See Cutout.
Multi-depth : A cut in several passes. Each pass goes deeper, up to the final depth. The option is Multi-Depth in the plugins. See Milling.
Multi-geometry : A Geometry object with several sets of paths, one for each tool. Compare with single-geometry. See Geometry Object.
NCC (Non-Copper Clearing) : Removes all copper that is not part of a track or a pad. Used to clear large areas. See Non-Copper Clearing.
Origin
: The point (X = 0, Y = 0) of the project. Set it with Set Origin (O). See Getting Started.
Overlap : The part of a tool pass that covers the previous pass. Given as a percentage of the tool width. The field is Overlap in the Isolation plugin.
Paint : Fills a polygon with toolpaths. Used to remove copper or to engrave a shape. See Paint.
Panelize : Makes a panel. A panel is a grid of copies of a board. See Panelize.
Passes : The number of times the tool goes around a shape. The field is Passes in the Isolation plugin.
Pad : A flat shape of copper where a part is soldered. In a Gerber file, a pad uses an aperture.
Path optimization : The order of the paths is changed to reduce the travel of the tool. Uses OR-Tools when installed. See Path Optimization.
Postprocessor / preprocessor : The code that turns the internal paths into the G-code of a machine. In FlatCAM Evo, the Preprocessor field selects it. See Preprocessors.
Project
: All objects, the settings and the layout of one job. The file extension is .FlatPrj. See Projects.
Probe : A tool that measures the height of the surface. Used by the levelling and the drilling plugins.
Region : A filled shape in a Gerber file (a polygon with copper). Not an aperture.
Rest machining : Each tool cuts only the material that the previous tool could not reach. Used with isolation and NCC. See Isolation Routing.
Single-geometry : A Geometry object with one set of paths. Compare with multi-geometry.
Simplification : Removes points of a shape that do not change the shape much. It makes the paths smaller and faster to process. See Geometry Object.
Slot : A long hole. In an Excellon file, a slot is a hole with a start and an end point.
Solder paste : Paste that is dispensed on the pads. See Solder Paste.
Spindle speed : The speed of the spindle. Set in the CNC job plugins.
Stock : The material that you cut. The board is cut out of the stock.
Tcl : A scripting language. FlatCAM Evo has a Tcl shell and scripts. See Tcl Shell.
Tool change : The machine stops and changes the tool. Set the position and the height in the plugin.
Tool diameter : The width of the cutting tool, in the units of the project. The isolation paths depend on it. The drill diameter is the diameter of the drill bit.
Tools Database : The list of tools that you can use in the plugins. See Tools Database.
Tolerance
: A distance value that the program uses for geometry operations. The application option is global_tolerance (default 0.005 mm). See Preferences Overview.
Toolpath : The path that the tool follows.
Travel Z : The height of the tool when it moves between cuts. It must clear the clamps and the board. The field is Travel Z in the Milling plugin. See Milling.
Units
: The app works in mm. A project that was saved in inches keeps inch units. The status bar shows the unit, for example [mm]. See Getting Started.
V-shape tool : A tool with a pointed tip. Its width depends on the depth of the cut. In the Isolation plugin, set the V-Tip Dia (tip diameter) and the V-Tip Angle (angle).
Z : The vertical axis. Z = 0 is the surface of the material. A negative Z goes into the material.
FlatCAM Evo Manual · Source code · Report a problem · MIT license
Start here
- Installation
- Getting Started
- Tutorial: Single-Sided PCB
- Tutorial: Double-Sided PCB
- User Interface
- Keyboard Shortcuts
- Glossary
- FAQ and Troubleshooting
Files and projects
Objects
Editors
PCB operations
- Isolation Routing
- Non-Copper Clearing
- Paint
- Cutout
- Drilling
- Milling
- Follow
- Double-Sided
- Solder Paste
- Film
- Panelize
- Copper Thieving
- Fiducials
- Markers
- Punch Gerber
- Invert Gerber
- Etch Compensation
- Extract
- Rules Check
- QR Code
Utility plugins
- Align Objects
- Calculators
- Distance · Object Distance
- Optimal
- Move · Transform
- Subtract
- Image Import · PDF Import
- PCB Wizard
- Report
- Tcl Shell
Machine control (in development)
Advanced
- Tools Database
- Preprocessors
- Path Optimization
- Tcl Scripting
- Tcl Command Reference
- Developer Guide
- Translating
Preferences