Skip to content

Mewcoder v0.1: SLOOP 2.8.4 with a vocoder and two USB audio inputs, for the SMK-37 Elite

Latest

Choose a tag to compare

@MiloMeowzers MiloMeowzers released this 11 Nov 09:54
· 12 commits to ci since this release

Mewcoder: SLOOP 2.8.4 with a 20-channel vocoder and two USB audio inputs, for the M-Vave SMK-37 Elite. Unofficial firmware, not affiliated with or endorsed by M-Vave. No warranty.

Back up the keyboard's whole flash first: its calibration, Bluetooth pairing and key_mac are its own and no package contains them (how). Back up your projects and settings with the editor's full backup as well. Going back: the Multichannel USB audio build (v2.8.1-smk37.1) or M-Vave's own updater (M-UPGRADE).

Install from the browser: Mewcoder's page (Chrome or Edge, over USB).

What it is

Track 3 becomes an audio track: audio from the computer plays as it is (AUDIO) or through a 20-channel vocoder modelled on the Sennheiser VSM201 (VOCODER), played from the keys and the sequencer.

  • Two USB audio inputs, each routed (HOME > SETUP > IN L, IN R): TRACK 3 (your voice into the vocoder), CARRIER (your own synth as the carrier, gated by track 3's notes), T1 / T2 (an instrument through that track's effects and slicer), OFF.
  • SETUP: FULL, VOC + DRUMS, VOC + SYNTH, VOC ALONE. With any of SLOOP's tracks off, the vocoder runs at 44.1 kHz.
  • The carrier: the built-in saws (AUTO, 1 SAW, 2 SAWS) or an external synth (EXT L / EXT R, with GATE DELAY).
  • HOME > INPUT: TRIM L / TRIM R (−18 .. +6 dB) with a level meter each; aim your voice's peaks at the −10 tick.
  • Shaping: ENVELOPE (ATTACK, RELEASE, BRIDGE MODE), voiced / unvoiced detection with a noise source, the speech addition (HF), silence bridging and BRIDGE TONE, AUTOCONTROL, the carrier's AGC, RESPONSE (FLAT, NORMAL, EMPHASIS).
  • ENVELOPE > BRIDGE MODE: FOLLOW keeps the bridged pauses below your words and picks each word up smoothly. Try it if words have a rough, choppy edge with BRIDGE turned up. FIXED (the default) is the bridging as before.
  • AUTOCONTROL reworked: it steadies your voice's level slowly, never boosts the gaps between words, and ignores breath and plosives.
  • HF and DRY in 3 dB steps down to −30 dB.
  • GLO's MIDI pages in plain words: T1 CH .. DRM CH; MIDI IN/OUT (IN: ALL / CLOCK, SPARE, OUT: KEYS / +SEQ); MIDI 3.
  • The vocoder page (PATCH on the tracks screen): the 20 channels on the knobs and pads.
  • The web editor's Vocoder tab: every setting and the 20 channels; kept with each project slot and in the full backup.
  • The build on the splash and ABOUT (82aeaad VOC).

The manual: VOCODER.md.

What it leaves out (to make room)

No built-in samples (your own sample slots work), no TEXTURE, DIGITAL, LOFI, VOICE, TRIO or NOISE engines, and the delay runs at 22 kHz. It is also a console build: the keyboard shows up as a serial port as well. If you need those, use the Multichannel USB audio build.

Files

File For
sloop-smk37-elite-vocoder.fwsc SMK-37 Elite only
sloop-editor-2.8.4-smk37-82aeaad.html the web editor for this build, as one file, offline (Chrome / Edge)
SHA256SUMS their SHA-256

Or install with Python, from the mewcoder branch: python3 tools/fm1_install.py sloop-smk37-elite-vocoder.fwsc (needs pip install mido python-rtmidi). The installer checks the package against the keyboard's model before it writes anything. Use the editor that comes with this build.

Tested on an SMK-37 Elite. Your settings from an earlier Mewcoder build carry over.

Built on SLOOP 2.8.4 by isod89, Felucca by Leo Kuroshita / Hügelton Instruments, and the SMK-37 board layer by M. Geisler (genkigenki). GPL-3.0-only.