Repository navigation
POPSLoader BETA-12 — Hardware fixes, MX4SIO realignment & game-list features
POPSLoader BETA-12
The culmination of the BETA-9 → BETA-12 line. BETA-12 folds in a full round of hardware-tester fixes, a rewrite of MX4SIO handling to match OPL's passive BDM model, a batch of game-list features, and two independent source-audit hardening passes — on top of everything shipped since BETA-9.
Hardware-validated where noted; the rest boots clean on PCSX2 and is in hardware validation. If you hit a regression, please open an issue.
⚠️ Requirements — POPS binaries are REQUIRED and are NOT included
POPSLoader is only the launcher GUI. It does not ship the proprietary POPS binaries — you must supply them yourself.
POPS binaries — place in <device>:/POPS/ or hdd:/__common/POPS/:
IOPRP252.IMG,POPS.ELF,POPS.PAK,POPS_IOX.PAK— from AnimMouse's POPS-binaries
POPSTARTER — point POPSLoader at a POPSTARTER.ELF (any supported device): mc0:/POPSTARTER/POPSTARTER.ELF, mass:/POPS/POPSTARTER.ELF, mmce:/POPS/POPSTARTER.ELF, mx4sio:/POPS/POPSTARTER.ELF.
PS1 game images — .VCD files in <device>:/POPS/ (or hdd:/__.POPS/). Optional <Title>.png cover art (200×200, 8-bit, non-interlaced RGB(A) PNG) and — new in BETA-12 — an optional <Title>.txt details blurb alongside each VCD.
A memory card in slot 1 (
mc0) is required for settings and BDMA. BDMA is required for every device except HDD (PFS), and only one BDMA mode is active at a time.
🆕 New in BETA-12
Hardware-tester fixes (#494–#497)
- #494 — Settings now load on a cold USB boot. Saving always worked, but the boot-time settings read could fire before the USB drive finished re-mounting, so the config silently fell back to defaults. The read now waits for the mass device and retries (the same self-heal the game-launch path already had).
- #496 — Cover art is pixel-aspect correct per video mode. Covers (and the jewel-case frame) are sized from the source aspect ×
480/SCR.Y, so square art displays square on both NTSC (640×448) and PAL (640×512). (The original "stretched" report turned out to be a 16:9 TV setting — but the per-mode correction is a genuine refinement and is in.) - #497 — The USB "crash" was a false alarm. It was a spurious pre-exec watchdog that could only mis-fire; the block was removed. Genuine post-exec detection stays.
- #495 — Video-standard readback. Settings → Display → Video Standard now shows the live GS output mode/resolution, so a PAL-on-NTSC mismatch is visible without any launch flags.
MX4SIO realigned to the OPL/BDM model
MX4SIO is now treated as a plain passive BDM mass device (like USB): loading the driver is the init, with no synchronous EE-side card-probe that could stall when no card is present. It only comes up when you actually booted from it, when a configured path lives on it, or when you open the MX4SIO page — never speculatively. A crash-marker makes a no-card stall self-recover on the next boot instead of bricking it.
Game list
- Multi-disc collapse — "Multi-disc games → First disc only" (Settings → Game List) hides secondary discs; detection now covers
(Disc N),[Disc N],(Disc N of M),(CD N)(Redump/No-Intro). Deliberately ignores bareDisc N/CD Nsuffixes to avoid hiding standalone magazine/demo/music discs. - Per-game details panel — optional
<Title>.txtshown word-wrapped and centered under the cover art, toggled by a new Game details setting (off by default). Gracefully absent when no.txtexists. - L1 — bounce to ends — jumps to the top of the list; press again to bounce to the bottom (fast nav for 1000+ libraries).
- R1 — rescan in place — re-runs the current device's scan without leaving the page (HDD wipes+rebuilds its cache; MMCE/MX4SIO/USB re-detect + rebuild live) — handy for hotplugging a card/drive.
Reliability & polish
- Single, consistent progress percentage on the loading overlay (#498).
- Boot-page persistence (open a chosen device at boot) with crash-loop protection.
- Source-audit hardening (Gemini + DeepSeek): bounded/guarded file reads, leak/UB fixes in
luasystem/graphics/luaplayer, with no behavior change — these only affect corrupt-asset, read-only-boot, and device-error paths.
📦 Cumulative since BETA-9
- BETA-11 — HDD game list loads when launched from a non-HDD device (cold-drive spin-up retry); DKWDRV from custom HDD paths; BOOT.ELF exit with
reboot_iop=0; launch arguments (-page/-mode/-game/-debug); MMCE pad re-init after on-demandmmceman; HDD game-list cache (R1 rescans); dead-code removal (3D pipeline, md5, device-lock); documentation pass. - BETA-10-5 — the D-10 fix: HDD POPSTARTER + HDD games reliable (PFS unmount before
ExecPS2); launch from wLaunchELF / non-IOP-resetting parents; BOOT.ELF exit restored; per-device settings sidecar (.pldrsnext to the ELF); NHDDL-style launch args; newer SDK device prefixes (usb:/ata:/apa:). - BETA-10 — HDD D-10 POPSTARTER launch fix; BOOT.ELF / wLaunchELF exit black-screen fixed and restored to the Exit menu; UI polish.
- BETA-9 baseline — speed, reliability, and cover-art update.
Full commit history: BETA-9-0...BETA-12
🙏 Testing & credits
Hardware testers — endless real-PS2 testing across many sessions and diagnostic builds:
- @nuno6573 — relentless multi-session HW testing and troubleshooting
- @oldman63 — detailed, reproducible reports driving #494–#499 (incl. catching that #496 was a 16:9 TV setting)
- @provato, @P4NCHOL1NO, @Vizor, @FifthFox ,and the community
- @CosmicScale
- @israpps
- DanielSant0s (https://www.github.com/DanielSant0s)
Design & code — Berion (GUI design), El_isra / israpps (POPSTARTER & code), krHACKen (POPSTARTER), nuno6573 & Ripto (scripts), Daniel Santos (Enceladus base), AnimMouse (POPS binaries). uyjulian, fjtrujy, HWC and others for always helping.
⏳ Known issues / in validation
- The MX4SIO realignment, the #494 USB settings-load retry, and the cover/frame aspect work are source-correct and boot clean on PCSX2; final confirmation on each hardware configuration is ongoing.
- One specific config previously saw "Failed to load HDD" from a non-HDD boot; under investigation. Most setups are unaffected.
💾 Assets
POPSLOADER.ELF— the freshly-built launcher (drop into yourPS1_POPSLOADER/folder).POPSLOADER-rolling-release.zip— the binary + full source snapshot for this exact build.
This program is free and open source. If you bought it, you have been scammed.