Skip to content

OwnAudioSharp v4.0.12

Latest

Choose a tag to compare

@ModernMube ModernMube released this 08 Nov 19:42

Graphic EQs that do what the faders say, and instrument presets

4.0.12 reworks the three graphic EQs: EqualizerEffect (10 bands), Equalizer30BandEffect (30 bands) and the graphic EQ inside the Smart Master. A band value now means the level of the curve at that band's centre. The built-in presets have been retuned to match, and seven new presets cover single instruments and vocals.

Graphic EQ: a band value is the curve

  • Neighbouring bells overlap, so a row of faders used to sum to more than its values. With every fader at +6 dB the 30-band EQ came out 1.3–1.6× as strong as set. The 1/3-octave bells also left a ripple of 2 dB or more between the band centres.
  • Equalizer30BandEffect now uses 0.57-octave bells (DefaultBandQ = 2.5). The filter gains are solved against the overlap with a ridge-regularised solver, which keeps a zigzag of faders from turning into huge filter gains. The response passes through the fader values within ~0.3 dB, between the centres as well as on them.
  • EqualizerEffect keeps its two Q=1 biquads per band and uses the same solver. The Smart Master's graphic EQ uses the same bells (SmartMasterConfig.GraphicBandQ).
  • The native 10-band EQ now clamps its filter gains at ±18 dB instead of ±12. The faders still stop at ±12 dB, but a single fader at +12 dB needs a filter gain of about +14 dB.

Behaviour change: a saved band value now means the curve, not a raw bell. Settings saved with 4.0.11 sound milder where neighbouring bands were pushed the same way. To convert them, sum the old bells at each centre with GraphicEq.BellDb.

Presets

The built-in presets have been rewritten as plain curves, with boosts of +6 dB at most:

  • Bass is a clean low shelf and no longer lifts the top end.
  • Voice is now a curve for speech and podcasts: the rumble is cut, 2–4 kHz is raised and the top end is softened.
  • Rock, Pop, Jazz, Electronic and Acoustic have clearer shapes.

New in both EqualizerPreset and Equalizer30Preset, as starting points for a single track:

Preset Curve
MaleVocal low cut below 80 Hz, chest at 125–200 Hz, 400 Hz mud out, presence at 4–5 kHz, air
FemaleVocal low cut below ~125 Hz, body at 250 Hz, 500 Hz out, presence at 5 kHz, 8 kHz sibilance held back, 16 kHz air
AcousticGuitar boom (200–250 Hz) and box (800 Hz) cut, string detail and sparkle raised
BassGuitar fundamental at 63–80 Hz, mud cut, growl at 1 kHz, attack at 2.5 kHz, string noise rolled off
Piano rumble and 250–400 Hz mud cut, hammer definition and air
Drums for a drum bus: kick at 63 Hz, box cut at 400–500 Hz, snare crack at 2.5–4 kHz, cymbals at 10–12.5 kHz
Brass low cut, warmth at 200–250 Hz, honk cut, bite at 3 kHz, shrill 8 kHz tamed

The new members come after the existing ones, so enum values that you have already saved keep their meaning.

Added API

  • GraphicEq.BellDb: the exact magnitude of an RBJ peaking filter, in dB.
  • Equalizer30BandEffect.GetFilterGain / GetBandQ / DefaultBandQ, EqualizerEffect.GetFilterGain / BandQ, SmartMasterEffect.GetGraphicFilterGains, SmartMasterConfig.GraphicBandQ. To draw an EQ's response, use these filter gains rather than the band values.

Notes

  • New DSP tests measure every preset at its band centres on the native engine and check that even faders give an even curve.
  • Documentation: modernmube.github.io/OwnAudioSharp

Full Changelog: V4.0.11...V4.0.12

Packages (NuGet)

Package Version
OwnAudioSharp 4.0.12
OwnAudioSharp.Basic 4.0.12
OwnAudioSharp.Mobile 4.0.12
OwnAudioSharp.Midi 4.0.12
OwnAudioSharp.Mt3 4.0.12