Skip to content

Releases

Apollo II for NVDA 1.2

Choose a tag to compare

@OnjLouis OnjLouis released this 21 Oct 18:03

Apollo II for NVDA 1.2

Add voice changes and sound effects inside text with explicit double-brace commands.
Enable Allow inline commands in NVDA's Speech settings; it is off by default.

  • Change rate, pitch, intonation, word and phrase pauses, voicing, speaker table,
    presets and formant offsets within a passage.
  • Play all sixteen firmware sound effects, or insert a short silent effect.
  • Adjust relative volume without changing your saved volume setting.
  • Use {{reset}} to restore your configured controls for subsequent text.
  • Read marked text in NVDA or render it with SoundWave's normal text capture.
  • The manual includes a complete supported-command table, examples and limits.

For example:

Normal speech. {{@F4}}Lower pitch. {{@T8}}{{reset}}Normal again.

Changes are local to each supplied speech sequence; separate paragraphs or lines
may need repeated markers during Say All. Save NVDA's configuration before opening
SoundWave's voice dialog so its separate driver loads the enabled option.
Ordinary speech, spelling, Say All, playback indexing and saved controls are unchanged.
Presets are approximations, not exact hardware reproductions or a calibrated singing interface.

Use SoundWave 1.2.14 or later to avoid its separate temporary-driver control-ring
issue, which was discovered and fixed during this release's testing.

Requires NVDA 2026.2 or later on 64-bit Windows. Existing users can use the signed
update checker in NVDA Settings. Original Apollo II Reborn attribution and licence
notices are retained; the complete native source is included in this repository.

Apollo II for NVDA 1.1

Choose a tag to compare

@OnjLouis OnjLouis released this 20 Oct 20:36

Apollo II for NVDA 1.1

Choose between Juno (calibrated) and Apollo II (original) in NVDA's Speech
settings or synthesizer settings ring.

  • The original profile preserves the upstream Apollo II Reborn pronunciations,
    intonation behaviour and tonal character, before our Juno adjustments.
  • The calibrated Juno voice is unchanged and remains selected when upgrading.
  • Both profiles support NVDA audio output, spelling, Say All, pause, interruption,
    rate, pitch, volume, intonation, bass and treble.
  • An existing version 1.0 voice dictionary is preserved for Juno without
    overwriting a newer dictionary. The original voice has its own voice dictionary.
  • The manual explains how to compare the profiles. Turn Read numbers as words
    off for the firmware's original number handling; otherwise 1 becomes the word
    "one" before the selected voice receives it. Set bass and treble to 50 for
    a comparison without additional EQ. NVDA dictionaries can also affect results.

The original profile is the reconstruction from
Apollo II Reborn by rommix0,
not a claim of exact original-hardware audio. The Juno calibration remains an
independent hardware-reference interpretation. Existing credits and licences
are retained.

Requires NVDA 2026.2 or later on 64-bit Windows. Install the add-on and restart
NVDA. Existing users can use the signed update checker in NVDA Settings.

The complete corresponding native host source and build instructions are
included in this repository and the source archive.

Apollo II for NVDA 1.0

Choose a tag to compare

@OnjLouis OnjLouis released this 20 Oct 16:10

Apollo II for NVDA 1.0

Initial release of a local UK English voice based on
Dolphin Apollo II Reborn by rommix0,
with pronunciation, tone and intonation adjustments measured against a Dolphin Juno.

  • Uses NVDA's selected speech output device, with spelling, Say All, playback-timed indexes, pause and interruption support.
  • Offers rate, pitch, volume, intonation, bass and treble controls.
  • Includes optional English number and 24-hour time reading.
  • Corrects the digit 1, the sample and terminal word families, and says using Juno comparisons.
  • Includes signed updates, configurable Never/Hourly/Daily checks and Check now in NVDA Settings.

Requires NVDA 2026.2 or later on 64-bit Windows. Install apolloJuno-1.0.nvda-addon,
restart NVDA, then select Apollo II for NVDA in the synthesizer dialog.
No external hardware or voice download is required. This is an approximation,
not an exact recreation of every Apollo or Juno revision.

The manual
includes controls, limitations and full credits. Corresponding native host source
and CMake build instructions are included in the repository and source archive.

The upstream author has explicitly permitted GPL licensing of the NVDA add-on.
Existing third-party notices are preserved. This is not an official Dolphin product.