Skip to content

Prysm 1.7

Latest

Choose a tag to compare

@NicholasPratt NicholasPratt released this 20 Nov 14:23
· 1 commit to main since this release

Prysm 1.7: a pin matrix for routing, a compressor and a safety limiter, six-channel USB audio for recording stems, drum pan, plus SYNC oscillators, Juno and Dimension chorus modes, and snare ghosts and rolls.

Install: the web installer (Chrome or Edge), or python3 tools/fm1_install.py prysm-1.7.fwsc. Manual: docs/MANUAL.md. Your saved sounds, patterns and song carry over (patch format 26: older sounds open with the routing they had, nothing goes into COMP or USB's U2 / U3 until you pin it, and the drums start centred).

New

  • ROUTE screen (press HOME three times): a pin matrix like a patch-panel synth's, each pin a level from 0 to 127. Route each oscillator, the noise, each drum, the filter (each part's, with two parts) and each effect into the filter, any effect after it, OUT, or the USB stems. A new sound starts as the classic chain.
  • COMP: a stereo compressor with a soft knee: THRESH, RATIO (1:1 .. 20:1, LIMIT), ATTACK, RELEASE, GAIN and MIX for parallel compression. Nothing goes into it until you pin something there, such as the drums for a pumping bus, or the whole mix.
  • Safety limiter on the output: nothing goes past full scale. It adds no latency and does nothing until it's needed.
  • Six-channel USB audio: channels 1-2 are the master as before. Channels 3-4 (U2) and 5-6 (U3) carry whatever you pin into the ROUTE screen's U2 and U3 columns, at 44.1 or 48 kHz with named channels and no driver. You can record the drums and the synth on separate tracks, or a dry and a wet version of one part.
  • Drum PAN: each drum's place in the stereo field (DRUM page, KNOB4 on its row), saved with the sound.
  • SYNC mode for the modulators: the carrier hard-synced to a silent master. The rate (SYNC1 / SYNC2, x1 .. x16) can be swept by the modulator's envelope, which loops attack then decay.
  • Chorus modes: FREE as before, I, II and I+II after the Juno-60, and DIM 1 .. 4 and the combinations after the Dimension D. In the fixed modes DEPTH becomes WIDTH.
  • Drums: snare ghost notes (in the HIT cycle, with their own level), snare rolls, and pads over MIDI recorded as ghost, hit or accent by velocity.
  • DUAL polymetre: part B can have its own pattern length.
  • Delay self-oscillation at the top of FDBK, saturated so it settles into a drone rather than clipping hard. DLYTIME is now a destination for the mod envelopes and the matrix.
  • SEQ and LOOP: SELECT, or the POLY row's EDIT knob, switches the part you edit without leaving the page. The header shows which part.

Changed

  • Routing lives on the ROUTE screen. The FILTER / DIRECT switches, DUAL's sends and the drums' FILTER / DELAY / REVERB sends are gone from the other pages, and sounds from earlier versions keep the routing they had.
  • FX pages follow the chain: CRUSH, MOD FX, CHORUS, DELAY, REVERB, COMP (FX steps through them). Each page shows the chain as boxes, its own highlighted, three to a screen, with an arrow where it carries on.

Note

Six-channel USB audio is new. Its descriptors and packets are checked on a computer, in the same form ChoralRoot's six channels use, but it hasn't been tried on every host yet. If the audio input doesn't appear or glitches, please open an issue and say which computer and app you used.