Skip to content

Releases

Namco System 11 v0.3.0

Choose a tag to compare

@github-actions github-actions released this 12 Nov 22:31

Beta of the Namco System 11 arcade core for the Analogue Pocket (port of SYSTEM11_MiSTer, built on the openFPGA PlayStation core).

What's new in v0.3.0

  • Analog stick works as a d-pad. On a Dock controller with an analog stick, pushing the left stick more than about halfway
    also presses the d-pad, diagonals included, so Tekken, Tekken 2, Soul Edge and the other d-pad games can be played with the
    stick. This applies to players 1 and 2, and the d-pad works as before.
    • Point Blank 2 and Gunbarl still aim proportionally with the stick, as in v0.2.1.
    • Handheld play is unchanged: the Pocket has no analog stick.

Everything from v0.2.2 is included: game settings saved between launches, and core settings (DIP1 Test, DIP2 Freeze, Service
button, Gun aim speed) that take effect.

Install: unzip onto the root of the SD card. The core appears under openFPGA > Arcade Multi > Namco System 11.
ROMs and the C76 BIOS are not included: build the game files from your own current-MAME romsets with the
Pocket Sync / pupdate plugin or tools/make_games.py (see the README).
pupdate and Pocket Sync list each game's required files.

Tested on a Pocket: every game: Tekken, Tekken 2, Soul Edge, Xevious 3D/G, Dancing Eyes, Dunk Mania, Star Sweep,
Pocket Racer, Prime Goal EX, Kosodate Quiz My Angel 3, Point Blank 2 and Gunbarl, plus alternative versions of Tekken,
Tekken 2 and Point Blank 2.

Known limitations: to change game, quit the core and open it again (no Load game);
of the versions in _alternatives, only those of Tekken, Tekken 2 and Point Blank 2 have been tried.

Support me on Ko-fi

Build: fitter seed 44, worst-case timing slack -0.008 ns.

Fit summary
Fitter Status : Successful - Thu Nov 12 22:29:48 2026
Quartus Prime Version : 18.1.1 Build 646 04/11/2019 SJ Lite Edition
Revision Name : s11full
Top-level Entity Name : apf_top
Family : Cyclone V
Device : 5CEBA4F23C8
Timing Models : Final
Logic utilization (in ALMs) : 18,190 / 18,480 ( 98 % )
Total registers : 17194
Total pins : 224 / 224 ( 100 % )
Total virtual pins : 0
Total block memory bits : 1,372,577 / 3,153,920 ( 44 % )
Total RAM Blocks : 237 / 308 ( 77 % )
Total DSP Blocks : 51 / 66 ( 77 % )
Total HSSI RX PCSs : 0
Total HSSI PMA RX Deserializers : 0
Total HSSI TX PCSs : 0
Total HSSI PMA TX Serializers : 0
Total PLLs : 3 / 4 ( 75 % )
Total DLLs : 0 / 4 ( 0 % )

Full Changelog: v0.2.2...v0.3.0

Namco System 11 v0.2.2

Choose a tag to compare

@github-actions github-actions released this 06 Nov 23:29

Beta of the Namco System 11 arcade core for the Analogue Pocket (port of SYSTEM11_MiSTer, built on the openFPGA PlayStation core).

What's new in v0.2.2

  • Beta. Every game in the list has now been tested as working on a Pocket, including Dunk Mania and Star Sweep, and the
    alternative versions of Tekken, Tekken 2 and Point Blank 2. Tekken 2's longer combos (King's 10-hit combo) work.
  • Game settings are saved. Changes made in a game's test menu (difficulty, rounds, coinage and so on) are now kept: each
    game gets its own .sav under Saves/namco_system11/ when you quit the core, and it is loaded the next time you open that
    game. After changing a setting, leave the test menu and wait a couple of seconds before quitting.
    • Earlier versions never wrote a save at all. The core did not tell the Pocket how big the save was.
  • Core settings work. DIP1 Test, DIP2 Freeze, Service button (held) and Gun aim speed never took effect in earlier
    versions: the core read the setting values with their bytes in the wrong order. They now do.
    • DIP1 Test opens the game's test menu at start-up.
    • Service button (held) is the cabinet's service button: switching it on adds a service credit.
    • DIP2 Freeze is passed to the game; most games, Tekken 2 among them, ignore it.
  • Point Blank 2's test menu needs the Dock. To change Point Blank 2's settings, use the Dock with two controllers
    connected, for player 1 and player 2: the game's test menu needs both players' controls.
  • New fitter seed (44): the design changed, and seed 44 gives the best timing yet.

Tested on a Pocket: Tekken 2 settings kept across launches, DIP1 Test, Service button and Gun aim speed, and games loading
normally after quitting the core.

Install: unzip onto the root of the SD card. The core appears under openFPGA > Arcade Multi > Namco System 11.
ROMs and the C76 BIOS are not included: build the game files from your own current-MAME romsets with the
Pocket Sync / pupdate plugin or tools/make_games.py (see the README).
pupdate and Pocket Sync list each game's required files.

Tested on a Pocket: every game: Tekken, Tekken 2, Soul Edge, Xevious 3D/G, Dancing Eyes, Dunk Mania, Star Sweep,
Pocket Racer, Prime Goal EX, Kosodate Quiz My Angel 3, Point Blank 2 and Gunbarl, plus alternative versions of Tekken,
Tekken 2 and Point Blank 2.

Known limitations: to change game, quit the core and open it again (no Load game);
of the versions in _alternatives, only those of Tekken, Tekken 2 and Point Blank 2 have been tried.

Build: fitter seed 44, worst-case timing slack -0.036 ns.

Fit summary
Fitter Status : Successful - Fri Nov  6 23:25:56 2026
Quartus Prime Version : 18.1.1 Build 646 04/11/2019 SJ Lite Edition
Revision Name : s11full
Top-level Entity Name : apf_top
Family : Cyclone V
Device : 5CEBA4F23C8
Timing Models : Final
Logic utilization (in ALMs) : 18,221 / 18,480 ( 99 % )
Total registers : 17193
Total pins : 224 / 224 ( 100 % )
Total virtual pins : 0
Total block memory bits : 1,372,577 / 3,153,920 ( 44 % )
Total RAM Blocks : 237 / 308 ( 77 % )
Total DSP Blocks : 51 / 66 ( 77 % )
Total HSSI RX PCSs : 0
Total HSSI PMA RX Deserializers : 0
Total HSSI TX PCSs : 0
Total HSSI PMA TX Serializers : 0
Total PLLs : 3 / 4 ( 75 % )
Total DLLs : 0 / 4 ( 0 % )

Full Changelog: v0.2.1...v0.2.2

Namco System 11 v0.2.1

Choose a tag to compare

@github-actions github-actions released this 29 Oct 22:27

Beta of the Namco System 11 arcade core for the Analogue Pocket (port of SYSTEM11_MiSTer, built on the openFPGA PlayStation core).

What's new in v0.2.1

  • Point Blank 2 and Gunbarl can be played. Until now the guns were fixed at the centre of the screen, so the gun games
    could not be aimed. Each player now aims with the left stick or the d-pad (player 1 on pad 1, player 2 on pad 2) and fires
    with any face button.
    • The d-pad moves slowly for the first quarter of a second, for fine aim, then speeds up to full speed; the stick is
      proportional.
    • A MAME-style sight shows where each player is aiming: blue for player 1, red for player 2 once player 2 joins.
    • New setting Gun aim speed (Normal, Slow, Fast).
  • Point Blank 2 no longer freezes in the armour mini-game. The picture stopped (with the sound still playing) about 10
    seconds into the "shoot the armour off" stage. The game resets the GPU's command buffer while playing, and the core's GPU,
    still busy drawing, was cut off mid-way. For the gun games that reset now only restarts the command framing, as in MAME and
    as the core already did for Tekken.

Tested on a Pocket: Point Blank 2 (ptblank2a) and Gunbarl (gunbarla), with one and two players, handheld and docked.

Install: unzip onto the root of the SD card. The core appears under openFPGA > Arcade Multi > Namco System 11.
ROMs and the C76 BIOS are not included: build the game files from your own current-MAME romsets with the
Pocket Sync / pupdate plugin or tools/make_games.py (see the README).
pupdate and Pocket Sync list each game's required files.

Tested on a Pocket: Tekken, Tekken 2, Soul Edge, Xevious 3D/G, Dancing Eyes, Pocket Racer, Prime Goal EX, Kosodate Quiz My Angel 3, Point Blank 2 / Gunbarl, Dunk Mania and Star Sweep.

Known limitations: to change game, quit the core and open it again (no Load game); game settings (EEPROM) are
not kept between launches yet; not every regional version in _alternatives has been tried.

Build: fitter seed 22, worst-case timing slack -0.047 ns.

Fit summary
Fitter Status : Successful - Thu Oct 29 22:24:24 2026
Quartus Prime Version : 18.1.1 Build 646 04/11/2019 SJ Lite Edition
Revision Name : s11full
Top-level Entity Name : apf_top
Family : Cyclone V
Device : 5CEBA4F23C8
Timing Models : Final
Logic utilization (in ALMs) : 18,198 / 18,480 ( 98 % )
Total registers : 17188
Total pins : 224 / 224 ( 100 % )
Total virtual pins : 0
Total block memory bits : 1,372,577 / 3,153,920 ( 44 % )
Total RAM Blocks : 237 / 308 ( 77 % )
Total DSP Blocks : 51 / 66 ( 77 % )
Total HSSI RX PCSs : 0
Total HSSI PMA RX Deserializers : 0
Total HSSI TX PCSs : 0
Total HSSI PMA TX Serializers : 0
Total PLLs : 3 / 4 ( 75 % )
Total DLLs : 0 / 4 ( 0 % )

Full Changelog: v0.1.4...v0.2.1

Namco System 11 v0.1.4

Choose a tag to compare

@github-actions github-actions released this 27 Oct 23:21

Beta of the Namco System 11 arcade core for the Analogue Pocket (port of SYSTEM11_MiSTer, built on the openFPGA PlayStation core).

What's new in v0.1.4

  • No line at the top of the picture on the Pocket's screen. A short line showed above or at the top of the picture on the
    handheld (top right in Tekken and Tekken 2, top left in Soul Edge); the Dock was not affected. The core sent the Pocket's
    scaler one extra black line before each frame and the scaler only partly wrote it. Frames now go out without it and always
    with an even number of lines, as in version 0.5.6 of the PlayStation core.
  • Pocket Racer can be steered with the d-pad. On the Pocket's own controls and on controllers without analog sticks, the
    car could not be steered and the menus did not respond: the core read those controllers' unused sticks as held at full
    lock. Sticks are now read only from controllers that have them. Left/right on the d-pad steers (a virtual wheel that turns
    while held and re-centres when let go), and an analog stick on the Dock still steers too.

Tested on a Pocket, handheld and docked: Tekken, Tekken 2, Soul Edge, Xevious 3D/G and Pocket Racer.

Install: unzip onto the root of the SD card. The core appears under openFPGA > Arcade Multi > Namco System 11.
ROMs and the C76 BIOS are not included: build the game files from your own current-MAME romsets with the
Pocket Sync / pupdate plugin or tools/make_games.py (see the README).
pupdate and Pocket Sync list each game's required files.

Tested on a Pocket: Tekken, Tekken 2, Soul Edge, Xevious 3D/G, Dancing Eyes, Pocket Racer, Prime Goal EX
and Kosodate Quiz My Angel 3. Not tested yet: Point Blank 2 / Gunbarl, Dunk Mania and Star Sweep.

Known limitations: to change game, quit the core and open it again (no Load game); game settings (EEPROM) are
not kept between launches yet; not every regional version in _alternatives has been tried.

Build: fitter seed 22, worst-case timing slack -0.201 ns.

Fit summary
Fitter Status : Successful - Tue Oct 27 23:18:58 2026
Quartus Prime Version : 18.1.1 Build 646 04/11/2019 SJ Lite Edition
Revision Name : s11full
Top-level Entity Name : apf_top
Family : Cyclone V
Device : 5CEBA4F23C8
Timing Models : Final
Logic utilization (in ALMs) : 17,832 / 18,480 ( 96 % )
Total registers : 16988
Total pins : 224 / 224 ( 100 % )
Total virtual pins : 0
Total block memory bits : 1,372,463 / 3,153,920 ( 44 % )
Total RAM Blocks : 236 / 308 ( 77 % )
Total DSP Blocks : 47 / 66 ( 71 % )
Total HSSI RX PCSs : 0
Total HSSI PMA RX Deserializers : 0
Total HSSI TX PCSs : 0
Total HSSI PMA TX Serializers : 0
Total PLLs : 3 / 4 ( 75 % )
Total DLLs : 0 / 4 ( 0 % )

Full Changelog: v0.1.3...v0.1.4

Namco System 11 v0.1.3

Choose a tag to compare

@github-actions github-actions released this 25 Oct 22:57

Beta of the Namco System 11 arcade core for the Analogue Pocket (port of SYSTEM11_MiSTer, built on the openFPGA PlayStation core).

Install: unzip onto the root of the SD card. The core appears under openFPGA > Arcade Multi > Namco System 11.
ROMs and the C76 BIOS are not included: build the game files from your own current-MAME romsets with the
Pocket Sync / pupdate plugin or tools/make_games.py (see the README).
pupdate and Pocket Sync list each game's required files.

Tested on a Pocket: Tekken, Tekken 2, Soul Edge, Xevious 3D/G, Dancing Eyes, Pocket Racer, Prime Goal EX
and Kosodate Quiz My Angel 3. Not tested yet: Point Blank 2 / Gunbarl, Dunk Mania and Star Sweep.

Known limitations: to change game, quit the core and open it again (no Load game); game settings (EEPROM) are
not kept between launches yet; not every regional version in _alternatives has been tried.

Build: fitter seed 22, worst-case timing slack -0.246 ns.

Fit summary
Fitter Status : Successful - Sun Oct 25 22:55:04 2026
Quartus Prime Version : 18.1.1 Build 646 04/11/2019 SJ Lite Edition
Revision Name : s11full
Top-level Entity Name : apf_top
Family : Cyclone V
Device : 5CEBA4F23C8
Timing Models : Final
Logic utilization (in ALMs) : 17,825 / 18,480 ( 96 % )
Total registers : 16923
Total pins : 224 / 224 ( 100 % )
Total virtual pins : 0
Total block memory bits : 1,372,379 / 3,153,920 ( 44 % )
Total RAM Blocks : 235 / 308 ( 76 % )
Total DSP Blocks : 47 / 66 ( 71 % )
Total HSSI RX PCSs : 0
Total HSSI PMA RX Deserializers : 0
Total HSSI TX PCSs : 0
Total HSSI PMA TX Serializers : 0
Total PLLs : 3 / 4 ( 75 % )
Total DLLs : 0 / 4 ( 0 % )

Full Changelog: v0.1.2...v0.1.3

Namco System 11 v0.1.2

Choose a tag to compare

@McNast13 McNast13 released this 24 Oct 18:15

Namco System 11 arcade core for the Analogue Pocket: a port of SYSTEM11_MiSTer, built on the openFPGA PlayStation core.

Install: unzip onto the root of the SD card. The core appears under openFPGA > Arcade Multi > Namco System 11.
ROMs and the C76 BIOS are not included: build the game files from your own current-MAME romsets with
tools/make_games.py from this repository, and put c76.bin (from namcoc76.zip) in Assets/namco_system11/common/ (see the README).
pupdate and Pocket Sync list each game's required files. The game list shows the main version of each game; other versions are in _alternatives.

Tested on a Pocket: Tekken, Tekken 2, Soul Edge, Xevious 3D/G, Dancing Eyes, Pocket Racer, Prime Goal EX
and Kosodate Quiz My Angel 3. Not tested yet: Point Blank 2 / Gunbarl, Dunk Mania and Star Sweep.

Known limitations: to change game, quit the core and open it again (no Load game); game settings (EEPROM) are
not kept between launches yet; not every regional version in _alternatives has been tried.

Since v0.1.1: the core's author icon (shown on its About screen) replaces the plain placeholder. The FPGA bitstream is
unchanged: the same seed-22 build as v0.1.1, tested on a Pocket.

Build: fitter seed 22, worst-case timing slack -0.229 ns.

Fit summary
Fitter Status : Successful - Sat Oct 24 17:27:35 2026
Quartus Prime Version : 18.1.1 Build 646 04/11/2019 SJ Lite Edition
Revision Name : s11full
Top-level Entity Name : apf_top
Family : Cyclone V
Device : 5CEBA4F23C8
Timing Models : Final
Logic utilization (in ALMs) : 18,089 / 18,480 ( 98 % )
Total registers : 17163
Total pins : 224 / 224 ( 100 % )
Total virtual pins : 0
Total block memory bits : 1,372,385 / 3,153,920 ( 44 % )
Total RAM Blocks : 236 / 308 ( 77 % )
Total DSP Blocks : 47 / 66 ( 71 % )
Total HSSI RX PCSs : 0
Total HSSI PMA RX Deserializers : 0
Total HSSI TX PCSs : 0
Total HSSI PMA TX Serializers : 0
Total PLLs : 3 / 4 ( 75 % )
Total DLLs : 0 / 4 ( 0 % )

Namco System 11 v0.1.1

Choose a tag to compare

@McNast13 McNast13 released this 24 Oct 17:51

Namco System 11 arcade core for the Analogue Pocket: a port of SYSTEM11_MiSTer, built on the openFPGA PlayStation core.

Install: unzip onto the root of the SD card. The core appears under openFPGA > Arcade Multi > Namco System 11.
ROMs and the C76 BIOS are not included: build the game files from your own current-MAME romsets with
tools/make_games.py from this repository, and put c76.bin (from namcoc76.zip) in Assets/namco_system11/common/ (see the README).
pupdate and Pocket Sync list each game's required files. The game list shows the main version of each game; other versions are in _alternatives.

Tested on a Pocket: Tekken, Tekken 2, Soul Edge, Xevious 3D/G, Dancing Eyes, Pocket Racer, Prime Goal EX
and Kosodate Quiz My Angel 3. Not tested yet: Point Blank 2 / Gunbarl, Dunk Mania and Star Sweep.

Known limitations: to change game, quit the core and open it again (no Load game); game settings (EEPROM) are
not kept between launches yet; not every regional version in _alternatives has been tried.

Since v0.1.0-beta: this is the build tested on a Pocket (fitter seed 22). v0.1.0-beta was first published with this same
seed-22 bitstream before it had been run, then its zip was swapped for the seed-99 build that had been; seed 22 has since been
tested and has the better timing, so it is the release.

Build: fitter seed 22, worst-case timing slack -0.229 ns.

Fit summary
Fitter Status : Successful - Sat Oct 24 17:27:35 2026
Quartus Prime Version : 18.1.1 Build 646 04/11/2019 SJ Lite Edition
Revision Name : s11full
Top-level Entity Name : apf_top
Family : Cyclone V
Device : 5CEBA4F23C8
Timing Models : Final
Logic utilization (in ALMs) : 18,089 / 18,480 ( 98 % )
Total registers : 17163
Total pins : 224 / 224 ( 100 % )
Total virtual pins : 0
Total block memory bits : 1,372,385 / 3,153,920 ( 44 % )
Total RAM Blocks : 236 / 308 ( 77 % )
Total DSP Blocks : 47 / 66 ( 71 % )
Total HSSI RX PCSs : 0
Total HSSI PMA RX Deserializers : 0
Total HSSI TX PCSs : 0
Total HSSI PMA TX Serializers : 0
Total PLLs : 3 / 4 ( 75 % )
Total DLLs : 0 / 4 ( 0 % )

Namco System 11 v0.1.0-beta

Pre-release

Choose a tag to compare

@github-actions github-actions released this 24 Oct 17:31

Superseded by v0.1.1. This beta was first published with a fitter seed 22
bitstream that had not yet been run on a Pocket; about 20 minutes later its zip was replaced with the seed 99 build that had been.
Seed 22 was then tested on a Pocket (same design, more timing margin) and released as v0.1.1. The zip below is the seed 99 build.

Beta of the Namco System 11 arcade core for the Analogue Pocket (port of SYSTEM11_MiSTer, built on the openFPGA PlayStation core).

Install: unzip onto the root of the SD card. The core appears under openFPGA > Arcade Multi > Namco System 11.
ROMs and the C76 BIOS are not included: build the game files from your own current-MAME romsets with
tools/make_games.py, and put c76.bin (from namcoc76.zip) in Assets/namco_system11/common/ (see the README).
pupdate and Pocket Sync list each game's required files.

Tested on a Pocket: Tekken, Tekken 2, Soul Edge, Xevious 3D/G, Dancing Eyes, Pocket Racer, Prime Goal EX
and Kosodate Quiz My Angel 3. Not tested yet: Point Blank 2 / Gunbarl, Dunk Mania and Star Sweep.

Known limitations: to change game, quit the core and open it again (no Load game); game settings (EEPROM) are
not kept between launches yet; not every regional version in _alternatives has been tried.

Build: fitter seed 99, the bitstream tested on a Pocket (worst-case timing slack -0.562 ns).

Fit summary
Fitter Status : Successful - Sat Oct 24 15:28:36 2026
Quartus Prime Version : 18.1.1 Build 646 04/11/2019 SJ Lite Edition
Revision Name : s11full
Top-level Entity Name : apf_top
Family : Cyclone V
Device : 5CEBA4F23C8
Timing Models : Final
Logic utilization (in ALMs) : 18,066 / 18,480 ( 98 % )
Total registers : 17163
Total pins : 224 / 224 ( 100 % )
Total virtual pins : 0
Total block memory bits : 1,372,385 / 3,153,920 ( 44 % )
Total RAM Blocks : 236 / 308 ( 77 % )
Total DSP Blocks : 47 / 66 ( 71 % )
Total HSSI RX PCSs : 0
Total HSSI PMA RX Deserializers : 0
Total HSSI TX PCSs : 0
Total HSSI PMA TX Serializers : 0
Total PLLs : 3 / 4 ( 75 % )
Total DLLs : 0 / 4 ( 0 % )

Full Changelog: https://github.com/McNast13/NamcoSystem11-Pocket/commits/v0.1.0-beta