SSH-it 1.0.33

SSH-it 1.0.33

A native Windows SSH workspace that drives the OpenSSH client you already have.

SSH-it runs ssh.exe under a ConPTY, so agent keys, FIDO tokens, ProxyJump chains and every line of your ssh_config behave exactly as they do in a terminal — because it is the same client. On top of that it adds the things a terminal does not give you: command blocks, a signed evidence chain, an SFTP panel with mirror and resume, tunnels, workspaces, a tmux control-mode window, and a CLI/MCP surface agents can drive.

What's new in 1.0.33

• Network scan. Session ▸ Network scan takes a CIDR block, a last-octet range or a single address and TCP-connects one port (22 by default) across up to 4,096 addresses. Every host that answers shows its banner, and SSH hosts can have their offered host key read with ssh-keyscan so the fingerprint is there before the first connection. Selected results become sessions in one click; a host and port already saved is skipped, and nothing is written until you add it. It is not a port scanner: one port, no ping, no ICMP. The same sweep is available headlessly as --scan.
• Focus mode. Ctrl+Shift+Z hides the sidebar, the tool panel and the status bar together, and the same chord brings them back exactly as they were. It is a view, not a setting: the layout saved at exit is the one you chose outside focus mode.
• Readable fields. A five-digit port and a four-digit timeout fit their boxes instead of being clipped, and the fingerprint column ellipsises with the full hash in its tooltip. This is the only difference from 1.0.32.
• Licence and release hygiene. The source carries an MIT LICENSE file, the winget manifest carries a real installer hash, and a diagnostic probe command containing spaces is quoted once rather than twice.

Install

Download SSH-it-Setup-1.0.33.exe and run it. Per-user, no admin prompt, no runtime to install.

• Size: 49,559,973 bytes
• SHA-256: cd9b8fa5624aba32dc6e64ef30518f116e6c8f27dc9224f6cfbce16d887abfee

Verify before running:

certutil -hashfile SSH-it-Setup-1.0.33.exe SHA256

Requirements

Windows 10 1809 or newer (x64). The installer is self-contained.

Not code-signed

There is no code-signing certificate, so SmartScreen will say "Unknown publisher" on first run until download reputation builds. The SHA-256 above is the check that matters: it is the hash of the file attached to this release.

Licence

MIT.

SSH-it 1.0.32

SSH-it 1.0.32

A native Windows SSH workspace that drives the OpenSSH client you already have.

SSH-it runs ssh.exe under a ConPTY, so agent keys, FIDO tokens, ProxyJump chains and every line of your ssh_config behave exactly as they do in a terminal — because it is the same client. On top of that it adds the things a terminal does not give you: command blocks, a signed evidence chain, an SFTP panel with mirror and resume, tunnels, workspaces, a tmux control-mode window, and a CLI/MCP surface agents can drive.

What's new in 1.0.32

• Network scan. Session ▸ Network scan takes a CIDR block, a last-octet range or a single address and TCP-connects one port (22 by default) across up to 4,096 addresses. Every host that answers shows its banner, and SSH hosts can have their offered host key read with ssh-keyscan so the fingerprint is there before the first connection. Selected results become sessions in one click; a host and port already saved is skipped, and nothing is written until you add it. It is not a port scanner: one port, no ping, no ICMP. The same sweep is available headlessly as --scan.
• Focus mode. Ctrl+Shift+Z hides the sidebar, the tool panel and the status bar together, and the same chord brings them back exactly as they were. It is a view, not a setting: the layout saved at exit is the one you chose outside focus mode.
• Licence and release hygiene. The source now carries an MIT LICENSE file, so the repository is no longer all-rights-reserved by default. The winget manifest carries a real installer hash instead of a placeholder, and a diagnostic probe command containing spaces is quoted once rather than twice.

Install

Download SSH-it-Setup-1.0.32.exe and run it. Per-user, no admin prompt, no runtime to install.

• Size: 49,554,539 bytes
• SHA-256: 81d2d56e23fd3a09673253dc718a507655bf59af524d96a607c5b03959cd4945

Verify before running:

certutil -hashfile SSH-it-Setup-1.0.32.exe SHA256

Requirements

Windows 10 1809 or newer (x64). The installer is self-contained.

Not code-signed

There is no code-signing certificate, so SmartScreen will say "Unknown publisher" on first run until download reputation builds. The SHA-256 above is the check that matters: it is the hash of the file attached to this release.

Licence

MIT.

SSH-it 1.0.31

SSH-it 1.0.31

A native Windows SSH workspace that drives the OpenSSH client you already have.

SSH-it runs ssh.exe under a ConPTY, so agent keys, FIDO tokens, ProxyJump chains and every line of your ssh_config behave exactly as they do in a terminal — because it is the same client. On top of that it adds the things a terminal does not give you: command blocks, a signed evidence chain, an SFTP panel with mirror and resume, tunnels, workspaces, a tmux control-mode window, and a CLI/MCP surface agents can drive.

What's new in 1.0.31

• A reconnect you can trust. A dead link is now detected by the keepalive (about two minutes), then retried on a 2 / 5 / 15 / 30 / 60 second ladder with a countdown in the pane. Two bugs made the old build lie: a 900 ms "the process is alive, call it connected" timer, and ConPTY's own startup prologue being counted as output from the far end. Both are fixed, and three regression checks pin the rule. Measured on a black-holed link: zero false "connected" across three retry cycles.
• Jump chains that carry a key. OpenSSH's -J never passes -i or -o to the hop, so a session with a key file and a bastion failed with Permission denied (publickey) at the hop. A keyed chain is now spelled as nested ProxyCommands, and each hop can have its own key with hop=key.
• tmux control mode. Attach with tmux -C and every tmux pane becomes a real pane in the window, laid out the way tmux laid it out; splits on the far end redraw the window. tmux 3.0 or newer, checked by asking tmux -V and refused by name and version if it is older.
• Agent forwarding through a hop, and MFA answered in the pane.
• --ledger --since refuses a bad date instead of silently printing the whole ledger (the same rule
  --audit-export already had).

Install

Download SSH-it-Setup-1.0.31.exe and run it. Per-user, no admin prompt, no runtime to install.

• Size: 49,543,305 bytes
• SHA-256: cdc6424f30975a7046385a42fb19f3171cee329daba5d81a0ca52ff4ddaf2c84

Verify before running:

certutil -hashfile SSH-it-Setup-1.0.31.exe SHA256

Requirements

Windows 10 1809 or newer (x64). The installer is self-contained.

Not code-signed

There is no code-signing certificate, so SmartScreen will say "Unknown publisher" on first run until download reputation builds. The SHA-256 above is the check that matters: it is the hash of the file attached to this release.

Licence

MIT.