Repository navigation
Releases
StrataField v1.0.15
What's new in 1.0.15
Changed
- Column pipe size is in millimetres (for example 32, 40 or 50), not inches. A size typed in
1.0.14 keeps its number, so open that borewell and correct it. - In the PDF report, every layer's name is written on the layer itself, also for thin layers,
which get smaller letters. Before, the names of thin layers were written to the right of the
drawing.
Installing StrataField
- Download StrataField_…_x64-setup.exe below (under Assets).
- Double-click it.
- If Windows shows "Windows protected your PC", choose More info, then Run anyway. Windows shows this for new programs that are not yet signed.
- Follow the installer. No administrator password is needed; StrataField is installed just for you.
- Open StrataField from the Start menu. Getting started with StrataField, a short guide you can print, is there too.
Works on Windows 10 and 11. If this computer had the older StrataField, your borewells are brought over automatically the first time it opens; the old file is not changed.
Already have StrataField? It offers this update by itself: choose Install and restart when asked, or go to Settings & backup → About → Check for updates. (Copies from version 1.0.0 need this installer once; after that, updates are automatic.) Your data is kept.
Uninstalling removes the app but keeps your data in %APPDATA%\Strata.
More help: INSTALL.md · Security: SECURITY.md
The .sig file and latest.json are used by the app's automatic updates; you don't need to download them.
StrataField v1.0.14
What's new in 1.0.14
New
- Column pipe and power supply. With the pump you can now record the column pipe's size and
whether it is PVC or MS (mild steel), and whether the pump runs on single phase or three phase.
They are shown on the borewell's page, in the PDF report and in the Excel export. - The borewell drawing marks the depth where each layer changes (0, 50, 95, 135 …) on screen
as well, as the PDF report already did, so each layer's thickness can be read off. Before, the
screen showed even steps (0, 50, 100 …). - The Borewells list stays as you left it. Open a borewell from a search and come back, with
Back to Borewells or the back key, and the search, filters and sorting are still there. - Choosing a borewell in the Map's list takes the map to it, also when it was off the map or
inside a group of pins. - Click a photo to open it full size in your photo viewer.
- Export shows how far it has got. A long export counts the borewells as it collects them and
as it draws each page of the report, and collecting them is quicker. - Edit details keeps what you typed. Leaving the screen before saving no longer loses your
changes. They are there when you open Edit details for that borewell again, with a button to
discard them.
Fixed
- A screen that cannot read the borewells now says so. The Map, Home, Cross-section, Export
and Add locations screens used to look as if there were no borewells at all. - A fault while leaving a screen no longer blanks the window. It shows the same message as a
screen that fails, with a button to try again. - A new borewell is saved in one go. Its details, layers and pipes are saved together, so a
problem part-way can no longer leave a borewell without its layers, or add it a second time when
you press Save again. A photo or file that cannot be copied is named, and the borewell is saved
without it. - The last change to a borewell's layers could be lost when you pressed Done, or went to
another screen, within a second of making it, while the screen still said "Saving shortly…".
It is now saved as you leave. - The map jumped back to the first borewell. After "Show on map", choosing any other borewell
moved the map back to the one you came from. It now stays where you put it until "Show all".
Faster
- Screens open straight away. The borewell list is loaded once and shared by every screen,
instead of being loaded again each time a screen opens.
Installing StrataField
- Download StrataField_…_x64-setup.exe below (under Assets).
- Double-click it.
- If Windows shows "Windows protected your PC", choose More info, then Run anyway. Windows shows this for new programs that are not yet signed.
- Follow the installer. No administrator password is needed; StrataField is installed just for you.
- Open StrataField from the Start menu. Getting started with StrataField, a short guide you can print, is there too.
Works on Windows 10 and 11. If this computer had the older StrataField, your borewells are brought over automatically the first time it opens; the old file is not changed.
Already have StrataField? It offers this update by itself: choose Install and restart when asked, or go to Settings & backup → About → Check for updates. (Copies from version 1.0.0 need this installer once; after that, updates are automatic.) Your data is kept.
Uninstalling removes the app but keeps your data in %APPDATA%\Strata.
More help: INSTALL.md · Security: SECURITY.md
The .sig file and latest.json are used by the app's automatic updates; you don't need to download them.
StrataField v1.0.13
What's new in 1.0.13
Fixed
- New borewell opened as a blank white screen when an unfinished borewell had been left in the
form by an older version, from before the pump boxes were added. The unfinished borewell now
opens as it was, with the newer boxes empty. - A screen that fails no longer blanks the window. It says so, offers to try again and to open
the error log, and the menu keeps working.
Installing StrataField
- Download StrataField_…_x64-setup.exe below (under Assets).
- Double-click it.
- If Windows shows "Windows protected your PC", choose More info, then Run anyway. Windows shows this for new programs that are not yet signed.
- Follow the installer. No administrator password is needed; StrataField is installed just for you.
- Open StrataField from the Start menu. Getting started with StrataField, a short guide you can print, is there too.
Works on Windows 10 and 11. If this computer had the older StrataField, your borewells are brought over automatically the first time it opens; the old file is not changed.
Already have StrataField? It offers this update by itself: choose Install and restart when asked, or go to Settings & backup → About → Check for updates. (Copies from version 1.0.0 need this installer once; after that, updates are automatic.) Your data is kept.
Uninstalling removes the app but keeps your data in %APPDATA%\Strata.
More help: INSTALL.md · Security: SECURITY.md
The .sig file and latest.json are used by the app's automatic updates; you don't need to download them.
StrataField v1.0.12
What's new in 1.0.12
New
- Check many files at once on Import. Every chosen file is a row in one table, where you can
type its borewell ID, owner, zone and location without opening it. A zone for every file
fills the zone in for all of them. Click a file's name to see its depths, pump and drawing below. - Two logs on one sheet. A sheet with a second log under the first now gives two rows, one per
borewell. A second log that is the first one drawn again (the same layers, or no site of its own)
is listed but left unticked. - Notes beside a soil. "Good", "Moderate" and the like, written next to a soil on a log, are kept
as that layer's note. - Add locations one after another. A new screen goes through every borewell without a location:
the map opens with its address (or site name) already searched, you click the spot, and the next
one comes up. Reach it from "without a location" on Home or Add their locations after
importing.
Installing StrataField
- Download StrataField_…_x64-setup.exe below (under Assets).
- Double-click it.
- If Windows shows "Windows protected your PC", choose More info, then Run anyway. Windows shows this for new programs that are not yet signed.
- Follow the installer. No administrator password is needed; StrataField is installed just for you.
- Open StrataField from the Start menu. Getting started with StrataField, a short guide you can print, is there too.
Works on Windows 10 and 11. If this computer had the older StrataField, your borewells are brought over automatically the first time it opens; the old file is not changed.
Already have StrataField? It offers this update by itself: choose Install and restart when asked, or go to Settings & backup → About → Check for updates. (Copies from version 1.0.0 need this installer once; after that, updates are automatic.) Your data is kept.
Uninstalling removes the app but keeps your data in %APPDATA%\Strata.
More help: INSTALL.md · Security: SECURITY.md
The .sig file and latest.json are used by the app's automatic updates; you don't need to download them.
StrataField v1.0.11
What's new in 1.0.11
Changed
- The PDF report of a borewell reads better on paper.
- The drawing's column is headed STRATA, each layer's name is written on the layer, and the
depth marks are where the layers change (0, 10, 60, 110...) instead of every 50 ft. A layer too
thin to write on has its name and depths beside it. - A small street map shows where the borewell is, when it has a location and there is internet.
Reports of more than 20 borewells at once leave the maps out. - Pipe pieces is now the number of 10 ft lengths: the tubewell's depth divided by 10, rounded up.
- The top of each page and the footer give the date the borewell was drilled, not the date the
report was made. - The details take less room, two to a row, and long names run onto a second line instead of
being cut off. - The DWO letterhead. Each report carries the Drinking Water Organisation logo, address,
phone numbers and GSTIN across the top and "Sustaining Life Through Water." at the foot, as on
the printed letterhead. Change the wording, or switch the logo off, under
Settings & backup → Report letterhead. - Nearby borewells. A report of up to 20 borewells lists the closest ones within 1 km, with
how far away they are, their depth and their water level. - Lines to sign, for the client and the driller, at the end.
- When no layer has notes, the layers and the pipes sit side by side, which keeps most reports
on one sheet.
- The drawing's column is headed STRATA, each layer's name is written on the layer, and the
- The pump is drawn on the borewell. A marker in the pipe at the depth the pump was lowered to,
on the borewell's page and in the report. - Save as picture draws the borewell the same way.
- "Date drilled" is now "Tubewell lowering date" everywhere: the form, the borewell's page,
the lists, Import, the PDF report and the Excel export. It is the same date as before under a
new name; nothing you entered changes.
Installing StrataField
- Download StrataField_…_x64-setup.exe below (under Assets).
- Double-click it.
- If Windows shows "Windows protected your PC", choose More info, then Run anyway. Windows shows this for new programs that are not yet signed.
- Follow the installer. No administrator password is needed; StrataField is installed just for you.
- Open StrataField from the Start menu. Getting started with StrataField, a short guide you can print, is there too.
Works on Windows 10 and 11. If this computer had the older StrataField, your borewells are brought over automatically the first time it opens; the old file is not changed.
Already have StrataField? It offers this update by itself: choose Install and restart when asked, or go to Settings & backup → About → Check for updates. (Copies from version 1.0.0 need this installer once; after that, updates are automatic.) Your data is kept.
Uninstalling removes the app but keeps your data in %APPDATA%\Strata.
More help: INSTALL.md · Security: SECURITY.md
The .sig file and latest.json are used by the app's automatic updates; you don't need to download them.
StrataField v1.0.10
What's new in 1.0.10
Changed
- Pump company and model are chosen from lists. The pump now has a Pump company box and a
Pump model box, both dropdowns. The model list shows the models you have already used from
the chosen company. Each list, and the pump type's, ends with Add a new… for anything not on
it yet; once saved it is on the list. Pumps already recorded as "KSB 12C/17" in one box are split
into company and model when the borewell is opened for editing, and Import splits them as it
reads a log. The Excel export has a Pump company column.
Installing StrataField
- Download StrataField_…_x64-setup.exe below (under Assets).
- Double-click it.
- If Windows shows "Windows protected your PC", choose More info, then Run anyway. Windows shows this for new programs that are not yet signed.
- Follow the installer. No administrator password is needed; StrataField is installed just for you.
- Open StrataField from the Start menu. Getting started with StrataField, a short guide you can print, is there too.
Works on Windows 10 and 11. If this computer had the older StrataField, your borewells are brought over automatically the first time it opens; the old file is not changed.
Already have StrataField? It offers this update by itself: choose Install and restart when asked, or go to Settings & backup → About → Check for updates. (Copies from version 1.0.0 need this installer once; after that, updates are automatic.) Your data is kept.
Uninstalling removes the app but keeps your data in %APPDATA%\Strata.
More help: INSTALL.md · Security: SECURITY.md
The .sig file and latest.json are used by the app's automatic updates; you don't need to download them.
StrataField v1.0.9
What's new in 1.0.9
New
-
Pump details. A borewell now records its pump: the type, the make and model, the power in HP
and how deep it was lowered. Fill them in on the Drilling & water step; the fields suggest the
usual types, makes and powers, and models you have typed before. They show on the borewell's page
and in its PDF report and Excel export. A pump lowered above the water level, or deeper than the
borewell, is pointed out. -
Import reads the pump. The "Pump Lowering = 250 ft" and "Pump = KSB 12C/17 , 5 HP" lines on a
drilling log are read into the lowering, the power and the model, shown for checking before you
import. -
Add the location while importing. The Import screen has a Location box for each file:
paste the coordinates or use Pick on the map, which opens with the file's address searched.
It is optional; a borewell imported without one can still be given a location later. -
Zone while importing. The Import screen also has a Zone box for each file.
Changed
- Import waits for you to check guessed columns. A file laid out differently is no longer
imported until you have looked at the columns StrataField guessed and clicked These columns
are right, import this file. The column choices now show each column's heading and say what
they mean in plainer words. - After importing, a link leads straight to the borewells that still need a location, and the
Import button is gone when no file on the list can be imported. - New borewell is easier to get right. Every step can be opened at any time. Each problem on
the Check step says which box it is about ("Hole size: type a number here.") and takes you there
when clicked. Notes such as "The owner's name is empty" no longer appear before you have typed
anything. The Zone box explains what a zone is and says when it was carried over from the last
borewell. The Location step has three ways to choose from instead of four. - Tidier screens. Section headings and the lines under them now sit level across a screen,
every screen starts at the same left edge and no longer shifts when a scrollbar appears, the
Borewells list keeps each row to one height, and the borewell card on the Map no longer covers the
map's buttons. - Water colours stay within 500 m of a borewell. The Map used to colour up to about 3 km around
each borewell. An estimate that far away says little, so colours now reach 500 m and are drawn
finer. Zoom in to see them.
Installing StrataField
- Download StrataField_…_x64-setup.exe below (under Assets).
- Double-click it.
- If Windows shows "Windows protected your PC", choose More info, then Run anyway. Windows shows this for new programs that are not yet signed.
- Follow the installer. No administrator password is needed; StrataField is installed just for you.
- Open StrataField from the Start menu. Getting started with StrataField, a short guide you can print, is there too.
Works on Windows 10 and 11. If this computer had the older StrataField, your borewells are brought over automatically the first time it opens; the old file is not changed.
Already have StrataField? It offers this update by itself: choose Install and restart when asked, or go to Settings & backup → About → Check for updates. (Copies from version 1.0.0 need this installer once; after that, updates are automatic.) Your data is kept.
Uninstalling removes the app but keeps your data in %APPDATA%\Strata.
More help: INSTALL.md · Security: SECURITY.md
The .sig file and latest.json are used by the app's automatic updates; you don't need to download them.
StrataField v1.0.8
What's new in 1.0.8
New
- Search for a place when picking a location. The map you pick a borewell's position on now has
a search box, like the one in Google Maps: type a place, colony or road, choose from the matches
as they appear, and the map goes there. Then click the exact spot. Places in and around Lucknow
are listed first. Needs internet.
Changed
- "Look up the address" is now "Search for the address". It opens the same map with the address
from the form already searched, so you can see the matches and where they are before using one,
instead of taking the first match unseen.
Installing StrataField
- Download StrataField_…_x64-setup.exe below (under Assets).
- Double-click it.
- If Windows shows "Windows protected your PC", choose More info, then Run anyway. Windows shows this for new programs that are not yet signed.
- Follow the installer. No administrator password is needed; StrataField is installed just for you.
- Open StrataField from the Start menu. Getting started with StrataField, a short guide you can print, is there too.
Works on Windows 10 and 11. If this computer had the older StrataField, your borewells are brought over automatically the first time it opens; the old file is not changed.
Already have StrataField? It offers this update by itself: choose Install and restart when asked, or go to Settings & backup → About → Check for updates. (Copies from version 1.0.0 need this installer once; after that, updates are automatic.) Your data is kept.
Uninstalling removes the app but keeps your data in %APPDATA%\Strata.
More help: INSTALL.md · Security: SECURITY.md
The .sig file and latest.json are used by the app's automatic updates; you don't need to download them.
StrataField v1.0.7
What's new in 1.0.7
New
- Find what still needs filling in after importing. A borewell with no owner, water level or
drilling date now says so in the Borewells list, a Missing details button lists just those,
and Home's "Needs attention" counts them. - Import notes are kept. What the Import screen said about a file (no water level, converted
from metres, a second log on the sheet...) is saved in that borewell's History. - Activity. A new screen lists every change across all borewells, newest first, with a search box.
- Open the error log. Settings & backup → About has a button that opens the log of problems kept
on this computer. - A user manual with pictures. A PDF that walks through every screen is installed with
StrataField. Open it from User manual at the bottom of the menu, from Settings & backup →
About, or from the Start menu.
Changed
- A new logo. A block of ground cut open to show its layers, with a borewell core and a location
pin, on the app's icon, in the menu and on the manual's cover. - The status in the Borewells list names everything a record lacks ("No location, owner") instead of
only the first thing. - Settings & backup → About shows the logo and a short description of StrataField.
Installing StrataField
- Download StrataField_…_x64-setup.exe below (under Assets).
- Double-click it.
- If Windows shows "Windows protected your PC", choose More info, then Run anyway. Windows shows this for new programs that are not yet signed.
- Follow the installer. No administrator password is needed; StrataField is installed just for you.
- Open StrataField from the Start menu. Getting started with StrataField, a short guide you can print, is there too.
Works on Windows 10 and 11. If this computer had the older StrataField, your borewells are brought over automatically the first time it opens; the old file is not changed.
Already have StrataField? It offers this update by itself: choose Install and restart when asked, or go to Settings & backup → About → Check for updates. (Copies from version 1.0.0 need this installer once; after that, updates are automatic.) Your data is kept.
Uninstalling removes the app but keeps your data in %APPDATA%\Strata.
More help: INSTALL.md · Security: SECURITY.md
The .sig file and latest.json are used by the app's automatic updates; you don't need to download them.
StrataField v1.0.6
What's new in 1.0.6
Fixed
- Import Excel reads the whole drilling log. The owner, address, city, date, hole size, pipe
size and water level written beside the layers are now filled in (they were being missed). - Thick layers come in as one layer. A log written in 10 ft steps no longer turns "Clay, Clay,
Clay" into three layers; rows of the same soil that touch are joined. Pipes are joined the same way. - Plain pipe is no longer missed. Screens and plain pipe sit in neighbouring columns in the
logs, and only the screens were being read. - Logs drawn to scale are read. Some logs write each soil once inside its layer, with the depth
where it ends beside it ("16 mt"), instead of a row every 10 ft. These used to fail; now they
import, pipes included. - Logs in metres. A unit written beside a depth ("16 mt", "370 ft") now decides feet or metres,
and the total depth and water level are converted to feet along with the layers. - Site, address and city. A site written over four lines (name, address, area, city) no longer
puts the area in City; the last line is the city and the lines between are the address. - Pipes in logs with a row per 3 m pipe. The pipe is now read against its own depths (the
assembly column), so screens between soil changes are no longer lost. - More layouts read. A log with the pipe list on the left and the soil chart on the right, a
sheet that starts with a pipe-only page, a site name written on the same line as "Site:", and
hole and pipe sizes written only under the headings. - Depths converted from metres are rounded to a tenth of a foot.
- An imported borewell's ID starts as the file's name; the site name goes into Owner.
Installing StrataField
- Download StrataField_…_x64-setup.exe below (under Assets).
- Double-click it.
- If Windows shows "Windows protected your PC", choose More info, then Run anyway. Windows shows this for new programs that are not yet signed.
- Follow the installer. No administrator password is needed; StrataField is installed just for you.
- Open StrataField from the Start menu. Getting started with StrataField, a short guide you can print, is there too.
Works on Windows 10 and 11. If this computer had the older StrataField, your borewells are brought over automatically the first time it opens; the old file is not changed.
Already have StrataField? It offers this update by itself: choose Install and restart when asked, or go to Settings & backup → About → Check for updates. (Copies from version 1.0.0 need this installer once; after that, updates are automatic.) Your data is kept.
Uninstalling removes the app but keeps your data in %APPDATA%\Strata.
More help: INSTALL.md · Security: SECURITY.md
The .sig file and latest.json are used by the app's automatic updates; you don't need to download them.