Skip to content

SimplrSSH v1.4.9

Choose a tag to compare

@github-actions github-actions released this 06 Oct 02:16
210d089

SimplrSSH v1.4.9

The changes in this release are listed under What's Changed below.

Install

Download SimplrSSH-v1.4.9-release.bin below and flash it to the LilyGO T-Deck / T-Deck Plus at offset 0x0
(ESP32-S3, DIO, 80 MHz, 16 MB):

  • Browser: open https://espressif.github.io/esptool-js/, connect the T-Deck over USB,
    add SimplrSSH-v1.4.9-release.bin at address 0x0, and click Program.
  • Command line:
    esptool.py --chip esp32s3 --baud 921600 write_flash 0x0 SimplrSSH-v1.4.9-release.bin
    

SHA-256: f6a18fb916d5f537eecfce1786064b1b03257ca27fb10e8a70b5951c8703e622 (also in SimplrSSH-v1.4.9-release.bin.sha256; check with sha256sum -c SimplrSSH-v1.4.9-release.bin.sha256)

With a launcher (bmorcelli/Launcher)

If the T-Deck runs a launcher, copy SimplrSSH-v1.4.9-launcher.bin to its SD card and install it from
the launcher's SD menu (or its web UI). The launcher puts the app in a free slot and creates
SimplrSSH's own simplrssh settings partition, which is kept when you install a newer version
the same way. Without a launcher, use SimplrSSH-v1.4.9-release.bin above.

SHA-256: 8485b48c73880a3cb64ac62a960d3833f443b4edb5a314fcadfd419325905b7a (also in SimplrSSH-v1.4.9-launcher.bin.sha256)

M5Stack Tab5 (with the Tab5 Keyboard)

Download SimplrSSH-Tab5-v1.4.9-release.bin and flash it to the Tab5 at offset 0x0 (ESP32-P4, 16 MB). To
enter download mode, hold the Tab5's reset button for about 2 seconds, until the green LED
flashes quickly.

  • Browser: open https://espressif.github.io/esptool-js/, connect the Tab5 over USB-C,
    add SimplrSSH-Tab5-v1.4.9-release.bin at address 0x0, and click Program.
  • Command line:
    esptool.py --chip esp32p4 --baud 921600 write_flash 0x0 SimplrSSH-Tab5-v1.4.9-release.bin
    

SHA-256: a58945089e6c5a4f8843bd318f5270fe04cf7b1c709dbe682ad923905af34cb1 (also in SimplrSSH-Tab5-v1.4.9-release.bin.sha256)

With a launcher, install SimplrSSH-Tab5-v1.4.9-launcher.bin from the SD card instead.
SHA-256: 652202cb1ba69fb301eeb09a54c4c066bfbb73f4ed60b1deef669dd44d35e4e9 (also in SimplrSSH-Tab5-v1.4.9-launcher.bin.sha256)

Tab5 support is new and has not been tested on a Tab5 yet: please report what you find.

What's Changed

  • Tab5: fix black screen at boot, power the keyboard and WiFi; hold Ctr… by @bluenevus in #13

Full Changelog: v1.4.8...v1.4.9