Skip to content

4.0.1 – Fixes

Latest

Choose a tag to compare

@Mastershort Mastershort released this 22 Nov 15:43

A fix round after 4.0: the phone's list no longer calls a closed garage door open, a second plan stops flooding the Home Assistant log, and thin things on the wall are as thin as the plan says.

Fixed

  • A closed garage door counted as open in the phone's list "What is going on?", and an open one did not: its reading was taken the wrong way round (#1261, #1276).
  • A view of a second plan flooded the Home Assistant log ("invalid_format" at view.plan), and that screen got no announcements or voice answers (#1242).
  • Socket, light switch and sensors on the wall stood 5 cm out of it in 3D while the plan showed them thin. A socket is its 1.4 cm again, and a sensor can be made thinner by hand (#1236).
  • A hedge, fence or pergola on falling ground showed its underside: it now reaches down into the lawn below it (#1262).
  • Cupboard fronts stayed dark blue under a zoom style while the house around them was already homely (#1259).
  • The house's shadow was missing on a dashboard card with a heatmap (#1196).
  • A finger on a label, a pin or a glass card turns the house like a finger on free picture. On an Android phone the browser took such a sideways move for its "back" swipe and the dashboard came up instead (#1248).
  • The mouse turns and zooms over markers too: the wheel over a pin, a room name or a glass card zooms the house, and a drag that begins there turns it (#1271).
  • The way out of full screen stays: the ✕ no longer disappears with the card's other buttons, so a card in full screen cannot trap you.
  • The plan list says why the main plan has no bin instead of leaving the row empty (#1258).
  • Pack "Digital picture frames": the content of a standing frame sat on its back instead of on the front (#1264). The corrected pack comes as an update from the shop.

Thanks to Atomiiik, beta-j, Skeletitor, murilokasper, Habi01H, daene85, erwinsnl, netrunnercs, michaelbell1981, RiotEd, snurre0, 1970lexi, K3ngur and blitzwurst for the reports.

How to update: Settings → System → Updates (Home Assistant before 2026.11: HACS → NeonPlan 3D → ⋮ → Update information → Download), restart Home Assistant, then Ctrl+F5.

Runs on old wall tablets as always. Found a bug? Please open an issue on GitHub.


Eine Runde Korrekturen nach 4.0: Die Liste am Handy nennt ein geschlossenes Garagentor nicht mehr offen, ein zweiter Plan flutet das Protokoll von Home Assistant nicht mehr, und Dünnes an der Wand ist so dünn, wie der Plan es zeigt.

Behoben

  • Ein geschlossenes Garagentor zählte als offen in der Liste „Was ist los?“ am Handy, ein offenes dagegen nicht: Sein Wert wurde falsch herum gelesen (#1261, #1276).
  • Die Ansicht eines zweiten Plans flutete das Protokoll von Home Assistant („invalid_format“ bei view.plan), und dieser Bildschirm bekam keine Durchsagen und Sprachantworten (#1242).
  • Steckdose, Lichtschalter und Sensoren an der Wand standen in 3D 5 cm heraus, während der Plan sie dünn zeigte. Eine Steckdose hat wieder ihre 1,4 cm, und ein Sensor lässt sich von Hand dünner machen (#1236).
  • Eine Hecke, ein Zaun oder eine Pergola am Hang zeigte die Unterseite: Sie reicht jetzt bis in den Rasen darunter (#1262).
  • Schrankfronten blieben unter einem Zoom-Stil dunkelblau, während das Haus drumherum schon wohnlich war (#1259).
  • Der Hausschatten fehlte auf einer Dashboard-Karte mit Heatmap (#1196).
  • Ein Finger auf einem Schild, einer Markierung oder einer Glaskarte dreht das Haus wie ein Finger auf freiem Bild. Am Android-Handy hielt der Browser so eine Bewegung zur Seite für sein „Zurück“-Wischen, und es erschien das Dashboard (#1248).
  • Die Maus dreht und zoomt auch über Markierungen: Das Rad über einer Markierung, einem Raumnamen oder einer Glaskarte zoomt das Haus, und ein Ziehen, das dort beginnt, dreht es (#1271).
  • Der Weg aus dem Vollbild bleibt: Das ✕ verschwindet nicht mehr mit den anderen Knöpfen der Karte, eine Karte im Vollbild kann einen also nicht mehr einsperren.
  • Die Planliste sagt, warum der Hauptplan keinen Papierkorb hat, statt die Zeile leer zu lassen (#1258).
  • Pack „Digitale Bilderrahmen“: Der Inhalt eines stehenden Rahmens saß auf der Rückseite statt vorn (#1264). Das korrigierte Pack kommt als Update aus dem Shop.

Danke an Atomiiik, beta-j, Skeletitor, murilokasper, Habi01H, daene85, erwinsnl, netrunnercs, michaelbell1981, RiotEd, snurre0, 1970lexi, K3ngur und blitzwurst für die Meldungen.

So aktualisierst du: Einstellungen → System → Updates (Home Assistant vor 2026.11: HACS → NeonPlan 3D → ⋮ → Update-Informationen → Herunterladen), Home Assistant neu starten, dann Strg+F5.

Läuft wie immer auch auf alten Wandtablets. Fehler gefunden? Bitte ein Issue auf GitHub öffnen.