Repository navigation
Releases
Bulletproof Retarget v1.3.5
Bulletproof Retarget v1.3.5 (Blender 5.0+)
Quick Install
- Download
bulletproof_retarget-1.3.5.zipbelow under Assets. - Drag and drop the .zip into your Blender 5.0+ window and click OK. It installs over 1.3.x.
- Open 3D Viewport → Sidebar (N) → BP Retarget.
What's New in v1.3.5
- The copy warning is right when a copy no longer follows the rig. A copy of a Rig Bridge character keeps its link to the original's control rig. If the copy's Rig Bridge constraints were removed, retargeting onto it works and the keys show, but the report said they don't. Now it only says that nothing was baked onto the other character's rig. A Shift+D copy that still follows the rig gets the 1.3.4 warning unchanged, and nothing is baked onto the original's rig.
Goes with Rig Bridge 1.2.0 and MoCap Cleanup Studio 1.2.0.
Tested
Standards test 14/14 and FBX bone axes test 3/3 on Blender 5.3. The copy cases and the chain (retarget with Bake to Control Rig, then cleanup) were rerun; the installed zip bakes a cut-out of the fight take onto a Rig Bridge control rig.
Bulletproof Retarget v1.3.4
Bulletproof Retarget v1.3.4 (Blender 5.0+)
Quick Install
- Download
bulletproof_retarget-1.3.4.zipbelow under Assets. - Drag and drop the .zip into your Blender 5.0+ window and click OK. It installs over 1.3.x.
- Open 3D Viewport → Sidebar (N) → BP Retarget.
What's New in v1.3.4
Found in a full test: a 5755-frame OptiTrack fight take retargeted onto a Mixamo and a UE5 / Character Creator character through their Rig Bridge control rigs, then cleaned with MoCap Cleanup Studio.
- A Shift+D copy of a Rig Bridge character is never baked onto the original's control rig. A copied skeleton keeps the original's rig link, and retargeting onto the copy replaced the original character's take. Now nothing is baked, and the report tells you to compile the copy in Rig Bridge. Picking a control rig as Source or Target always resolves to the skeleton it was compiled for, not to a copy.
- Batch skips hidden helper actions (names starting with "."), such as MoCap Cleanup Studio's raw snapshots, which were listed and ticked.
- Ignore NLA says what it ignored. With Ignore NLA on, the report names the source's NLA tracks that were left out (for example a residual detail layer).
- README: with two animated rigs, Use Selected makes the active object the target; Floor Contact keeps the foot and toe joints, not the shoe mesh, above the floor.
v1.3.3's support for picking Rig Bridge control rigs directly as Source and Target is included. With Rig Bridge 1.1.0, Retarget Animation with Bake to Control Rig on a 3-minute take takes 4–6 minutes instead of 30–50.
Bulletproof Retarget v1.3.2
Bulletproof Retarget v1.3.2 (Blender 5.0+)
Quick Install
- Download
bulletproof_retarget-1.3.2.zipbelow under Assets. - Drag and drop the .zip into your Blender 5.0+ window and click OK. It installs over 1.3.x.
- Open 3D Viewport → Sidebar (N) → BP Retarget.
What's New in v1.3.2
Found in a full test: a P2M source retargeted onto 5 imported FBX characters (Mixamo ×2, AccuRIG, Character Creator, UE5), each with a Rig Bridge control rig.
- You can pick the control rig itself as Target. In the Target field or with Use Selected, BPR now switches to the skeleton that rig drives, then bakes the result back onto the rig. Before, it tried to map onto the rig's control bones: the CC head ended up 9 cm / 54° off, and UE5 was refused with "not its standard spine".
- Result: 3 clicks per character (Import, Compile, Retarget). All 5 characters are within 0.1 cm of a plain retarget, with 0.000° rotation error, driven by the control rig alone.
v1.3.1's fixes (toe and fingertip flips on FBX skeletons, one-click Bake to Control Rig) are included.
Bulletproof Retarget v1.3.1
Bulletproof Retarget v1.3.1 (Blender 5.0+): BugFixing based on multiple new Test Rigs
One-click humanoid animation retargeting between P2M, Mixamo, Rigify, Unreal Engine (UE4 / UE5 / UEFN), OptiTrack, Auto-Rig Pro, Daz Genesis 8 & 9, VRoid / VRM, Character Creator / ActorCore, HumanIK / MotionBuilder, 3ds Max Biped, CMU BVH, MMD, and VRChat / Cats.
Quick Install
- Download
bulletproof_retarget-1.3.1.zipbelow under Assets. - Drag and drop the .zip file directly into your Blender 5.0+ window and click OK. It installs over 1.3.0.
- Open 3D Viewport → Sidebar (N) → BP Retarget.
What's New in v1.3.1
Tested on three real Character Creator exports (UE, AccuRIG and CC_Base names) and on 95 source/target pairs from a 20-standard skeleton set.
-
Toes and fingertips no longer flip on FBX skeletons.
- The bug: a joint with no end bone on both rigs (toes and fingertips of UE/CC/Daz exports) was lined up by its bone axis. FBX imports leave that axis pointing sideways or straight up.
- The fix: BPR now uses the chain from the previous joint (foot → toe, finger 2 → finger 3), which means the same thing on every skeleton.
Skeleton Before After UE-named CC export, right toe 177° 0° UE-named CC export, fingertips 60–112° 0° AccuRIG / CC_Base, fingertips 7–15° 0° Sideways-axis test rigs, toes and fingertips 86–142° 0° Skeletons that already have end bones (Mixamo, P2M, Rigify) behave as before.
-
One-click Bake to Control Rig for Rig Bridge rigs.
- When the target skeleton is driven by a Rig Bridge control rig, the panel shows Bake to Control Rig, which is on by default.
- Retarget Animation then also runs Rig Bridge's Bake to Control Rig, so the animation lands on the rig's FK/IK controls.
- Rig Bridge is a separate add-on and is not required.
-
Earlier takes are kept. With Overwrite Existing off, new results are named
<name>_2,<name>_3instead of.001. -
For scripts:
scene.bp_retarget.last_actionandlast_framesreport the result of the last run. -
New test:
tests/test_fbx_bone_axes.pyneeds no extra files. It fails on 1.3.0 and passes on 1.3.1.
Bulletproof Retarget v1.3.0
Bulletproof Retarget v1.3.0 (Blender 5.0+)
One-click humanoid animation retargeting between P2M, Mixamo, Rigify, Unreal Engine (UE4 / UE5 / UEFN), OptiTrack, Auto-Rig Pro, Daz Genesis 8 & 9, VRoid / VRM, Character Creator / ActorCore, HumanIK / MotionBuilder, 3ds Max Biped, CMU BVH, MMD, and VRChat / Cats.
Quick Install
- Download �ulletproof_retarget-1.3.0.zip below under Assets.
- Drag and drop the .zip file directly into your Blender 5.0+ window and click OK.
- Open 3D Viewport → Sidebar (N) → BP Retarget.
What's New in v1.3.0
- IK Retargeting on Control Rigs (FK / IK Legs / Full IK): Bake directly to IK foot/hand effectors (oot_ik, hand_ik), pole targets ( high_ik_target, upper_arm_ik_target), and oe_ik controls on P2M and generated Rigify rigs so feet stay planted and easy to edit on the timeline.
- Floor Contact Clamping (Floor): Optional toggle that prevents target ankles, balls, and toes from sinking below the target character's ground level.
- Auto-Rig Pro (ARP_FK) Support: Automatically sets and keys ik_fk_switch = 1.0 when retargeting onto Auto-Rig Pro FK controls.
- Daz G3/G8 In-Chain Twist Support: Preserves upper-arm and thigh axial roll from in-chain twist bones (lShldrTwist, lThighTwist, lForearmTwist) and avoids double-twisting forearms that already have active twist constraints/drivers.
- Reliability Improvements: Gimbal-safe spine tweak twist evaluation, CRC32 keyframe checksums to protect hand-polished actions, all-caps bone name heuristic tokenization, and Current Poses reference fix in Preview This Frame.