Repository navigation
Releases
RetroArch for Switch 2 v0.4.0
RetroArch 1.22.2 for Nintendo Switch 2, built with libounce (ounce-devkit 20261115b, kaiHEN), Vulkan by default.
What's new since v0.3.1
- Run RetroArch from any folder. The release layout is unchanged, but RetroArch can now also live in a single folder anywhere on the card, for example
/switch/apps/retroarch. See "Install in another folder" below. - Movable installs. Folders in
retroarch.cfgand core paths in playlists are now saved relative to RetroArch's own folder, so an install keeps working after it is moved. Paths saved by earlier versions keep working.
Install
Unzip retroarch-switch2-v0.4.0.zip to the root of the SD card, replacing the files from an earlier version. It's a complete drop-in and needs nothing else installed first. It contains:
switch/retroarch/retroarch_switch.nro: the frontendretroarch/cores/*_libretro_libnx.nro: 23 cores, one NRO each (RetroArch with the core built in)retroarch/assets: the menu assets (Ozone, XMB, RGUI, GLUI, sounds)retroarch/info: core info filesretroarch/database/rdb: the databases that playlist scanning uses
No retroarch.cfg is included, so an existing config is kept. On a fresh card RetroArch starts on Vulkan with threaded video and audio rate control off.
Launch RetroArch from hbmenu. If an older config has video_driver = "gl", switch it to vulkan under Settings > Drivers.
Install in another folder
To keep RetroArch in one folder somewhere else, put retroarch_switch.nro and the contents of the zip's retroarch folder together in that folder:
/switch/apps/retroarch/
retroarch_switch.nro
cores/
assets/
info/
database/
RetroArch sees the cores folder next to the frontend and keeps everything in that folder: its config, saves, playlists and retroarch-log.txt. Without a cores folder next to it, the frontend uses the standard layout above. To move an existing install into one folder, move the contents of /retroarch next to the frontend.
MSU-1 with bsnes
Keep the ROM and its MSU-1 files loose in the same folder, all with the ROM's base name:
Game.sfc (or .smc)
Game.msu MSU-1 data
Game-1.pcm soundtrack
Game-2.pcm
...
Load the .sfc with bsnes. The ROM must not be zipped: RetroArch would unpack it to a temporary folder, where bsnes can't find the MSU-1 files.
Cores
Played and working
| Core | System | Tested with |
|---|---|---|
| FCEUmm | NES | Super Mario Bros. 3 |
| Mesen | NES | Super Mario Bros. 3 |
| Snes9x 2010 | SNES | Star Fox, Yoshi's Island, Super Mario RPG |
| bsnes | SNES | An MSU-1 game with its soundtrack |
| mGBA | Game Boy Advance | The Minish Cap, from a fresh install |
| Genesis Plus GX | Mega Drive / Master System | Vectorman, OutRun, Golden Axe, Dragon Crystal |
| PicoDrive | Mega Drive / 32X | Vectorman; Metal Head (32X) at full speed |
| Beetle PCE Fast | PC Engine | Knight Rider Special |
| PCSX ReARMed | PlayStation | Gran Turismo (races included), Metal Gear Solid |
| Mupen64Plus-Next | Nintendo 64 | Paper Mario, Ocarina of Time, Mario Party, Animal Forest, Conker's Bad Fur Day |
| Flycast | Dreamcast | Sonic Adventure, Phantasy Star Online Ver. 2 |
Boots, not played yet: VBA Next (Minish Cap), Beetle SuperGrafx (Knight Rider Special).
Built, not tested yet: Snes9x, Nestopia, QuickNES, Gambatte, Gearboy, SameBoy, Gearsystem, Handy, ProSystem, Stella.
Notes
- Shaders: Vulkan uses slang presets (
.slangp), which aren't included. GLSL shaders only apply to thegldriver. - BIOS: PCSX ReARMed uses its built-in HLE BIOS when there's no real one in
/retroarch/cores/system. PC Engine CD games needsyscard3.pce. - N64 video: ParaLLEl-RDP on Vulkan is the default. GLideN64 needs
video_driver = "gl"for this core, in/retroarch/config/Mupen64Plus-Next/Mupen64Plus-Next.cfg. - N64 ROMs not in the core's database (hacks, some translations) get default settings, so a game's save type can be wrong and its saves may not work.
- Controller profiles: on a fresh install RetroArch offers to download them. It's safe to accept, but it adds nothing: the Switch joypad driver has its controls built in.
- Checksums:
SHA256SUMS.txtlists the zip and every NRO in it.
RetroArch for Switch 2 v0.3.1
RetroArch 1.22.2 for Nintendo Switch 2, built with libounce (ounce-devkit 20261115b, kaiHEN), Vulkan by default.
What's new since v0.3.0
- Much faster Nintendo 64 in heavy scenes. Conker's Bad Fur Day, which ran at about half speed in its heaviest scenes, now runs at full speed throughout. The work behind it helps every game on the default ParaLLEl-RDP/RSP path:
- The RSP no longer pays a thread wake-up for each command it hands to the RDP, which cost up to 7 ms per frame.
- The RSP's vector loads and stores move whole halfwords or 16-byte blocks instead of single bytes, and its multiply-accumulate instructions use native NEON.
- RSP tasks now take their real length before the console reports them done, so games pace themselves the way they do on a real N64. Audio still runs on time.
- Correct build version. The build banner and log now show the commit the release was built from.
Install
Unzip retroarch-switch2-v0.3.1.zip to the root of the SD card, replacing the files from an earlier version. It's a complete drop-in and needs nothing else installed first. It contains:
switch/retroarch/retroarch_switch.nro: the frontendretroarch/cores/*_libretro_libnx.nro: 23 cores, one NRO each (RetroArch with the core built in)retroarch/assets: the menu assets (Ozone, XMB, RGUI, GLUI, sounds)retroarch/info: core info filesretroarch/database/rdb: the databases that playlist scanning uses
No retroarch.cfg is included, so an existing config is kept. On a fresh card RetroArch starts on Vulkan with threaded video and audio rate control off.
Launch RetroArch from hbmenu. If an older config has video_driver = "gl", switch it to vulkan under Settings > Drivers.
MSU-1 with bsnes
Keep the ROM and its MSU-1 files loose in the same folder, all with the ROM's base name:
Game.sfc (or .smc)
Game.msu MSU-1 data
Game-1.pcm soundtrack
Game-2.pcm
...
Load the .sfc with bsnes. The ROM must not be zipped: RetroArch would unpack it to a temporary folder, where bsnes can't find the MSU-1 files.
Cores
Played and working
| Core | System | Tested with |
|---|---|---|
| FCEUmm | NES | Super Mario Bros. 3 |
| Mesen | NES | Super Mario Bros. 3 |
| Snes9x 2010 | SNES | Star Fox, Yoshi's Island, Super Mario RPG |
| bsnes | SNES | An MSU-1 game with its soundtrack |
| mGBA | Game Boy Advance | The Minish Cap, from a fresh install |
| Genesis Plus GX | Mega Drive / Master System | Vectorman, OutRun, Golden Axe, Dragon Crystal |
| PicoDrive | Mega Drive / 32X | Vectorman; Metal Head (32X) at full speed |
| Beetle PCE Fast | PC Engine | Knight Rider Special |
| PCSX ReARMed | PlayStation | Gran Turismo (races included), Metal Gear Solid |
| Mupen64Plus-Next | Nintendo 64 | Paper Mario, Ocarina of Time, Mario Party, Animal Forest, Conker's Bad Fur Day |
| Flycast | Dreamcast | Sonic Adventure, Phantasy Star Online Ver. 2 |
Boots, not played yet: VBA Next (Minish Cap), Beetle SuperGrafx (Knight Rider Special).
Built, not tested yet: Snes9x, Nestopia, QuickNES, Gambatte, Gearboy, SameBoy, Gearsystem, Handy, ProSystem, Stella.
Notes
- Shaders: Vulkan uses slang presets (
.slangp), which aren't included. GLSL shaders only apply to thegldriver. - BIOS: PCSX ReARMed uses its built-in HLE BIOS when there's no real one in
/retroarch/cores/system. PC Engine CD games needsyscard3.pce. - N64 video: ParaLLEl-RDP on Vulkan is the default. GLideN64 needs
video_driver = "gl"for this core, in/retroarch/config/Mupen64Plus-Next/Mupen64Plus-Next.cfg. - N64 ROMs not in the core's database (hacks, some translations) get default settings, so a game's save type can be wrong and its saves may not work.
- Controller profiles: on a fresh install RetroArch offers to download them. It's safe to accept, but it adds nothing: the Switch joypad driver has its controls built in.
- Checksums:
SHA256SUMS.txtlists the zip and every NRO in it.
RetroArch for Switch 2 v0.3.0
RetroArch 1.22.2 for Nintendo Switch 2, built with libounce (ounce-devkit 20261115b, kaiHEN), Vulkan by default.
What's new since v0.2.2
- bsnes added, with MSU-1. bsnes (libretro's bsnes v115) is now in the release as
bsnes_libretro_libnx.nro. It plays MSU-1 games and hacks with their CD-quality soundtracks. See "MSU-1 with bsnes" below for how to lay out the files. - Faster Nintendo 64. Mupen64Plus-Next's ParaLLEl-RDP hands its commands to the GPU thread through a lock-free ring, which cut that per-frame cost in Paper Mario from about 8.6 ms to about 1.9 ms. Its dynarec also sends about 25% fewer code-publish calls during scene changes.
- ounce-devkit 20261115b. Every core and the frontend are rebuilt from scratch on it. Its OunceVK fixes how the Vulkan driver frees and reuses GPU memory, and it now waits out slow GPU service calls instead of giving up.
Install
Unzip retroarch-switch2-v0.3.0.zip to the root of the SD card, replacing the files from an earlier version. It's a complete drop-in and needs nothing else installed first. It contains:
switch/retroarch/retroarch_switch.nro: the frontendretroarch/cores/*_libretro_libnx.nro: 23 cores, one NRO each (RetroArch with the core built in)retroarch/assets: the menu assets (Ozone, XMB, RGUI, GLUI, sounds)retroarch/info: core info filesretroarch/database/rdb: the databases that playlist scanning uses
No retroarch.cfg is included, so an existing config is kept. On a fresh card RetroArch starts on Vulkan with threaded video and audio rate control off.
Launch RetroArch from hbmenu. If an older config has video_driver = "gl", switch it to vulkan under Settings > Drivers.
MSU-1 with bsnes
Keep the ROM and its MSU-1 files loose in the same folder, all with the ROM's base name:
Game.sfc (or .smc)
Game.msu MSU-1 data
Game-1.pcm soundtrack
Game-2.pcm
...
Load the .sfc with bsnes. The ROM must not be zipped: RetroArch would unpack it to a temporary folder, where bsnes can't find the MSU-1 files.
Cores
Played and working
| Core | System | Tested with |
|---|---|---|
| FCEUmm | NES | Super Mario Bros. 3 |
| Mesen | NES | Super Mario Bros. 3 |
| Snes9x 2010 | SNES | Star Fox, Yoshi's Island, Super Mario RPG |
| bsnes | SNES | An MSU-1 game with its soundtrack |
| mGBA | Game Boy Advance | The Minish Cap, from a fresh install |
| Genesis Plus GX | Mega Drive / Master System | Vectorman, OutRun, Golden Axe, Dragon Crystal |
| PicoDrive | Mega Drive / 32X | Vectorman; Metal Head (32X) at full speed |
| Beetle PCE Fast | PC Engine | Knight Rider Special |
| PCSX ReARMed | PlayStation | Gran Turismo (races included), Metal Gear Solid |
| Mupen64Plus-Next | Nintendo 64 | Paper Mario |
| Flycast | Dreamcast | Sonic Adventure, Phantasy Star Online Ver. 2 |
Boots, not played yet: VBA Next (Minish Cap), Beetle SuperGrafx (Knight Rider Special).
Built, not tested yet: Snes9x, Nestopia, QuickNES, Gambatte, Gearboy, SameBoy, Gearsystem, Handy, ProSystem, Stella.
Notes
- Shaders: Vulkan uses slang presets (
.slangp), which aren't included. GLSL shaders only apply to thegldriver. - BIOS: PCSX ReARMed uses its built-in HLE BIOS when there's no real one in
/retroarch/cores/system. PC Engine CD games needsyscard3.pce. - N64 video: ParaLLEl-RDP on Vulkan is the default. GLideN64 needs
video_driver = "gl"for this core, in/retroarch/config/Mupen64Plus-Next/Mupen64Plus-Next.cfg. - Controller profiles: on a fresh install RetroArch offers to download them. It's safe to accept, but it adds nothing: the Switch joypad driver has its controls built in.
- Checksums:
SHA256SUMS.txtlists the zip and every NRO in it.
RetroArch for Switch 2 v0.2.2
RetroArch 1.22.2 for Nintendo Switch 2, built with libounce (ounce-devkit 20261114, kaiHEN), Vulkan by default.
v0.2.1 rebuilt from scratch on ounce-devkit 20261114. The RetroArch and core code is unchanged.
Changes since v0.2.1
- ounce-devkit 20261114: every core and the frontend are rebuilt on the new devkit. Its only change is in OunceVK, the Vulkan driver: a fix to how it waits for GPU work to complete. libounce and kaiHEN are unchanged.
- This matters most for the Vulkan renderers: the frontend, Flycast and Mupen64Plus-Next (ParaLLEl-RDP).
- Tested on hardware: Flycast (Sonic Adventure) runs and exits cleanly.
Install
Unzip retroarch-switch2-v0.2.2.zip to the root of the SD card, replacing the files from an earlier version. It's a complete drop-in and needs nothing else installed first. It contains:
switch/retroarch/retroarch_switch.nro: the frontendretroarch/cores/*_libretro_libnx.nro: 22 cores, one NRO each (RetroArch with the core built in)retroarch/assets: the menu assets (Ozone, XMB, RGUI, GLUI, sounds)retroarch/info: core info filesretroarch/database/rdb: the databases that playlist scanning uses
No retroarch.cfg is included, so an existing config is kept. On a fresh card RetroArch starts on Vulkan with threaded video and audio rate control off.
Launch RetroArch from hbmenu. If an older config has video_driver = "gl", switch it to vulkan under Settings > Drivers.
Fixes in v0.2.1
- Crash when starting a game after any download.
- The frontend closed the Switch socket service before RetroArch closed its network connections.
- On a fresh install, RetroArch offers to download controller profiles, so the first game you started crashed before the core ran.
- The same crash followed any other use of the Online Updater.
- Sockets now close last.
- A config that couldn't be read was overwritten.
- When a core couldn't read
retroarch.cfgwhile starting, it ran on the built-in defaults and saved them over your config on exit. - Now the log says why the read failed, and the config is left alone.
- When a core couldn't read
- Vulkan is the built-in default. v0.2.0's built-in default was OpenGL ES (
gl), so a fresh card or a reset config started on GL.
On a fresh install RetroArch still offers to download controller profiles. You can accept it now that it doesn't crash, but it adds nothing: the download has no profiles for the Switch joypad driver, whose controls are built in. Declining is fine.
Cores
Played and working
| Core | System | Tested with |
|---|---|---|
| FCEUmm | NES | Super Mario Bros. 3 |
| Mesen | NES | Super Mario Bros. 3 |
| Snes9x 2010 | SNES | Star Fox, Yoshi's Island, Super Mario RPG |
| Genesis Plus GX | Mega Drive / Master System | Vectorman, OutRun, Golden Axe, Dragon Crystal |
| PicoDrive | Mega Drive / 32X | Vectorman; Metal Head (32X) at full speed |
| PCSX ReARMed | PlayStation | Gran Turismo (races included), Metal Gear Solid |
| Flycast | Dreamcast | Sonic Adventure, Phantasy Star Online Ver. 2 |
| Mupen64Plus-Next | Nintendo 64 | Paper Mario |
| mGBA | Game Boy Advance | The Minish Cap, from a fresh install |
| Beetle PCE Fast | PC Engine | Knight Rider Special |
Boots, not played yet: VBA Next (Minish Cap), Beetle SuperGrafx (Knight Rider Special).
Built, not tested yet: Snes9x, Nestopia, QuickNES, Gambatte, Gearboy, SameBoy, Gearsystem, Handy, ProSystem, Stella.
Notes
- Shaders: Vulkan uses slang presets (
.slangp), which aren't included. GLSL shaders only apply to thegldriver. - BIOS: PCSX ReARMed uses its built-in HLE BIOS when there's no real one in
/retroarch/cores/system. PC Engine CD games needsyscard3.pce. - N64 video: ParaLLEl-RDP on Vulkan is the default. GLideN64 needs
video_driver = "gl"for this core, in/retroarch/config/Mupen64Plus-Next/Mupen64Plus-Next.cfg. - Checksums:
SHA256SUMS.txtlists the zip and every NRO in it.
RetroArch for Switch 2 v0.2.1
RetroArch 1.22.2 for Nintendo Switch 2, built with libounce (ounce-devkit 20261113f, kaiHEN), Vulkan by default.
This is a bug-fix release for v0.2.0. Everyone on v0.2.0 should update: on a fresh install, v0.2.0 crashes the first time you start a game.
Install
Unzip retroarch-switch2-v0.2.1.zip to the root of the SD card, replacing the files from an earlier version. It's a complete drop-in and needs nothing else installed first. It contains:
switch/retroarch/retroarch_switch.nro: the frontendretroarch/cores/*_libretro_libnx.nro: 22 cores, one NRO each (RetroArch with the core built in)retroarch/assets: the menu assets (Ozone, XMB, RGUI, GLUI, sounds)retroarch/info: core info filesretroarch/database/rdb: the databases that playlist scanning uses
No retroarch.cfg is included, so an existing config is kept. On a fresh card RetroArch starts on Vulkan with threaded video and audio rate control off.
Launch RetroArch from hbmenu. If an older config has video_driver = "gl", switch it to vulkan under Settings > Drivers.
Fixes since v0.2.0
- Crash when starting a game after any download.
- The frontend closed the Switch socket service before RetroArch closed its network connections.
- On a fresh install, RetroArch offers to download controller profiles, so the first game you started crashed before the core ran.
- The same crash followed any other use of the Online Updater.
- Sockets now close last.
- A config that couldn't be read was overwritten.
- When a core couldn't read
retroarch.cfgwhile starting, it ran on the built-in defaults and saved them over your config on exit. - Now the log says why the read failed, and the config is left alone.
- When a core couldn't read
- Vulkan is the built-in default. v0.2.0's built-in default was OpenGL ES (
gl), so a fresh card or a reset config started on GL.
On a fresh install RetroArch still offers to download controller profiles. You can accept it now that it doesn't crash, but it adds nothing: the download has no profiles for the Switch joypad driver, whose controls are built in. Declining is fine.
Cores
Played and working
| Core | System | Tested with |
|---|---|---|
| FCEUmm | NES | Super Mario Bros. 3 |
| Mesen | NES | Super Mario Bros. 3 |
| Snes9x 2010 | SNES | Star Fox, Yoshi's Island, Super Mario RPG |
| Genesis Plus GX | Mega Drive / Master System | Vectorman, OutRun, Golden Axe, Dragon Crystal |
| PicoDrive | Mega Drive / 32X | Vectorman; Metal Head (32X) at full speed |
| PCSX ReARMed | PlayStation | Gran Turismo (races included), Metal Gear Solid |
| Flycast | Dreamcast | Sonic Adventure, Phantasy Star Online Ver. 2 |
| Mupen64Plus-Next | Nintendo 64 | Paper Mario |
| mGBA | Game Boy Advance | The Minish Cap, from a fresh install |
| Beetle PCE Fast | PC Engine | Knight Rider Special |
Boots, not played yet: VBA Next (Minish Cap), Beetle SuperGrafx (Knight Rider Special).
Built, not tested yet: Snes9x, Nestopia, QuickNES, Gambatte, Gearboy, SameBoy, Gearsystem, Handy, ProSystem, Stella.
Notes
- Shaders: Vulkan uses slang presets (
.slangp), which aren't included. GLSL shaders only apply to thegldriver. - BIOS: PCSX ReARMed uses its built-in HLE BIOS when there's no real one in
/retroarch/cores/system. PC Engine CD games needsyscard3.pce. - N64 video: ParaLLEl-RDP on Vulkan is the default. GLideN64 needs
video_driver = "gl"for this core, in/retroarch/config/Mupen64Plus-Next/Mupen64Plus-Next.cfg. - Checksums:
SHA256SUMS.txtlists the zip and every NRO in it.
RetroArch for Switch 2 v0.2.0
RetroArch 1.22.2 for Nintendo Switch 2, built with libounce (ounce-devkit 20261113f, kaiHEN), Vulkan by default.
This release adds the N64 core and rebuilds everything from scratch on the new devkit. It contains no debug tracing.
Install
Unzip retroarch-switch2-v0.2.0.zip to the root of the SD card. It's a complete drop-in and needs nothing else installed first. It contains:
switch/retroarch/retroarch_switch.nro: the frontendretroarch/cores/*_libretro_libnx.nro: 22 cores, one NRO each (RetroArch with the core built in)retroarch/assets: the menu assets (Ozone, XMB, RGUI, GLUI, sounds)retroarch/info: core info filesretroarch/database/rdb: the databases that playlist scanning uses
No retroarch.cfg is included, so an existing config is kept. On a fresh card the built-in defaults are the tested settings: Vulkan, threaded video, and audio rate control off.
Launch RetroArch from hbmenu. If an older config has video_driver = "gl", switch it to vulkan under Settings > Drivers.
Cores
Played and working
| Core | System | Tested with |
|---|---|---|
| FCEUmm | NES | Super Mario Bros. 3 |
| Mesen | NES | Super Mario Bros. 3 |
| Snes9x 2010 | SNES | Star Fox, Yoshi's Island, Super Mario RPG |
| Genesis Plus GX | Mega Drive / Master System | Vectorman, OutRun, Golden Axe, Dragon Crystal |
| PicoDrive | Mega Drive / 32X | Vectorman; Metal Head (32X) at full speed |
| PCSX ReARMed | PlayStation | Gran Turismo (races included), Metal Gear Solid |
| Flycast | Dreamcast | Sonic Adventure, Phantasy Star Online Ver. 2 |
| Mupen64Plus-Next | Nintendo 64 | Paper Mario |
| Beetle PCE Fast | PC Engine | Knight Rider Special |
Boots, not played yet: mGBA and VBA Next (Minish Cap), Beetle SuperGrafx (Knight Rider Special).
Built, not tested yet: Snes9x, Nestopia, QuickNES, Gambatte, Gearboy, SameBoy, Gearsystem, Handy, ProSystem, Stella.
What's new since v0.1.0
- Nintendo 64 (Mupen64Plus-Next):
- Defaults to ParaLLEl-RDP on Vulkan, with the ParaLLEl-RSP JIT and the N64 dynarec on the Switch 2 code memory.
- Paper Mario's texture problems are fixed.
- GLideN64 is still in the core options; it needs
video_driver = "gl"for this core, in/retroarch/config/Mupen64Plus-Next/Mupen64Plus-Next.cfg.
- New devkit: everything is rebuilt from scratch on ounce-devkit 20261113f, where OunceHEN is now kaiHEN. The JIT cores (PCSX ReARMed, PicoDrive, Flycast, Mupen64Plus-Next) use its publish call.
- PCSX ReARMed: code from the compile thread is made runnable on the emulator thread as the new devkit requires.
Earlier fixes (v0.1.0)
- Vulkan video driver (OunceVK), the default. OpenGL ES 3 is still available as
gl. - Flycast: a JIT on the Switch 2 code memory, and software write tracking for self-modifying code.
- PCSX ReARMed: the dynarec with a compile thread, and the fix for Gran Turismo freezing when a race loads.
- PicoDrive: the SH2 dynarec runs, so 32X games work.
Notes
- Shaders: Vulkan uses slang presets (
.slangp), which aren't included. GLSL shaders only apply to thegldriver. - BIOS: PCSX ReARMed uses its built-in HLE BIOS when there's no real one in
/retroarch/cores/system. PC Engine CD games needsyscard3.pce. - Checksums:
SHA256SUMS.txtlists the zip and every NRO in it.
RetroArch for Switch 2 v0.1.0 (Vulkan test release)
RetroArch 1.22.2 for Nintendo Switch 2, built with libounce (ounce-sdk 20261113), Vulkan by default.
This is a test release ahead of the public release. It contains no debug tracing.
Install
Unzip retroarch-switch2-v0.1.0.zip to the root of the SD card. It's a complete drop-in and needs nothing else installed first. It contains:
switch/retroarch/retroarch_switch.nro: the frontendretroarch/cores/*_libretro_libnx.nro: 21 cores, one NRO each (RetroArch with the core built in)retroarch/assets: the menu assets (Ozone, XMB, RGUI, GLUI, sounds)retroarch/info: core info filesretroarch/database/rdb: the databases that playlist scanning uses
No retroarch.cfg is included, so an existing config is kept. On a fresh card the built-in defaults are the tested settings: Vulkan, threaded video, and audio rate control off.
Launch RetroArch from hbmenu. If an older config has video_driver = "gl", switch it to vulkan under Settings > Drivers.
Cores
Played and working
| Core | System | Tested with |
|---|---|---|
| FCEUmm | NES | Super Mario Bros. 3 |
| Mesen | NES | Super Mario Bros. 3 |
| Snes9x 2010 | SNES | Star Fox, Yoshi's Island, Super Mario RPG |
| Genesis Plus GX | Mega Drive / Master System | Vectorman, OutRun, Golden Axe, Dragon Crystal |
| PicoDrive | Mega Drive / 32X | Vectorman; Metal Head (32X) at full speed |
| PCSX ReARMed | PlayStation | Gran Turismo (races included), Metal Gear Solid |
| Flycast | Dreamcast | Sonic Adventure, Phantasy Star Online Ver. 2 |
| Beetle PCE Fast | PC Engine | Knight Rider Special |
Boots, not played yet: mGBA and VBA Next (Minish Cap), Beetle SuperGrafx (Knight Rider Special).
Built, not tested yet: Snes9x, Nestopia, QuickNES, Gambatte, Gearboy, SameBoy, Gearsystem, Handy, ProSystem, Stella.
Not in this release: Mupen64Plus-Next (N64), which still has texture issues.
What's new
- Vulkan video driver (OunceVK), the default. OpenGL ES 3 is still available as
gl. - Dreamcast (Flycast): a JIT on the Switch 2 code memory, and software write tracking for self-modifying code.
- PlayStation (PCSX ReARMed): the dynarec runs, with a compile thread. Fixed Gran Turismo freezing when a race loads.
- 32X (PicoDrive): the SH2 dynarec runs. 32X games used to crash the core.
Notes
- Shaders: Vulkan uses slang presets (
.slangp). The GLSL shaders from earlier builds only apply to thegldriver. - BIOS: PCSX ReARMed uses its built-in HLE BIOS when there's no real one in
/retroarch/cores/system. PC Engine CD games needsyscard3.pce. - Checksums:
SHA256SUMS.txtlists the zip and every NRO in it.