1.1.0-RC7 "Jittery Jedi"

@thinkyhead thinkyhead released this Aug 21, 2016 · 938 commits to RC since this release

New / Updated Features

  • #3611 : Add M108 command to cancel M109, M190, and M303
  • #3625, #3813, #3819, #4298 : Add Print Job Timer and statistics (PRINTCOUNTER)
  • #3653, #4106 : Add temperature watch for the heated bed (WATCH_BED_TEMP_PERIOD)
  • #3662 : New Filament Change feature (FILAMENT_CHANGE_FEATURE)
  • #3676, #4035, #4040, #4126 : New advance extrusion algorithm (LIN_ADVANCE)
  • #3720 : Use a positive flag for Host Keepalive (HOST_KEEPALIVE)
  • #3789 : Add M999 S1 to restart without flushing the buffer
  • #3806 : Add CoreYZ support, fix CoreXY, CoreXZ (COREYZ)
  • #3808, #3895 : SINGLENOZZLE basic multi-extruder support
  • #3985 : Support for inches, Fahrenheit, Kelvin (INCH_MODE_SUPPORT, TEMPERATURE_UNITS_SUPPORT)
  • #3992 : Add error-checking of E parameter in M303
  • #4013 : Add S parameter to stay in place on tool-change. Example: T1 S1
  • #4053, #4060, #4094, #4158 : Add support for the Cartesio UI (BOARD_CNCONTROLS_12)
  • #4159 : Support for RigidBot V2 and its digipot (BOARD_RIGIDBOARD_V2)
  • #4192: Support for Vellemann K8400 (BOARD_K8400)
  • #4054, #4354 : Add NOZZLE_CLEAN_FEATURE
  • #4163, #4339 : Add MIXING_EXTRUDER and SWITCHING_EXTRUDER
  • #4222 : Add P parameter to M302 (more like RepRapFirmware)
  • #4226 : Add EMERGENCY_PARSER to allow override commands
  • #4241 : Add a serial transfer buffer option (TX_BUFFER_SIZE)
  • #4244 : Dyze High Temperature Thermistor support (up to 500°C)
  • #4271, #4279 : Add X_DUAL_STEPPER_DRIVERS option
  • #4299 : Add NOZZLE_PARK_FEATURE
  • #4305 : Drop-in custom boot screens
  • #4336 : Add support for BLTouch sensor (BLTOUCH)
  • #4362 : Add DUAL_NOZZLE_DUPLICATION_MODE
  • #4408 : Add support for REPRAPWORLD_GRAPHICAL_LCD

Performance & Stability

  • #3613 : Fix an issue with sudden acceleration
  • #3642 : Suppress host keepalive during M109 / M190
  • #3650 : Prevent stuck M109 / M190 if a target temperature is changed
  • #3661 : Fix handling of UTF-8 characters in SD card filenames
  • #3751 : Fix long G2/G3 arcs blocking machine idle
  • #3757 : Don't allow setting auto fan pins in M42
  • #3781 : Improved performance in Delta movement
  • #3788 : Improvements for Dual X Carriage
  • #3797 : Less blocking in G2, G3, and G5
  • #3828 : Fix endstops default enabled state
  • #3829, #4010 : Fix position adjustment when switching extruders
  • #3888 : Fix issues with MAX31855 thermocouples
  • #3909 : Fix initialization of some arrays
  • #3939, #4214 : Reduce positional error, clear command queue on "Stop print"
  • #3955, #3958 : Fix M428 for compatibility with Delta and SCARA
  • #3995, #4140 : Beeps and tones no longer stall execution
  • #4012 : Prevent bad watchdog timeouts
  • #4092 : Add reporting of SD read errors
  • #4095, #4097 : Fix issues with Filament Runout Sensor
  • #4165 : Bring RUMBA pins file up to current methods
  • #4167 : Add a checksum to the EEPROM to detect errors
  • #4169 : Fix wait-for-cooling in M109 / M190
  • #4204 : Adjust software endstops, if needed, on tool-change
  • #4250 : Adjust wait-for-cooling timeout
  • #4253, #4257 : Broader support for filament runout sensor
  • #4256, #4278, #4291 : Optimizations for single-hotend setups
  • #4258, #4287, #4321, #4327, #4374, #4376, #4390 : Fix and improve print job timer and counter
  • #4280 : Fix write-to-file serial output
  • #4287 : Support for prints over 18h 12m 15s in the print counter
  • #4360 : Fix issues with G28 when T0 isn't the active tool
  • #4365 : Tweak planner acceleration constraint
  • #4370 : Add DELTA forward kinematics (to get XYZ from ABC)
  • #4389 : Optimize planner code with less float division
  • #4402 : Fix bugs related to the shifted coordinate space

Configuration

  • #3609 : Add versioning to the configuration files
  • #3632 : Simplified language setting in Configuration.h
  • #3672 : Simplified probe configuration
  • #3702 : Simplified pins files
  • #3779 : Automatic assignment of X2, Y2, Z2 stepper connectors
  • #3928 : Clean up Delta configuration examples
  • #4065 : Remove support for XY servo endstops
  • #4252, #4292 : Generalize options that specify PLA and ABS
  • #4296 : Update BQ Hephestos 2 configuration
  • #4306 : Replace ENDSTOPS_ONLY_FOR_HOMING with ENDSTOPS_ALWAYS_ON_DEFAULT
  • #4337 : Change endstop-inverting options from const bool to define
  • #4398, #4400 : Sanity checking of safe homing, temp sensors
  • #4414 : Remove all #include from Configuration.h / Configuration_adv.h

Homing and Bed Leveling

  • #3707 : Fix curved movements in G29 for Delta
  • #3775 : Report current position to host after G29
  • #3782 : Require homing of Z before G29 bed leveling
  • #3798 : Allow using probe indices (I and J) with M421 Set Probe Point
  • #3942 : Fix servo probe raise in G28 and other non-leveling contexts
  • #4021, #4066, #4085, #4093, #4108 : Allow the use of probes without Auto Bed Leveling
  • #4181 : Fix curved movements in Allen Key deploy & stow
  • #4207 : Clean up Allen Key code, allow use on Cartesian machines
  • #4217, #4235 : Fix MIN_Z_HEIGHT_FOR_HOMING cumulative raising
  • #4307, #4320, #4323, #4342, #4356, #4358, #4361, #4368, #4373, #4381, #4387 : Major cleanup of homing and leveling
  • #4308, #4330, #4378, #4379 : Improved logging of homing and leveling

Mesh (Manual) Bed Leveling

  • #3760, #3903, #3911 : Improved Mesh (Manual) Bed Leveling
  • #3802 : Add MBL resting position after homing (MESH_G28_REST_ORIGIN)
  • #3956, #4199 : Keep Mesh Bed Leveling active when homing X, Y, or Z alone
  • #4146 : Allow Mesh Bed Leveling to work when homing to max Z
  • #4154 : Use Z_RAISE_BETWEEN_PROBINGS for Mesh (Manual) Bed Leveling
  • #4202 : Fix position adjustment for MBL when switching tools

LCD Controllers

  • #3110, #4001 : Improved axis movement from the LCD controller
  • #3670 : Use directional buttons on controllers that have them
  • #3739 : Option to reverse the encoder wheel (REVERSE_ENCODER_DIRECTION)
  • #3740 : Add individual axis homing to the LCD menu
  • #3762 : Don't display heated bed on Graphical LCD if no heated bed
  • #3914, #3944 : Fix LCD contrast adjustment range for different panels
  • #3936 : Support for SAV_3DGLCD OLED LCD controller
  • #4025 : Fix manual LCD movement with multiple extruders
  • #4057 : Show millimeters (not steps) moved in LCD babystepping
  • #4168, #4277 : Support VIKI2 display with RAMPS and MKS 1.3 / 1.4
  • #4188, #4201 : Add Printer Info and Printer Statistics to the LCD menu
  • #4243, #4309 : Improve static/scrolling LCD screens
  • #4254 : Show full kill screen (not just message line)
  • #4265 : All new beeper / speaker / buzzer code and tone queue
  • #4285 : Remove delay for small manual encoder axis moves
  • #4357, #3957 : Improvements for the RepRapWorld Keypad

Languages

For Developers

Downloads