Skip to content

Releases

OpenBlade 0.65.1-nightly.117+ba223b16

Pre-release

Choose a tag to compare

@github-actions github-actions released this 20 Nov 02:34
ba223b1

Automated test build from the latest committed main.

[0.65.1-nightly.117] - 2026-11-20

Added

  • Add keyboard-only host-rendered lighting effects and per-key color editing on Blade 18 (2025, RZ09-0529). Keep Vapor Chamber RGB unavailable until its prior state can be restored; no touchpad RGB zone is claimed. (#977)

Fixed

  • Install PawnIO for CPU temperatures when a previous PawnIO removal left only its stopped driver service behind, instead of stopping setup. (#978)

This is a prerelease and is available only to users who select the Nightly update channel.
Verify OpenBlade-Setup.exe with the attached SHA-256 file before installing.

OpenBlade 0.64.2-nightly.116+57b69bbf

Pre-release

Choose a tag to compare

@github-actions github-actions released this 16 Nov 17:23
57b69bb

Automated test build from the latest committed main.

[0.64.2-nightly.116] - 2026-11-16

Added

  • Add source-reviewed CPU Voltage Optimizer support for Blade 14 (2024, 8945HS) and Blade 14 (2023, 7940HS), with complete per-core readback and restoration. Share live voltage planning and recovery with Blade 16 (2025). (#973)

Fixed

  • Avoid rejecting a valid PawnIO CPU temperature driver because Windows reports its path differently. Include the registered path and package checks in installer logs. (#975)
  • Wait for the installed service process to exit before replacing or removing OpenBlade files, including broker installs, and retain actionable recovery paths if shutdown or restoration cannot be confirmed. (#974)

This is a prerelease and is available only to users who select the Nightly update channel.
Verify OpenBlade-Setup.exe with the attached SHA-256 file before installing.

OpenBlade 0.63.2-nightly.115+bdc5956c

Pre-release

Choose a tag to compare

@github-actions github-actions released this 14 Nov 18:54
bdc5956

Automated test build from the latest committed main.

[0.63.2-nightly.115] - 2026-11-14

Added

  • Offer all model-supported performance modes, including Custom and HyperBoost, on sufficient and limited external adapters. Preserve separate profiles, firmware power management and battery-drain notifications. (#964)
  • Expand source-reviewed fixed fan speeds and host curves with per-preset firmware limits, add full-power AC host curves in the existing fixed-fan presets on RZ09-0482/RZ09-0483, add Creator on RZ09-0328 and Maximum Power on RZ09-0530, and preserve saved fan settings when live limits change. (#968)

Fixed

  • Finish local broker installations by recognizing supported input helpers and waiting for startup inventory to settle before opening OpenBlade. (#966)
  • Keep HyperBoost recovery bound to the confirmed power source after an upgrade, and prevent shared native build caches from reusing stale code or release metadata. (#964)
  • Accept a valid PawnIO CPU temperature driver when uninstall/reinstall leaves disconnected device registrations. Report the present-device count when the binding remains missing or ambiguous. (#970)
  • Keep source-supported ordinary controls available when Windows confirms external power but adapter wattage cannot be read, without guessing charger type or changing the reported power classification. (#967)
  • Avoid rejecting supported battery-setting replies and allow a short confirmation window on source-reviewed Blade models. (#965)

This is a prerelease and is available only to users who select the Nightly update channel.
Verify OpenBlade-Setup.exe with the attached SHA-256 file before installing.

OpenBlade 0.61.1-nightly.114+97b3ea5a

Pre-release

Choose a tag to compare

@github-actions github-actions released this 13 Nov 13:13
97b3ea5

Automated test build from the latest committed main.

[0.61.1-nightly.114] - 2026-11-13

Added

  • Expand source-reviewed lighting with independent brightness and available logo controls on 15 Blade profiles, MCU-backed keyboard effects on seven models, and software Fire on Blade 16 RZ09-0581. Existing field-only profiles keep their behavior. (#960)

Fixed

  • Open the matching settings page and scroll to its card when selecting a profile summary, including cards hidden in Customize. Show the active profile first in the compact view. (#961)
  • Show the failing installer step and underlying error, including separate cleanup or recovery failures, instead of only a generic error code. Include Setup diagnostics in the main installer log so a single shared log contains the failure details. (#952)
  • Fix unlit ISO and Japanese keys in keyboard lighting on Blade 16 RZ09-0581 and RZ09-0528. (#958)
  • Explain unavailable startup and lighting controls when another Razer app is running or cannot be checked. (#954)

This is a prerelease and is available only to users who select the Nightly update channel.
Verify OpenBlade-Setup.exe with the attached SHA-256 file before installing.

OpenBlade 0.60.0-nightly.113+36f75d16

Pre-release

Choose a tag to compare

@github-actions github-actions released this 12 Nov 21:04
36f75d1

Automated test build from the latest committed main.

[0.60.0-nightly.113] - 2026-11-12

Added

  • Add Static, Ambient Awareness, Audio Meter, and software lighting effects on Blade 14 (2023/2025) and Blade 16 (2023). (#953)
  • Add Reactive, Ripple, and Keyboard .chroma imports on Blade 14 (2025) using its firmware-derived key map. (#953)
  • Support Blade 15 Advanced (Mid 2021) RZ09-0409 and both 2019 Blade Pro 17 variants, RZ09-0287 and RZ09-0314, with source-reviewed Balanced/Custom performance and Automatic fan handback. Physical validation remains pending. (#951)

This is a prerelease and is available only to users who select the Nightly update channel.
Verify OpenBlade-Setup.exe with the attached SHA-256 file before installing.

OpenBlade 0.58.7-nightly.112+fbba40d0

Pre-release

Choose a tag to compare

@github-actions github-actions released this 12 Nov 09:38
fbba40d

Automated test build from the latest committed main.

[0.58.7-nightly.112] - 2026-11-12

Fixed

  • Fix keyboard and logo controls blocked by Wave readback, and prevent unnecessary lighting retries on source-reviewed models. (#947)
  • Keep laptop and cooling-pad fan curves responsive to hot, idle GPUs while skipping temperature reads for GPUs reported powered down. Require GPU cooling evidence before Battery Saver fan stop. (#946)

This is a prerelease and is available only to users who select the Nightly update channel.
Verify OpenBlade-Setup.exe with the attached SHA-256 file before installing.

OpenBlade 0.58.5-nightly.111+0d1d981e

Pre-release

Choose a tag to compare

@github-actions github-actions released this 10 Nov 18:03
0d1d981

Automated test build from the latest committed main.

[0.58.5-nightly.111] - 2026-11-10

Fixed

  • Fix internal display brightness errors when Windows omits the change status. (#942)
  • Allow Setup to recover from a dropped service connection during startup. (#942)

This is a prerelease and is available only to users who select the Nightly update channel.
Verify OpenBlade-Setup.exe with the attached SHA-256 file before installing.

OpenBlade 0.58.4

Choose a tag to compare

@boyuanx boyuanx released this 10 Nov 04:04
1d2689d

[0.58.4] - 2026-11-09

Fixed

  • Suppress the plugged-in battery discharge warning above, at, or up to five percentage points below the active charge limit. (#935)
  • Fix false failure messages after changing internal display brightness. (#939)

This stable release also includes the changes shipped since Stable v0.50.3. See the full changelog.

Built from 1d2689d1. The Windows installer is unsigned. Verify the download with the accompanying SHA-256 checksum.

OpenBlade 0.58.2-nightly.110+8de8cf3c

Pre-release

Choose a tag to compare

@github-actions github-actions released this 09 Nov 22:53
8de8cf3

Automated test build from the latest committed main.

[0.58.2-nightly.110] - 2026-11-09

Fixed

  • Fix laptop detection after a fresh install or upgrade by restoring the required machine-data permissions. (#912)

This is a prerelease and is available only to users who select the Nightly update channel.
Verify OpenBlade-Setup.exe with the attached SHA-256 file before installing.

OpenBlade 0.57.1-nightly.109+05277db9

Pre-release

Choose a tag to compare

@github-actions github-actions released this 08 Nov 17:54
05277db

Automated test build from the latest committed main.

[0.57.1-nightly.109] - 2026-11-08

Added

  • Add experimental Stop/Auto fan controls for the Blade 16 RZ09-0581 in USB-C Balanced, with rolling average temperature limits, immediate cutoffs and automatic stopping below 50°C. (#879)
  • Bundle CPU temperature monitoring through LibreHardwareMonitor and PawnIO. (#879)
  • Add an offline firmware CLI, register explorer and developer diagnostics. (#879)
  • Control Razer Laptop Cooling Pad fan targets, temperature curves, lighting and keyboard lighting sync from its own page, shown when connected. Support is experimental and based on reviewed vendor definitions. (#889)
  • Support Blade 15 Advanced (Mid 2019) RZ09-0301 with Balanced/Custom performance, Balanced fixed fans and host curves on full-power AC, independent keyboard brightness and logo controls. (#890)
  • Search OpenBlade pages and settings from the title bar. Press Ctrl+K to open search and jump to a result. (#883)
  • Adjust the running CPU's all-core Voltage Optimizer on Blade 16 (2025, RZ09-0528) with the supported AMD driver already running. Off preserves the remembered offset. (#887)
  • Support Blade 15 Base (2019) RZ09-0300, Blade 15 Advanced (Early 2020) RZ09-0330 and Blade 15 Base (Late 2020) RZ09-0351 with reviewed preset controls and Automatic fans. Advanced Custom CPU/GPU levels are bounded to Low/Medium/High; physical validation remains pending. (#888)
  • Support Blade 14 (2024) RZ09-0508, Blade 16 (2024) RZ09-0510, Blade 18 (2024) RZ09-0509 and Blade 18 (2025) RZ09-0529 with reviewed model-specific controls. (#888)
  • Support Blade 14 (2021) RZ09-0370, Blade 14 (2022) RZ09-0427, Blade 15 (2022) RZ09-0421 and Blade 17 (2022) RZ09-0423 with reviewed performance controls and model-specific charge limits. Physical validation is tracked separately. (#888)
  • Add model-specific Turbo, Maximum Power, Gaming and Creator presets, each with separate Windows power-mode preferences. (#888)

Changed

  • Use a source-verified Rust component for reports and selected profile merges. The Windows UI and service remain C#. (#895, #897)
  • Shorten the README support section in English, Chinese and Russian, with model details in the support guide. (#890)
  • Document exact BIOS/EC source findings for Blade 16 RZ09-0581 and RZ09-0528. (#890)
  • Open Labs from the sidebar to learn about experimental features and jump to their controls. A beaker marks experimental controls on the Lighting page. (#885)
  • List source-reviewed laptops as officially supported and track physical validation separately. (#888)

Fixed

  • Fix CPU temperatures stuck at 45°C. (#879, #890)
  • Use Custom temperature cutoffs for Stop entry and improve fan-state diagnostics and recovery. (#879)
  • Change directly between Fixed fans and host curves in an admitted preset on source-reviewed backends. (#890)
  • Stop treating constant ACPI values as CPU temperature, so custom fan curves use the existing maximum-speed fallback when no CPU sensor is available. (#890)
  • Preserve cancellation when a queued service request resumes. (#887)
  • Preserve the original diagnostic stage when a CPU read times out. (#887)
  • Keep older app clients in a readable, read-only upgrade view when the service exposes newer presets and settings. (#888)
  • Recover thermal controls when unrelated charge-limit readings are unavailable, while retaining strict confirmation for pending battery operations. (#888)
  • Clear Maximum Fans before applying Battery Balanced on Blade 14, 16 and 18 (2024), including after disconnecting AC power. (#888)
  • Allow paused charge-limit controls to resume after successful recovery on source-reviewed models. (#888)
  • Preserve saved Windows power modes, app rules and brightness when migrating profiles. (#888)
  • Apply and verify the internal display's active signal rate when selecting a fixed refresh rate. (#886)
  • Keep Dynamic Refresh Rate available after choosing a low fixed rate when the panel and driver support a higher timing. (#886)
  • Apply an app profile's refresh rate only when OpenBlade can restore the previous rate. (#886)

This is a prerelease and is available only to users who select the Nightly update channel.
Verify OpenBlade-Setup.exe with the attached SHA-256 file before installing.