Skip to content

SimplrSSH v1.4.14

Choose a tag to compare

@github-actions github-actions released this 12 Oct 23:02
3d20984

SimplrSSH v1.4.14

The changes in this release are listed under What's Changed below.

Install

Download SimplrSSH-v1.4.14-release.bin below and flash it to the LilyGO T-Deck / T-Deck Plus at offset 0x0
(ESP32-S3, DIO, 80 MHz, 16 MB):

  • Browser: open https://espressif.github.io/esptool-js/, connect the T-Deck over USB,
    add SimplrSSH-v1.4.14-release.bin at address 0x0, and click Program.
  • Command line:
    esptool.py --chip esp32s3 --baud 921600 write_flash 0x0 SimplrSSH-v1.4.14-release.bin
    

SHA-256: 7db65e73f932a38efd9e5fc73cce28b1319fe49f53ae09d9347176294408eb4a (also in SimplrSSH-v1.4.14-release.bin.sha256; check with sha256sum -c SimplrSSH-v1.4.14-release.bin.sha256)

With a launcher (bmorcelli/Launcher)

If the T-Deck runs a launcher, copy SimplrSSH-v1.4.14-launcher.bin to its SD card and install it from
the launcher's SD menu (or its web UI). The launcher puts the app in a free slot and creates
SimplrSSH's own simplrssh settings partition, which is kept when you install a newer version
the same way. Without a launcher, use SimplrSSH-v1.4.14-release.bin above.

SHA-256: 0247d09e768ccaa37c5670f400e398c7241dbaeffbe19a83b4141781eaea26e4 (also in SimplrSSH-v1.4.14-launcher.bin.sha256)

M5Stack Tab5 (with the Tab5 Keyboard)

Download SimplrSSH-Tab5-v1.4.14-release.bin and flash it to the Tab5 at offset 0x0 (ESP32-P4, 16 MB). To
enter download mode, hold the Tab5's reset button for about 2 seconds, until the green LED
flashes quickly.

  • Browser: open https://espressif.github.io/esptool-js/, connect the Tab5 over USB-C,
    add SimplrSSH-Tab5-v1.4.14-release.bin at address 0x0, and click Program.
  • Command line:
    esptool.py --chip esp32p4 --baud 921600 write_flash 0x0 SimplrSSH-Tab5-v1.4.14-release.bin
    

SHA-256: 4a89bd4eaf17441d828a5165c180d2cc1b07dadbfea574dcf111608888907936 (also in SimplrSSH-Tab5-v1.4.14-release.bin.sha256)

With a launcher, install SimplrSSH-Tab5-v1.4.14-launcher.bin from the SD card instead.
SHA-256: 026ffe785d3871056d8f4a0a2b7bd257141f3a6a494c09e6ef1323aae2d330db (also in SimplrSSH-Tab5-v1.4.14-launcher.bin.sha256)

Tab5 support is new and has not been tested on a Tab5 yet: please report what you find.

What's Changed

  • ci: add MicroHealth's shared Opengrep SAST workflow by @bluenevus in #18

Full Changelog: v1.4.13...v1.4.14