Repository navigation
What's new
- Pair up to six Zigbee devices, including sockets, power strips, and one ambient temperature/humidity sensor.
- Manage devices in a compact Zigbee panel, with individual removal and output assignments across different devices.
- View Chamber and Ambient measurements separately and compare their history on the charts. The Chamber sensor continues to control automation; Ambient is for monitoring.
- More reliable paired-device information and clearer handling of missing or outdated readings.
Choose the right update
This release introduces a new device configuration. Both controllers must use compatible firmware.
First upgrade from v1.666.EN or earlier: use the full USB images for both controllers. This requires a fresh configuration and pairing the Zigbee devices again. Record your Wi-Fi, account, cycle, and output-assignment settings before starting, turn all outputs off, and use the USB setup/recovery procedure for your compatible MycoBox. Old device configurations are not migrated.
| File | Use |
|---|---|
MycoBox-S3-Recovery-v1.669.EN.bin |
Full Main Controller image for USB setup/recovery; clears settings. |
MycoBox-H2-Recovery-v1.669.EN.bin |
Full Zigbee Controller image for USB setup/recovery; clears Zigbee pairing. |
MycoBox-S3-OTA-v1.669.EN.bin |
Main Controller update through the firmware panel. |
MycoBox-H2-OTA-v1.669.EN.bin |
Zigbee Controller update through Update Zigbee Controller. |
Devices already running compatible six-device firmware: OTA updates preserve settings, pairing, and output assignments. Update the Main Controller first and wait for it to restart, then update the Zigbee Controller. Keep MycoBox and the paired devices powered until verification finishes, and check the assignments and output control afterward. The H2 OTA package is intended for the web panel; use the full image for USB recovery.
All four firmware files are encrypted and intended for compatible MycoBox hardware. Do not disconnect power during programming.
File integrity
Compare the SHA-256 hash of each downloaded firmware file with SHA256SUMS.txt before updating.